Okamura Alt Piazza Series User manual

【Cafe table】
Instructions for Use
Creative Furniture
Series
アルトピアッツァ
Materials and Surface Finish
Part Materials Surface finish
Tabletop
Surfacing, coaming Melamine board ー
Core material MDF ー
Rear surface Phenol ー
Leg Leg, tray Steel Baking finish
Base Base Steel Baking finish
Adjuster Main body Recycled ABS 〉Recycled ABS〈ー
Axle part Steel ー
> XX < indicates the materials of the parts. This information is useful for recycling.
Please understand that product specifications might change without prior notification due to improvements made to the
product.
Cafe table
900 φ
Cafe table
600W×750D
GD2968
2019-02
INTERNATIONALSALES&MARKETINGDIVISION
2-14-27,Akasaka,Minato-ku,Tokyo107-0052,JAPAN
Tel:[phone]Fax:[phone]
http:
//
www . okamura.jp
/
OKAMURACORPORATION

1 2
Part Names
■ Cafe table (base diameter 600φ)
(900φ/750φ/750 square)
■Cafe table (rectangle)
（600W×750D）
■Cafe table (base diameter 450φ)
(600φ/450φ)
Tabletop
Tabletop
Leg
Adjuster
Adjuster
Base
Leg
Base
Adjuster
Tabletop
Base
Leg
User must follow this instruction to prevent accidents and injuries, or damages to
their property.
Caution
Safety Instructions (Make sure to follow these instructions)
Caution
●Many chemical substances will be released by the product when it is first purchased. Sufficiently
ventilate or expose the product to moving air for some time after purchasing it.
●Do not completely close windows when using the product in rooms with conspicuously high
temperatures/humidity (the benchmarks for these are temperatures in excess of 28°C (82.4°F) and
relative humidity in excess of 50%).
Appropriate Ventilation Measures
Installation
Please follow instructions below.
Failure to do so may cause serious damage to the product and Okamura will have no
responsibility for any disadvantages.
Do not lean against or sit
on the table. It may cause
you to fall and result in
injury.
Caution
Do not handle roughly, or use
improperly. It may cause injury or
damage to the product.
●Do not use as a stepstool.
If the product is found unstable due to
loosening of bolts or screws, retighten
them.
Be careful of the following items since
they may cause injury or damage the
product.
●Do not lean on or sit on the tabletop.
●Do not use the product with any part loose or
missing.
●Do not move the product while objects are
placed on the tabletop.
Do not use with bolts and screws
loosen.
It may cause damage to the product
and result in injury.
Do not disassemble or repair on your
own.
●Do not attempt to disassemble or repair the
product yourself. Please contact our official
dealers when needed.
■Instruction on caution label
●The caution label shown on the
right is attached on this product
to avoid safety hazards or
damage to the user's life, body,
and property. Use this product
observing the written cautions.
●Do not tear, damage, erase
words of, or remove the label.
Consult your local distributor or our
official dealer for the available optional
items.
Do not modify on your own.
This leads to malfunction or accident.
●Modifying the product by yourself may cause
the product to malfunction.
Okamura is not responsible for any damages
caused by modification.
●Please contact an official Okamura dealer
in advance when the product requires any
modifications.
Do not exceed the maximum loading
capacity as it may result in collapse or
damage.
Loading part Maximum loading capacity
Tabletop 30kg (66lb)
(uniformly distributed weight)
What is “Uniformly distributed weight”?
It means to load on a work surface, etc. evenly.
Uneven loading on the product may cause balance
loss and thus drop or fall.
Use the product indoors.
●Do not use outdoors or near water. It may
cause warping or mold.
Do not expose the product to direct
sunlight. It causes distortion or
discoloration of the product.
●Always use curtains, blinds, or the like to
protect the product from direct sunlight when
placing it next to windows or the like.
Avoid high temperature, high humidity,
or extraordinary aridity.
Do not place the product under a heater
or air-conditioner exhausting high
temperature air.
Place the product on a horizontal
surface.
●Be sure to place the product on a horizontal
surface. Failure to do so may cause
deformation of the product.
●Use the adjuster to keep the product
horizontal to the floor surface.

3 4
●Tighten loose bolts and screws on a regular
basis.
●If the product is found unstable due to loose
bolts or screws, retighten them as soon as
possible.
●This instruction manual is very important, so
store it in an easily accessible location.
●Regular maintenance is recommended for
long product life.
Make requests to us immediately when a
repair or inspection is needed (fees required
after expiration of warranty).
●Do not use sharp objects such as a knife on
the tabletop as it may cause scratches or
damages to the surface.
●If the product gets wet with water, wipe off
with dry and soft cloth.
●If you spill tea, coffee, detergent, medicine,
or some other liquid on the product, wipe off
immediately.
Operation Guide
■Base adjustment
If the table wobbles due to uneven floor
surfaces, use the adjuster for the base to
keep the table horizontal to the floor surface.
When using the adjuster, ensure that
more than two people provide rigid
support using extreme caution.
Caution
Adjuster
LowerHigher
7mm
Base
【The number of adjusters and the locations (per base)】
Adjuster
［450φround base］［600φround base］［650×500 rectangle base］
Please follow instructions below. Failure to do so may cause serious damage to the product
and Okamura will have no responsibility for any damages.
Instructions to Extend the Life of Product
Operating Precautions and Maintenance
For daily care
Wooden part
●Wipe gently along the grain with a soft, clean,
dry cloth.
●If the product becomes noticeably dirty,
remove the dirt using a soft cloth dampened
with water, then use a dry cloth to absorb
water residue.
●For a more thorough cleaning we recommend
using a mild cleaner (thin neutral detergent).
〈Caution〉
●Do not use the following as they may damage
the coating.
◎ Thinner, benzene, alcohol , lacquer, oil,
vineg ar, boilin g w at er, poli s her, e tc.
●Frequent wiping with a damp cloth may cause
cracking of the coating. It is recommended
to use a dry soft cloth or our wiping cloths for
daily care.
Resin part
●Wipe off with a soft cloth dampened with
water.
●When it gets dirty, moisten the cloth with thin
neutral detergent and squeeze it hard to
wipe.
Wipe clean with a damp cloth. Be sure to
wipe detergent completely and wipe again
with a dry cloth to dry it.
Steel part
●Wipe off with a dry soft clean cloth.
●If moisture is collected or substances such
as fingerprints or sebum are adhered,
wipe it off immediately. Leaving moisture,
liquid, fingerprints, or sebum on the surface
accelerates oxidation of the steel part and
deteriorates gloss and texture.