Olympus EVIS X1 User manual

EVIS X1
Installation Guide
Ver. 4.0
Olympus Europa SE & Co. KG
1

Revision history
2
V
e
r. Date Page Content Revised Approved
1
.
02020.03.03 New
prepar
ation - New preparation A.Sekiya S.Tominaga
2
.
02020.06.24
5, 9,
11,12,
25,36,
70, 85
-Information updated.
nCare (ISM Product) A.Sekiya N.Ito
3
.
02021.01.25 108-
120 - Added OIP-1 cabling T. Dekker H. van Duellen
4
.
02021.10.27 110,
111 -
Page added,
information updated
with Endobase and CV-
1500
D. Kelmendi

3
Table of Contents
1. System Configuration
2. Package contents
3. Precautions for installation
4. Set up device on WM-NP3
5. Installation and setting
6. CV-1500 wiring/setup peripheral equipment (excluding US center)
7. CV-1500 wiring and setting (US center)
8. CV-1500 wiring and setting (CV-190/190PLUS/290 and peripheral
equipment)
9. CV-1500 wiring and setting ENDO-AID CADe
10. Appendix

4
1. System organization

5
1. System organization
This document explains the installation, wiring, setting, and precautions for
delivery and installation using the following system configuration.
Monitor
・OEV321UH
・OEV262H
・OEV261H
US Center
・EU-ME1
・EU-ME2
CV-1500
UPD-3
UCR
Video recorder
・IMH-200
・IMH-20
・IMH-10
・nCare *
Trolley
・WM-NP2
・WM-NP3
OFP-2
Printer
・OEP-4
・OEP-5
・OEP-6
Video system
center
・CV-190
・CV-190PLUS
・CV-290
PSCU
*Touch panel monitor is required to operate nCare.

6
2. Package contents

7
Product
symbol Name
MAJ-2428 12G-SDI cable 2.9M
MAJ-2427 Portable Memory 2
MAJ-901 Water container
MAJ-941 White cap set
MAJ-2431 Foot holder(4pcs, with a
pattern)
- Cable color sheet
- Instructions for use (OSS)
-Instructions for use
(installation)
-Instructions for use
(operation)
CV-1500 Package contents
■CV-1500
Name : EVIS X1 Video Systems Center
Brand symbol : OLYMPUS CV-1500
■Main body ■Accessories
2. Package contents

8
3. Precautions for installation

①Checking shelf height
9
Before installation, change the height of the shelf plate as needed.
Original shelf positions at delivery are as follows:
Installed on WM-NP2 Installed on WM-NP3
275mm
215mm
292mm
334mm
221mm
259mm
Maximum size [mm]
Product name
Width
Height
Depth
CV-1500
398
218
580
CV-190
CV-190PLUS
CV-290
382
91
489
EU-ME1
430
185
500
EU-ME2
445
184
495
IMH-10
370
108.5
413
IMH-20
370
167.5
413
IMH-200
370
150
390
Maximum size [mm]
Product name
Width
Height
Depth
nCare
371
87
340
OEP-4
280
125
398
OEP-5
280
125
398
OEP-6
280
125
415
OFP-2
244
220
385
UPD-3
370
81
482
PSCU
375
75
477
[Reference] Maximum dimension of each product
*If CV1500 and CV-190/190PLUS/290 are placed on WM-NP2, position of the shelf plate needs to be changed.
3. Precautions for installation

②Checking shelf size
10
Device which exceeds the size of the shelf plate cannot be mounted.
Top tray Top tray
WM-NP2 WM-NP3
3. Precautions for installation
<SupplementaryInfo>
When CV-1500 on the mid shelf is placed on the pattern, the collar of the connector
protrudes from the front end of the mid shelf. However, it is OK since it does not protrude
from the base shelf.
Mid shelf
Base shelf
Base shelf
Mid shelf

3. Precautions for installation
③Check of shelf maximum load
11
Place the devices so that the total load should not exceed the limit
WM-NP2 WM-NP3
maximum
load
[kg]
Top shelf
20
20
mid shelf
plate
30.5
31
Base
shelf
35
35
Product name
Weight [kg]
CV-1500
19.4
CV-190
CV
-190PLUS
CV-290
10.7
EU-ME1
23
EU-ME2
22.5
Product
name Weight [kg]
OEP-4
9
OEP-5
9
OEP-6
9.1
IMH-10
8.6
IMH-20
10.7
IMH-200
8.2
nCare
4.2
OFP-2
4 (when water container
is empty)
UPD-3
9
PSCU
6.1
[Reference] Weight of each product

3. Precautions for installation
④Check of Rated Power (Power Consumption)
12
WM-NP2 WM-NP3
Maximum power
comsumption[VA]
1250
1300
When the device is powered from a isolation transformer, wire
so that the total power does not exceed the maximal power of
the isolation transformer.
Product name
Rated power
[VA]
OEV321UH
182
OEV262H
112
OEV261H
160
CV-1500
600
CV-190
CV-190PLUS
CV-290
150
Product
name
Rated power
[VA]
OEP-4
280
OEP-5
280
OEP-6
280
IMH-10
130
IMH-20
190
IMH-200
125
nCare
180
EU-ME1
300
EU-ME2
370
OFP-2
100
UPD-3
110
PSCU
70
[Reference] Rated power for each product

3. Precautions for installation
⑤Precautions for SDI cable wiring
13
SDI terminals are structurally difficult to apply large-volume electroprotective
devices, and are generally sensitive against electrostatic effects.
Following information is example in case of Japan
Please note the following points when connecting the SDI cable:
◼Do not use a 3-core to 2-core conversion plug on the device's power code.
Connecting to a 3-core medical outlet directly or via an isolation transformer
of the workstation.
◼In order to reduce the electrostatics charge, perform wiring operations for
while connecting all power codes of the devices to outlets. In case that the
medical outlest is not available, perform wiring with connecting a power
codes to the isolation transformer of the Workstation. Because the device
disperses charged electrostatics, it will reduce electrostatics effect.
◼To reduce Electrostatic charge, perform wiring after touching metallic objects,
such as a steel cabinet.

3. Precautions for installation
14
◼Take care so that clothing and human body do not touch the core of the SDI
input/outputterminals during installation
◼Ensure that the device to be connected is switched off, then connect the SDI
cable. If connecting with the power on, the product or peripheral equipment
may damaged.
When touchingthe SDI input/outputterminal
directly When touchingthe core of the other end of the connected SDI cable

15
4. Set up device on WM-NP3

Set up device on WM-NP3
! Caution!
Do not place devices that exceed the size of the shelf plate.
Do not exceed the total load per shelf plate for each shelf plate.
(see 3. Precautions for installation)
16
[Monitor arm]
Place the monitor.
[Top shelf]
Install the video processor.
※When combining CV-1500 and CV-190
/190PLUS /290, place CV-
190/190PLUS/290 underCV-1500.
[Keyboard tray].
Place the keyboard.
[Mid shelf]
Place peripheralequipment.
(mainly US Center)
[Base shelf]
Place peripheralequipment.

17
5. Installation and setting

18
Table of Contents
◆Installation and setting
•Rear of CV-1500 ~ video terminal ~
•Rear of CV-1500 ~ Remote terminal ~
•Rear of OEV321UH ~ video terminal ~
•OEP-6 Rear Video/Remote Terminals
•Tips for installation and setting up
•Setting for recording images
•External image record setting

Rear of CV-1500 ~ video terminal ~
19
[Image output terminal]
1 : 12G-SDI output (4K/HD) terminals.
2 : 3G-SDI output (HD) terminals.
3 : Composite output terminal
[Video input terminal]
1 : Y/C input terminal
2 : CV inputs (Y/C) are used to connect to CV-190/190PLUS/290.
3 : HD/SD input (SDIs) terminals.
4 : CV inputs (SDIs) are used to connect to CV-190/190PLUS/290.
1 2
3
1 2 3 4
Output terminal Initial value Selected Items
12G
-SDI output (4K/HD) signals HD:1080p 4K HD:1080p HD:1080i SD
3G
-SDI output (HD) signals HD:1080p HD:1080p HD:1080i SD

Rear of CV-1500 ~ Remote terminal ~
20
[Devices that can be connected].
・・・ Observation monitor and insufflation system
for endoscopes
・・・ US center and flushing pumps for
endoscopy
・・・ Color video printers, etc.
・・・ Keyboard, etc.
・・・ CV interface converter
・・・ External video system center
12
4 5
3
6
The main remote terminals used for wiring are as follows:
[Remote Terminals]
1: MONITOR/UCR terminals.
2: EUS/OFP terminals.
3 : Printer output terminals
4 : Keyboard Terminals
5 : Adapter Terminals
6 : CV-LINK terminals.