olympia electronics LumiGate GR-7610 i-OLEG User manual

Technical data
Battery protection
Over charge protection / deep discharge protection
CPU Quad Core 1,8GHz
RAM
2GB
Memory 32GB Flash
Indication LEDs
Power / Battery / Faults
Buttons Power-ON, Reset
Connectivity
1x USB 2.0 port, 1x USB 3.0 port, 1x Ethernet port (RJ-45), WiFi (801.11n)
Display 7” capacitive touch IPS display (1024x600)
IP rating
IP20
Dimensions 220 x 145 x 66 mm
Gross- / net weight
1510 / 1100 gr
Colour White
Materials
ABS / PC
Mounting method Wall mounted, desktop
Approvals
EN 62479:2010, EN 62311:2008, EN 62368-1:2014 +AC:2015,
ETSI EN 301 489-1 V1.9.2, ETSI EN 301 489-17 V2.2.1,
EN 55032:2013 +AC:2013, EN 55024:2010, ETSI EN 300 328 V2.1.1
GR-7610 i-OLEG Olympia Electronics LumiGate
923761000_09_005
TECHNICAL CHARACTERISTICS
220-240VAC / 50-60Hz
23VA
1Hour
5 to 40 C
o
ABS/PC
White
IP20
Wall mounting / Desktop
-40 to 70 C
o
Up to 95%
2 years (1 year for the battery)
1002gr.
220 x 66 x 145 mm
AMBIENT TEMPERATURE RANGE
HOUSING MATERIALS
STORAGE TEMPERATURE RANGE
MAXIMUM RELATIVE HUMIDITY
DIMENSIONS (L x W x H)
WEIGHT
WARRANTY
BATTERY TYPE
COLOUR
CONNECTIVITY
BATTERY PROTECTION
CPU
RAM / FLASH MEMORY
BUTTONS
INDICATION LEDS
DISPLAY
IP RATING
MOUNTING METHODS
OPERATION VOLTAGE
POWER CONSUMPTION
DURATION
Page 1 of 3
The GR-7610 i-OLEG is the control device of the Wireless
Emergency Lighting. The GR-7600 software is pre-installed in
the GR-7610 i-OLEG.
Features:
• Status indication LEDs (Power, Battery, Fault)
• 1x Ethernet connection (RJ45)
• 2x USB connection
• 1x HDMI connection
• WiFi Connection (802.11 b/g/n)
• System buzzer (alert on system fault)
• 1 hour of emergency duration
Button functions - BT1:
• Long press (>3s): Turn-on and turn-off the device.
Button function - BT2:
• Reset the system.
SPA 6V/1.3Ah (Lead acid)
over-charge / deep-discharge
quad-core 1.8GHz
2GB / 32GB
Power / Battery / Faults
Power ON / Reset
1x USB 2.0 port, 1x USB 3.0 port, 1x Ethernet port (RJ-45),
1x HDMI port, Wi-Fi 802.11 b/g/n
7” capacitive touch IPS display (1024x600)
Thank you for your trust in our products
Olympia Electronics - European manufacturer
POWER BATTERY FAULTS
BT1 BT2
EN 62479:2010, EN 62311:2008, EN 62368-1:2014 +AC:2015,
ETSI EN 301 489-1 V1.9.2, ETSI EN 301 489-17 V2.2.1,
EN 55032:2013 +AC:2013, EN 55024:2010, ETSI EN 300 328 V2.1.1
PRODUCED IN ACCORDANCE WITH

Page 2 of 3
1. Ethernet (RJ45) port
2. 2xUSB ports
3. HDMI output
Default settings:
• GR-7600 Software / Administrator menu password: 1000
Buzzer:
• Normal tone - fault notification (3Beeps/sec).
• Fast tone - pending battery is depleted / cut-off (5Beeps/s).
Schematic 1: Wall mounting bracket Schematic 2: Side connections
LED indications:
POWER (Green) : ON when the system is running and mains power is connected.
Blinking when the system is running and mains power or battery is disconnected
[1 time/s].
Double blinking when the system is offline and battery is charging [2 times/2s].
Triple blinking when the system is offline and mains power is connected
[3 times/2s].
OFF when the system is offline and mains power is disconnected.
BATTERY (Yellow): ON when the battery is connected.
Blinking when the battery is depleted [1 time/s].
OFF when the battery is disconnected / system offline.
FAULT (Red) : ON when there is a current fault on the system.
Blinking when there is a new event [1 time/s].
OFF when no new event or fault are present.
923761000_09_005
1.
2.
3.

Page 3 of 3
Battery replacement:
Deactivate the system, unscrew the battery cover, disconnect the battery and replace it. Fasten the
battery cover again and reactivate the system.
1. Wall installation: Mount the detachable bracket
on a vertical wall surface (drill according to the
mounting holes a, b, c). Use the spirit level to align
horizontally.
Put the device in the detachable bracket and tighten
the screw on the bottom to secure it in place (d).
Connect the mains power cable on the socket (e).
Installation:
Battery: SPA 6V-1.3Ah (Lead Acid)
2. Table installation: Screw the included metal
stand on the back of the detachable bracket.
Put the device in the detachable bracket and
tighten the screw on the bottom to secure it in place
(d).
Connect the mains power cable on the socket (e).
2.
Do not t hrow b atte r ies i n
common trash bins. Dispose of
p r o p e r l y o n l y i n b a t t e r y
recycling points. Do not heat or
incinerate! Do not short-circuit! Do not
squeeze or shock! Do not disassemble!
Replace with the same battery type
only.
WARRANTY
Olympia Electronics guarantees the quality, condition and operation of the goods. The period of warranty
is specified in the official catalogue of Olympia Electronics and also in the technical leaflet, which
accompanies each product. This warranty ceases to exist if the buyer does not follow the technical
instructions included in official documents given by Olympia Electronics or if the buyer modifies the goods
provided or has any repairs or re-setting done by a third party, unless Olympia Electronics has fully
agreed to them in writing. Products that have been damaged can be returned to the premises of our
company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge the
buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or not the
buyer the transportation cost.
HEAD OFFICE
72nd km. O.N.R. Thessaloniki-Katerini
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.gr
[email protected]
923761000_09_005
1.
c
b
a
d
e