Ocean Digital WR-210N User manual

WR-210N
Internet Radio
User Manual
Please read this user manual carefully before using the receiver

Location of Controls ........................................... .......1..
Remote control ...........................................................3
How to input password for your wireless network ...........4
1. Getting started ......................................................6
2. Charging battery ...................................................7
3 8. Network Setup ......................................................
4 . 10. Overview of features and functions .............. ........
5 11. Internet Radio .....................................................
6 14. Media Centre ......................................................
7. Bluetooth playback ..............................................16
8. Alarm Setting ......................................................17
9. Sleep Timer Setting .............................................19
1 . Configuration ......................................................0 20
11. Remote control via PC / Smart phone
- Tuning internet radio & manage favourite .............27
12. Trouble Shooting .................................................31
Helpful Tips ..............................................................33
Technical Specification ..............................................35
In the box .................................................................36
Contents

1
14 5 6 78 9 10
11 12 13 14
23
Location of Controls

2
Location of Controls
1.
Press and hold to power on/off
Press and release to Standby / activate the radio
(Standby is enabled only when power is connected. It
will be disabled when battery power is used)
2. Speaker
3.
Return to Home screen / Return to the playing screen
4.
Access local stations via internet
5.
Press and hold to preset a particular station
Press to recall the favourite list
6. ◄
Back to previous menu/left pointer
7. Infared sensor
8. ►
Right pointer/Enter edit menu of the Favourite list
/Display the big time clock & radio info on the now
playing screen
9. Tune / Select / Volume
Rotate to scroll along, up/down on the menu / Select
menu options
Push to confirm / push to stop / resume playback of
radio channel
Rotate to adjust the volume level
10. TFT color screen 2.4"
11. USB port to connect USB-C cable for charging
built-in battery
12. LED indicator for battery charging status
13. Line output jack 3.5 mm
14. Earphone jack 3.5 mm

3
1. : Press to toggle between Standby
and Operation (applicable only when
Standby is enabled with power
connected to the radio)
2. : Mute
3. 0-9: Input index number on the list /
input characters for WiFi password
4. : Preset the now playing station to
Favorite
5. ▲ : Up pointer
6. ◄ : Left pointer/back to previous menu
7. : Alarm
8. : Sleep Timer
9. Mode: Switch between Internet
radio/Bluetooth/Media Centre
10. : Home screen
11. : Previous station on the list /
previous track on bluetooth / Media
Centre
12. Local: Access the local station list via
internet
(Local area can be set up in
Configuration)
13. : Recall the favorite list
14. OK: confirm button
15. ► : Right pointer
Remote Control
16. ▼: Down pointer
17. Vol+: Volume up
18. Vol-: Volume down
19. EQ: Equalizer
20. : Next station on the list/next track on bluetooth /
Media Centre
21. : Play/pause for Bluetooth/Media Centre
Play/stop for Internet radio
22. Dimmer: Access the Dimmer menu to adjust the
brightness of the display
23. Info: Quick access to Network and System information

4
Using remote control
On the alpha-numeric keypad, press the button
repeatedly to cycle through the characters assigned to
each button. Refer to the following list.
To input a character, highlight it and press the OK button
to confirm and input the next character. When it comes to
the last character of the password, press and hold [OK] to
complete the entry.
Button 1: 1 and different kind of symbols
!@#$%^&*()_+[]{};:'”\|,./<>?
Button 2: 2ABCabc
Button 3: 3DEFdef
Button 4: 4GHIghi
Button 5: 5JKLjkl
Button 6: 6MNOmno
Button 7: 7PQRSpqrs
Button 8: 8TUVtuv
Button 9: 9WXYZwxyz
Button 0: 0
Using control button on the radio unit
Use the [Tune/Select] knob to scroll through the
characters, highlight it and press [Tune/Select] button to
confirm and input the next character. When it comes to the
last character of the password , press and hold
[Tune/Select] to confirm and complete the entry.
Note: The password is case sensitive.
How to input password for your wireless network

5
Please ensure the following is ready:
You have a broadband internet connection.
A wireless broadband router is connected to the internet
successfully. The radio supports Wireless B, G and N
connection (Wireless N router can also be used with the
setting on B or G). You know the Wired Equivalent Privacy
(WEP) or Wi-Fi Protected Access (WPA) data encryption
code/password. You need to key in the correct code when
the radio is connected to the wireless router for network
connection. If you do not know the code/password, please
contact the person/technician who set up the
router/network for you.
The radio works via Wireless network connection (Wi-Fi
connection).
Precautions
The radio should not be used in a high temperature or high
humidity environment over prolonged periods of time as
this may damage the unit.
Keep the radio away from liquids as it may get damaged.
Please switch off the radio immediately if water or liquids
is spilled into the radio. Consult with the shop you bought
this radio for any question.
Avoid using or storing the unit in dusty or sandy
environment. Do not open and repair the radio by yourself.
Clean only with dry cloth.
Before you start

6
The radio is powered by the built-in lithium battery. A USB
cable is supplied in the product package.
Press and hold the [ ] button to power on.
To power off the radio, press and hold the same button.
The Standby mode is enabled only when the power is
connected and so to make use of the Alarm clock function.
Connect the power supply to the radio, press and hold the
[ ] button to turn it on. Pressing the [ ] button again
will turn the radio into standby.
Getting started

7
You can check the level of battery power remains on the
radio.
There is a battery power indicator showing on the top
row of the screen.
When battery power is low, the battery indicator keeps
blinking as a reminder for battery charging.
To charge the battery, connect the USB-C plug to the port
where located at the rear side of the radio, connect the
other end to a power source supplied in 5V OUT (the
rating of the electric current is minimum 1A or higher), The
LED on the rear side of the radio will light up in red
indicates the battery is charging. The charging icon
will appear on the screen.
When charging is done, the LED on the rear side will turn
to green and the icon on screen will change to . it
means the radio has the power connected.
Note: The charging might take much longer to
complete if the radio is playing while charging.
Charging battery

8
Internet connection is setup via Wireless network (WiFi).
Your radio requires a broadband Internet connection.
• If this is first time use, the Configure Network wizard will
be displayed. Choose Yes to start configuring network.
Press the [ ◄ ] button or turn the [Tune/Select] knob to
highlight Yes and press [Tune/Select] to confirm.
• Select Add/Remove AP from the list, use the
[Tune/Select] knob to scroll and press it to confirm, then
choose Add AP (Scan):
• It will start scanning the Wi-Fi networks available. Scroll
to your network and press [OK] on remote control or the
[Tune/Select] to confirm. If your wifi network has a
password protected, it will ask you to enter the
passphrase/password. Please refer to the above section
'How to input password for your wireless network' on
P.3.
3. Network Setup
12:01am
Configure Network?
Yes No
←to previous →to next SelectOK whendone
12:01am
Network Options >
Wi-Fi Channels >
< Add/Remove Ap >
AP:[] >
Network 3/7
12:01am
Add/Remove AP 1/4
< Add AP(Scan) >
Add AP(WPS button) >
Add AP(SmartConfig) >
Remove AP >