Olimpia splendid Maestro Pro 01925 User manual

12 HP Model# 01925
INVERTER

WARNINGS
1.
2.
3.
4.
5.
6.
TheunitcontainsR-410Awhich isafluorinated refrigerant. Installation must comply with current
laws whether local, state or national.
Theunitmaybeusedbychildrenover8yearsofageandbypersonswithreducedphysical,sensory
ormentalcapacities,orwithouttherequiredexperienceorknowledge,providedtheyare supervised
and have been instructed in the safe use of the unit and understand the hazards involved.
Ifthepowercableisdamaged,itmustbereplacedbyaqualifiedtechniciantopreventanyriskto
theuser.
Installation,initialstart-upandsubsequentmaintenance mustbecarriedout by a qualified
technician. TTo avoid serious injury or death end users should limit the maintenance they might
perform to cleaning or replacing the air filter(s).
Topreventanyriskofelectricshocks,itismandatorytodisconnecttheplugfromthepowersocket
and/or to switch off the main switch before performing any electrical connection and any maintenance
operation on the appliances.
Duringinstallation,respectthereferencestotheminimumspacesindicatedinfigure2.
2
MAIN INDEX
Descriptive Illustrations
The illustrations provided on pages 8 through 18 of this manual are
intended to identify components and aid in the installation process.
0 - WARNINGS................................................................................................................................ 4
0.1 - GENERAL INFORMATION .............................................................................................................4
0.2 - SYMBOLS.......................................................................................................................................4
0.2.1- EDITORIAL PICTOGRAMS..............................................................................................................5
0.3 - GENERAL WARNINGS...................................................................................................................5-7
1 -DESCRIPTION OF THE UNIT ...................................................................................................18
1.1 - LIST OF THE COMPONENTS SUPPLIED .....................................................................................18
1.2 - STORAGE.......................................................................................................................................19
1.3 - RECEIPT AND UNPACKING .........................................................................................................19
1.4 - DESCRIPTION OF COMPONENTS................................................................................................19
2 - INSTALLATION ....................................................................................................................... 20
2.1 -INSTRUCTIONS FOR INSTALLATION...............................................................................................20
2.2 - SIZE AND SPECIFICATIONS OF THE SPACE................................................................................. 20
2.3 - CHOOSING THE POSITION OF THE UNIT................................................................................. 21
2.4 - UNIT ASSEMBLY ..........................................................................................................................21
2.4.1 - Drilling the wall ..............................................................................................................................21
2.4.2 - Preparing the condensate discharge.............................................................................................22
2.4.3 - Assembly of the air ducts and external grids..................................................................................23
2.4.4 - Preparing the holes on the machine...............................................................................................23
2.4.5 - Positioning of the device on the anchor brackets...........................................................................24
2.4.6 - Electric hook-up..............................................................................................................................24
2.5 -
TOP/BOTTOM INSTALLATION CONFIGURATION.......................................................................25
2.5.1-Electronicconfigurationforlowerorupperwallinstallations.........................................................25
2.6 -
ENERGY BOOST/SYSTEM ENABLE CONTACT INPUT.............................................................26
2.7 -
ACCESSORIES B014, B1015.....................................................................................................26
DESCRIPTIVE ILLUSTRATIONS...................................................................................................8-18
NOTE: This manual is written for the USA market with values with both Standard and Meter values.
Other languages are available, such a Spanish and French as per UL60335-2-40.

3
3 -USE ........................................................................................................................................ 27
3.1 - WARNINGS...................................................................................................................................27
3.2 - Description of the warning panel ..................................................................................................27
3.3 - CONTROL PANEL NOTIFICATIONS ............................................................................................28
3.4 - USE OF THE REMOTE CONTROL..............................................................................................29
3.4.1- Insertion of batteries...................................................................................................................30
3.4.2- Replacement of batteries ...........................................................................................................30
3.4.3 - location of the remote controller................................................................................................30
3.5 - DESCRIPTION OF REMOTE CONTROL.....................................................................................31
3.5.1- Description of the remote control keys.......................................................................................31
3.5.2- Description of the remote control display ...................................................................................31
3.6 - DESCRIPTION OF UNIT FUNCTIONS........................................................................................32
3.6.1- Main switch-on and running management .................................................................................32
3.6.2- ECO key......................................................................................................................................32
3.6.3 - Turning the unit ON/OFF ...............................................................................................................32
3.6.4 - Operation in “Cooling” mode only.................................................................................................. 32
3.6.5-Operationin“Dehumidification”modeonly ...................................................................................32
3.6.6 - Operation in “FAN” mode only ............................................................................................................33
3.6.7 - Operation in “Spa” mode only (Automatic) ....................................................................................33
3.6.8-Operationin“Heating”modeonly(onlymodelsfittedwithheatingpump)....................................33
3.6.9-Checkingairflowdirection .............................................................................................................33
3.6.10 - Checking fan speed .....................................................................................................................33
3.6.11 - SILENT key ...................................................................................................................................34
3.6.12 - Timer setting..................................................................................................................................34
3.6.13 - Timer and clock setting .................................................................................................................34
3.6.14 - Timer setting..................................................................................................................................35
3.6.15 - Timer activation and deactivation.................................................................................................35
3.6.16 - Reset of all the remote control functions.......................................................................................35
3.6.17 - Managing the unit if the remote control is not available................................................................36
3.7 - RECOMMENDATIONS FOR ENERGY SAVINGS.........................................................................36
4 - MAINTENANCE AND CLEANING .......................................................................................... 36
4.1 - CLEANING....................................................................................................................................36
4.1.1 - Appliance and remote control cleaning ........................................................................................36
4.1.2-Cleaningtheairfilter ....................................................................................................................36
4.2 - Maintenance..................................................................................................................................37
4.2.1 - Routine maintenance ....................................................................................................................37
4.2.2 - Condensation water drainage in case of emergency .......................................................................37
4.3 - DIAGNOSIS, ALARMS AND INCONVENIENCES........................................................................38
4.3.1 - Diagnosis of the inconveniences...................................................................................................38
4.3.2 - Functional aspects not to be mistaken for anomalies ...................................................................38
4.3.3 - Console alarms .............................................................................................................................38
4.3.4 - Anomalies and remedies...............................................................................................................39
5 - TECHNICAL DATA................................................................................................................... 40
6 - WARRANTY.............................................................................................................................. 41
7 - STARTUP and TROUBLESHOOTING DATA SHEET............................................................... 42

4
0 - WARNINGS
0.1 - GENERAL INFORMATION
Thisdocumentisconfidentialpursuanttothelawandmaynotbereproducedor
transferred to third parties without the explicit authorization of the manufacturer.
the appliance may undergo updates and therefore have details different from those
represented or explained in this manual.
0.2 - SYMBOLS
the pictograms in the next chapter provide the necessary information for correct, safe
use of the machine in a rapid, unmistakable way.
0.2.1 - Editorial pictograms
Service
Refers to situations in which you should inform the Ser ViCe department in the company:
CUSTOMER TECHNICAL SERVICE.
Index
Paragraphs marked with this symbol contain very important information and
recommendations, particularly as regards safety. Failure to comply with them may
result in danger of injury to the operators, loss of the warranty, refusal of liability by
the manufacturer.
Raised hand
Refers to actions that absolutely must not be performed.
DANGER OF HIGH VOLTAGE
Signals to the personnel that the operation described could cause electrocution if not
performed according to the safety rules.
GENERIC DANGER
Informs that if the operation is not carried out in compliance with the safety
regulations, it presents the risk of suffering physical damage.
DANGER DUE TO HEAT
Informs that if operation of the unit is not carried out in compliance with the
safety regulations, it presents the risk of burns due to contact with components at
very high temperatures.
DO NOT COVER
indicates that it is prohibited to cover the unit, to prevent over-heating.
ATTENTION
Indicates that this document must be read carefully before installing or using
the unit and the unit must be applied following the directions in the installation
manual.

0.3 - GENERAL WARNINGS
1. This document is restricted in use to the terms of the law and may not be
copied or transferred to third parties without the express authorization of the
manufacturer, OLIMPIA SPLENDID. Our units are subject to change and some parts
may appear different from the ones shown here, without this affecting the text of the
manual in any way.
2. Read this manual carefully before performing any operation (installation,
maintenance, use) and follow the instructions contained in each chapter. Make all
persons involved in the installation of the unit aware of these instructions.
3. THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGES TO PERSONS OR
PROPERTY CAUSED BY FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL.
4. The manufacturer reserves the right to make any changes it deems
advisable to its models, although the essential features described in this manual
remain the same.
5. The installation and maintenance of units like this one may be hazardous as they
contain refrigerant under pressure as well as powered parts. As such the installation,
first startup and subsequent maintenanceshouldbecarriedoutexclusivelyby
qualifiedpersonnel.
6. Failing to comply with the instructions contained in this manual, and using the unit
with temperatures exceeding the permissible temperature range will invalidate the
warranty.
7. Routine maintenance of the filters and general external cleaning can be
performedbytheend user
8. During installation and maintenance, respect the precautions indicated in the
manual, and on the labels applied inside the units. The unit must also be applied
and installed with respect to local and national codes.
9. Always wear gloves and protective goggles when performing any operations on the
refrigeration side of the unit.
10. Units must not be installed in areas containing inflammable gasses, or in very
humid environments (laundries, greenhouses, etc.), or in places where there
equipment will generate unacceptable amounts of heat.
11. Use only original OLIMPIA SPLENDID parts.
WHEN USING ELECTRICAL EQUIPMENT BASIC SAFETY PRECAUTIONS MUST
ALWAYS BE FOLLOWED IN ORDER TO REDUCE RISKS OF FIRE, ELECTRIC
SHOCKS AND INJURY, INCLUDING THE FOLLOWING:
5