Olympus HiQ+ Installation instructions

HiQ+ Laparoscopic Instruments
Disassembly Guide
STEP 1
Completely open the handle.
STEP 2
With the handle fully opened, press down on the red release button.
STEP 3
Pull apart the jaw insert and shaft component from the handle.
NOTE: A twisting motion may help facilitate the separation of the two components.

Olympus is a registered trademark of Olympus Corporation, Olympus America Inc., and/or their affiliates.
136 Turnpike Road, Southborough, MA 01772
©2018 Olympus America Inc. All rights reserved.
Printed in USA OAIENE0418QRG25816
STEP 4
Anchor the jaw insert with your left hand then rotate the shaft counter-clockwise
a half-turn to dislodge the jaw insert from the insulated shaft.
STEP 5
Remove the jaw insert from the insulated shaft.
NOTE: Push down on the red release button if disassembling bipolar instruments.
STEP 6
Remove the red sealing cap on the insulated shaft and the black sealing cap from
the handle. Prepare for cleaning and sterilization.