Ocean Digital WR-800F User manual

Please read this user manual carefully before using the receiver.
WR-800F
Stereo Internet Radio
User Manual
Please read this user manual carefully before using the receiver

- 3 -
Location of Controls .......................................................... ......... 4
Remote control ..........................................................................6
Entering the passcode of the wireless network .............................7
1. To start up ............................................................................9
2 10. Network Setup ...................................................................
3 11. Overview of features and functions ......................................
4. Internet Radio ....................................................................12
5 14. Media Centre .....................................................................
6. FM Radio ...........................................................................15
7. Bluetooth playback .............................................................16
8. Alarm Setting .....................................................................17
9. Sleep Timer Setting ............................................................18
10. Configuration .....................................................................19
11. Remote control via PC / Smart phone
- Tuning internet radio & manage favourite ...........................24
12. Trouble Shooting ................................................................27
Helpful Tips .............................................................................29
Technical Specification .............................................................30
In the box ................................................................................31
Contents

- 4 -
Location of Controls
1 2 3 4 5 6 7 89
10 11 13 14
15
12
16 17 18 19

- 5 -
1.
Press to toggle between Standby & Operational
2.
Press to display the sleep timer intervals: 15/30/45/60/90/120/180 minutes
3.
Press to recall Favorite list; long press to add a playing station to favorite list
4. Preset button 1-3
Assign the top 3 favorites to the button 1-3
Press and hold to preset
Press it briefly to recall
5.
Access Home screen/Press this button to return to the now playing screen (or
until you see the now playing station)
6. ◄
Press to return to the last level up
7. ►
Press to display various information under the now playing screen; enter the
Favorite's edit menu by long pressing the button
8. 3.5mm headphone jack
9. Remote sensor
10. Micro SD/TF card slot
Micro SD/TF card playback (insert the card with metal contacts up)
11. VOLUME/MUTE
Rotate to adjust volume, press to mute
12. TFT color screen 2.8''
13. NAVIGATE/ENTER
Rotate to dial up / down, press to Enter
14. Speaker
15. Power on/off switch
16. DC IN Jack
17. Line out jack 3.5 mm
18. Aux in jack 3.5 mm
19. Telescopic antenna
Location of Controls

- 6 -
1. : Press to toggle between Standby and
Operation
2. : Mute
3. 0-9: Input index number on the list / input
characters for WiFi passcode
4. : Preset the now playing station to Favorite
5. ▲ : Cursor up
6. ◄ : Cursor left / back to previous menu
7. : Alarm button
8. : Sleep Timer
9. Mode: Switching between the radio modes
10. : Home
11. : Previous station on the list/previous track on
bluetooth/Media Centre
12. Local: Access the local station list (The region
can be set up in Configuration)
13. : Recall the favorite list
14. OK: confirm button
15. ► : Cursor right
16. ▼: Cursor down
17. Vol+: Volume up
18. Vol-: Volume down
19. EQ: Equalizer
20. : Next station on the list/next track on
bluetooth/Media Centre
21. : Play/pause for Bluetooth/Media Centre
Play/stop for Internet radio
22. Dimmer: Access the Dimmer menu to adjust the
brightness of the display
23. Info: Quick access to Network and System
information
Remote Control

- 7 -
Using remote control
On the alpha-numeric keypad, press the button repeatedly to cycle through the
characters assigned to each button. Refer to the following list.
To input a character, highlight it and press the [ OK ] button to confirm and input the
next character. When it comes to the last character of the password, press and hold
[OK] to complete the entry.
Button 1: 1 and different kind of symbols !@#$%^&*()_+[]{};:'”\|,./<>?
Button 2: 2ABCabc
Button 3: 3DEFdef
Button 4: 4GHIghi
Button 5: 5JKLjkl
Button 6: 6MNOmno
Button 7: 7PQRSpqrs
Button 8: 8TUVtuv
Button 9: 9WXYZwxyz
Button 0: 0
Using control button on the radio unit
Use the [NAVIGATE / ENTER] knob to scroll through the characters, highlight it and
press [NAVIGATE / ENTER] knob to confirm and input the next character. When it
comes to the last character of the password , press and hold [NAVIGATE / ENTER]
to confirm and complete the entry.
Note: The password is case sensitive.
Entering the passcode of the wireless network

- 8 -
Please ensure the following is ready:
You have a broadband internet connection.
A wireless broadband router is connected to the internet successfully. The radio
supports Wireless B, G and N connection (Wireless N router can also be used with
the setting on B or G). You know the Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption code/password. You need to key in the
correct code when the radio is connected to the wireless router for network
connection. If you do not know the code/password, please contact the
person/technician who set up the router/network for you.
The radio can work via Wireless network connection (Wi-Fi connection).
Precautions
The radio should not be used in a high temperature or high humidity environment
over prolonged periods of time as this may damage the unit.
Keep the radio away from liquids as it may get damaged. Please switch off the radio
immediately if water or liquids is spilled into the radio. Consult with the shop you
bought this radio for any question.
Avoid using or storing the unit in dusty or sandy environment. Do not open and
repair the radio by yourself.
Clean only with dry cloth.
Before you start

- 9 -
• Remove internet radio from the package box.
• Plug in the power adapter and turn the radio on by the power switch located at the
rear panel of the radio.
◦ Caution: Use only the adaptor supplied with the radio. Connecting a power
supply with a different rating will cause permanent damage to the radio and may be
hazardous.
Once the radio is powered on, the first thing is to choose the preferred language.
Rotate the [NAVIGATE/ENTER] knob and press to confirm the choice.
1. To start up

- 10 -
Internet connection is setup via Wireless network (WiFi).
A broadband internet connection is required.
• If this is first time use, the Configure Network wizard will be displayed. Choose Yes
to start configuring network. Press the [ ◄ ] button to highlight Yes and press
[NAVIGATE/ENTER] to confirm.
• Select Add/Remove AP from the list, use the [NAVIGATE/ENTER] knob to scroll
and press it to confirm, then choose Add AP (Scan):
• It will start scanning the Wi-Fi networks available. Scroll to your network and press
[NAVIGATE/ENTER] or [OK] on remote control to confirm. If your wifi network has a
password protected, it will ask you to enter the passphrase/password. Please refer
to the above section ‘Entering the passcode of the wireless network' on P.7.
Note: The password is case sensitive. Please consult with the one who setup your
network if you don't know the password.
• When the Wi-Fi connection is successful, the Association Complete will be shown
briefly. The wifi signal bar will appear on the top left corner of the display:
2. Network Setup
Wi-Fi signal bar
12:01am
Configure Network?
Yes No
←to previous →to next SelectOK whendone
12:01am
Network Options >
Wi-Fi Channels >
< Add/Remove Ap >
AP:[] >
Network 3/7
12:01am
Add/Remove AP 1/4
< Add AP(Scan) >
Add AP(WPS button) >
Add AP(SmartConfig) >
Remove AP >