Olympus HiQ+ User manual

HiQ+ Components: The HiQ+ Monopolar Laparoscopic Hand Instruments consists of three modular components and 2 sealing caps.
STEP 1
Insert the jaw insert into the insulated shaft.
STEP 2
Anchor the jaw insert with your left hand then rotate the shaft clockwise
a half-turn to lock the jaw insert in place.
HiQ+ Laparoscopic Instruments
Assembly Guide
Jaw Insert
Handle
Insulated Shaft
STEP 3
Gently tap on the proximal end of the jaw insert to ensure that it is
anchored into place. If the jaw insert slides out of the shaft, repeat step 2.
STEP 4
Completely open the handle.

STEP 6
When properly inserted, close the handle to lock the system in place.
STEP 5
Fully insert the proximal end of the jaw insert into the handle. If the jaw
insert becomes dislodged from the shaft, disassemble all components
and restart the assembly process.
Olympus is a registered trademark of Olympus Corporation, Olympus America Inc., and/or their affiliates. I Medical devices listed may not be available for sale in all countries.
For more information, contact your Olympus
sales representative, or call 800-848-9024.
www.medical.olympusamerica.com
©2019 Olympus America Inc. All rights reserved.
Printed in USA OAIENE0219QRG31090
136 Turnpike Road, Southborough, MA 01772