2
Operating Instructions and Parts Manual 24548
INTERMEDIATE
U-JOINT PULLER
11/18
2018 OEMTOOLS™
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn the
product’s applications and limitations, as well as potential
hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work
areas invite accidents.
3. Keep children away. All children should be kept away from
the work area. Never let a child handle tools or equipment
without strict adult supervision.
4. DO NOT operate this product if under the influence of alcohol
or drugs. Read warning labels on prescriptions to determine
if your judgment or reflexes are impaired while taking drugs. If
there is any doubt, DO NOT attempt to operate.
5. Use safety equipment. Eye protection should be worn at all
times when operating this tool. Use ANSI approved safety
glasses. Everyday eyeglasses are NOT safety glasses. Dust
mask, non-skid safety shoes, hard hat or hearing protection
should be used in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this product. Keep all apparel clear of the product.
7. DO NOT overreach. Keep proper footing and balance at all
times when operating this product.
8. Check for damage. Check equipment regularly. If part of
the product is damaged, it should be carefully inspected
to make sure that it can perform its intended function
correctly. If in doubt, discontinue use of product.
9. Keep away from flammables. DO NOT attempt to operate
this product near flammable materials or combustibles.
Failure to comply may cause serious injury or death.
10. Store this product out of the reach of children and
untrained persons. This product may be dangerous in the
hands of untrained users.
11. Keep this product dry and clean.
12. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one product may become hazardous when
used on another product.
13. Service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
14. When servicing a product, use only identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
15. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. DO NOT use this
product in a damp or wet location.
16. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS™for a replacement.
17. Keep this product dry, clean, and free from brake fluid, oil,
and grease.
18. Avoid accidental fire and/or explosion. DO NOT smoke
near this product.
19. The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations
that may occur. The operator must understand that common
sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
20. We believe the information contained herein to be
reliable. However, general technical information is given
by us without charge and the user shall employ such
information at their own discretion and risk. We assume no
responsibility for results or damages incurred from the use
of such information in whole or in part.
21. The manufacturer declines any and all responsibility for
property damage or injury if said damage is the result of
unskillful handling by the operator or of failure to observe
the basic safety rules set forth in the instruction manual.
22. The procedures documented in this manual are to serve
as guidelines for the use of this equipment.
23. The use of this equipment is simple and straightforward
if you follow the instructions. When operating this
equipment, use common sense, and only use this
equipment for its intended purpose.
PRODUCT DESCRIPTION
The OEMTOOLS™24548 Intermediate U-Joint Puller easily
removes seized U-joint cups on most intermediate trucks, buses
and light industrial/farm equipment.
PRODUCT SPECIFICATIONS
Product Dimensions: 7.32" x 5.12" x 2.32"
Product Weight: 5.5 Lbs.
Applications: Intermediate Trucks, Buses,
Light Industrial/Farm Equipment
Bearing Cup
Outside Diameter: 1.25"- 1.7"
CONTENTS
U-Joint Puller (1), Instruction Manual (1)
SPECIFIC SAFETY INSTRUCTIONS AND WARNINGS
WARNING: Thoroughly read and understand the provided
product manual before attempting to use this product.
WARNING: DO NOT place fingers, extremities or
clothing between puller and the driveline.
WARNING: DO NOT place fingers, extremities or
clothing between the puller glove and the puller frame.
WARNING: Ensure the U-Joint Puller is properly and
securely mounted before attempting to extract U-joint cup.
Improper mount can lead to injury, especially when an
impact wrench is used.
CAUTION: DO NOT alter this product.
CAUTION: Be careful of sharp edges and pinch points.
RECOMMENDED TOOLS FOR OPERATION
1. 9/16" Wrench or Adjustable Wrench
2. 9/16"Impact Grade Socket
3. 1/2"Drive (or smaller) Impact Wrench
OPERATION INSTRUCTIONS
IMPORTANT:Clean and lubricate forcing screw threads,
lower glove contact points and cap assembly prior to each
use. Debris in screw threads can cause puller damage and
malfunction.
1. Remove all fasteners from the bearing cups.
2. Slip the U-Joint Puller Glove over the driveshaft yoke.
3. Use a 9/16" wrench or socket to rotate the forcing screw
clockwise. A 1/2"drive impact wrench (or smaller) may be
used.
4. Rotate the forcing screw until the bearing cup is released.
5. Rotate driveshaft. Repeat steps 1-4 to remove opposite
bearing cup, then remaining (2) bearing cups.
