Ocean Digital WR-210CB User manual

Using buttons on the Radio
1. Rotate the Volume/Select knob to browse the numbers/symbols/
characters available, press the <Right >key to enter and move to the
next entry.
2. When the last character is entered, press <Volume/Select> to confirm
and it will start associating with your network. Do NOT press the right key
for the last character entry.
3. It will start associating with your network.
After the radio is powered up, follow the steps on the display to Add router,
it will start scanning the routers available and display a list after scanning is
done. Choose your router from the list. If your network is enabled with securi-
ty protection, you will be asked to enter the passcode to connect with your
network.
Follow the steps below to enter the passcode on your radio:
Quick Start Guide
Entering security key of your Router
Rotate to browse characters
 
Press to confirm
10:10
A A
INPUT:  MOVE OK
Enter Password
2/2
Volume/Select Knob
Volume/Select Knob Press “Right” key

WR-210CB
Any questions, feel free to contact our support team at
[email protected]
Using remote control
1. Use the alpha-numeric keypad on the remote control, press the button
repeatedly to cycle through the selections.
2. Press the key to enter and move to the next entry.
3. When the last character is entered, press <OK> to confirm and it will
start associating with your network. Do NOT press the right key for the last
character entry.
We have multi-language PDF user manual on our website,
please scan the QR code to download if you need.