Omcan RS-CN-0468 User manual

Revised - 03/01/2022
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Refrigerated Showcase
Model RS-CN-0468
Item 47277
Instruction Manual

2
Page
-------------------------------------------------------------------------------------------- 3
--------------------------------------------------------------------------- 4 - 5
--------------------------------------------------------------------------- 5 - 7
-------------------------------------------------------------------------- 8
--------------------------------------------------------------------------------------- 8 - 10
--------------------------------------------------------------------------------------- 10
----------------------------------------------------------------------------- 11 - 12
---------------------------------------------------------------------------- 13 - 15
---------------------------------------------------------------------------- 16
------------------------------------------------------------------------------------------- 17 - 18
---------------------------------------------------------------------------- 19
Table of Contents
Section
Disclaimer
General Information
Safety and Warranty
Technical Specications
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model RS-CN-0468

3
Disclaimer
OMCAN IS NOT RESPONSIBLE FOR
DIMINISHED COOLING OR ANY DAMAGES
DUE TO WATER LEAKS. WARRANTY IS VOID
IF THE AMBIENT ROOM TEMPERATURE
EXCEEDS 75°F AND 55% RELATIVE
HUMIDITY, AND THE APPLIANCE DRAIN IS
NOT CONNECTED DIRECTLY TO A FLOOR
DRAIN.

4
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

5
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Safety and Warranty
Handle with care
Unplug the wall socket rst. Never tilt it over 45
degrees when handling.
Dry place
Always place the refrigerator in a dry location.

6
Safety and Warranty
Su󰀩cient space
The distance from both sides and back of refrigerator
to wall or other substance must be no less than 10
cm (4”). The refrigeration capability may decrease if
its surrounding space is too small to circulate air.
Well ventilated
Always place the refrigerator in an area with proper
ventilation. When using for the rst time, wait at least
24 hours after handling to start.
Far from heat source
Never place the refrigerator in direct sunlight. Never
place refrigerator near heat source as it reduces
refrigeration capabilities.
Heavy load
Never put any heavy objects on top of the
refrigerator.
Do not make holes
Never make any holes on the refrigerator. Do not
attach any objects onto the refrigerator.
Stable Location
Unpack and place the refrigerator on level and stable
ground.
Exclusive power socket
Normally, the power supply should be 100 – 120V,
60 Hz single phase AC with exclusive single phase
receptacle.
Do not share the socket
Never let the refrigerator share a socket with another
appliance. The cable may become hot and this may
cause a re.
DO NOT USE EXTENSION CORDS.
Protect cables
Never break or damage the cables as this may cause
current leakage resulting in a re.
No water ushing
Never spray down refrigerator with pressurized water
supply.
Avoid ammable and explosive objects
Never put any ammable or explosive items inside
the refrigerator such as gasoline or alcohol. Never
put any dangerous products in close proximity to the
refrigerator.
No spray
Do not spray the unit with a ammable substance
such as paint. This may result in a re.
After power break
After a power break or unplugging the refrigerator,
always wait at least 5 minutes before starting the
refrigerator again.
Medical Storage
No medicine is allowed to be kept inside the
refrigerator.
SUITABLE FOR HIGH TRAFFIC AREAS WHERE NOISE LEVELS ARE NOT A CONCERN.
NOTE
• The electric circuit diagram and parameters on the product name plate are subject to change without the
manufacturer having to change the manual.
• The design might be improved without notice.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or a qualied
electrician in order to avoid injury.
WARNING: The unit uses R290 refrigerant. Make sure that all precautions against re
have been taken.

7
Safety and Warranty
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without di󰀩culty.
In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

8
Technical Specications
Operation
Model RS-CN-0468
Capacity 468 L / 16.53 cu.ft
Temperature Range 2 - 10°C / 35.6 - 50°F
Max Ambient Temp
Rating 32°C / 90°F
Refrigeration Power 1298 W
Defrost Power 36.8 W
Electrical 110V / 60Hz / 1
Current 10.7A
Refrigerant R290
Top Shelf Capacity 44.1 lbs. / 20 kgs.
Bottom Shelf Capacity 44.1 lbs. / 20 kgs.
Weight 522.5 lbs. / 237 kgs.
Packaging Weight 650.4 lbs. / 295 kgs.
Dimensions 47.2” x 34.1” x 59.1” / 1200 x 865 x 1500mm
Packaging Dimensions 50.8” x 38.4” x 65” / 1290 x 975 x 1650mm
Item Number 47277
BEFORE USE
Ensure the unit is upright and positioned in its location for 12 hours prior to use.
Plug the refrigerator in a 110V~ socket exclusively for the unit. After the refrigerator is running, test the air
suction to conrm it is su󰀩ciently cold. Then you may put food inside the unit. Make sure the food product is
already cooled before placing it in the display case. The unit should not be used to cool food products.
DIGITAL TEMPERATURE CONTROLLER
The digital temperature controller is easy to operate and controls the compressor.
• The main functions are: Temperature display, temperature control, manual control, automatic defrost, light
control, value storing, self-testing and parameter locking.
Digital Controller Operation:
1. Set Temperature:
Press SET and the set temperature is displayed.
Press or button to modify and store the displayed value.

9
Operation
Press SET to exit the adjustment and display the cold-room temperature.
2. If no buttons are pressed within 10 seconds, the cold-room temperature will be displayed.
3. Illumination:
Press the light button, it lights. Press the light button again, the light turns o󰀨.
4. Manual start/stop defrost:
Press the light button and hold for 6 seconds to defrost or stop defrost.
5. Refrigerant LED:
During refrigeration, the LED is on. When the cold-room temperature is consistent, the LED is o󰀨. During
the delay start, the LED ashes.
6. Defrost LED:
During defrosting, the LED is on. When it stops defrosting, the LED is o󰀨. During the delay display of
defrost, the LED ashes.
7. Digital Controller Reset:
When the display shows “disorder”, press button for 2 seconds until buzzer rings, quickly press button
for 6 seconds until the buzzer rings again. The display will ash for 3 seconds and it will be restored to the
factory setting.
SWITCHING OPERATION
1. ON/OFF switch, Press it to “I”, the machine start working, Press it to “O”, the machine stop working.
2. LED light ON/OFF, press it to”I”, LED is on, press it to “O”, LED is o󰀨.
3. Heating and Cooling Conversion Switch. Press “COOL”, air vent open, the top box is converted to
cooling. The upper and lower glass heating switch are invalid. Press “HOT”, air vent closed, the top box is
converted to heating, The upper and lower glass heating switch are valid.
4. Upper and lower glass heating switch. Press it to “I” heating is working, Indicator light is on. Press it to “O”
heating stop working, indicator light is o󰀨.
CAUTION
• Reducing the frequency of opening the refrigerator door will keep more cold air inside the refrigerator.
• Do not block air suction or outlet. Air must continue circulating to increase refrigeration capability.
• Do not over ll or over stock the refrigerator, as it will inuence the cooling e󰀨ect. Adjust the rack height for
proper food storage.

10
Maintenance
Keep the refrigerator clean and perform periodical maintenance as necessary. Always unplug the socket before
maintenance. Never use a damaged plug or loose socket in order to prevent from electric shock or short
circuit. Never ush the refrigerator. Never use alkali detergent, soap, gasoline, acetone or brush.
1. Clean outside:
Dip soft cloth in neutral detergent (tableware detergent) to clean the outside of the refrigerator and then
wipe it with dry soft cloth.
2. Clean inside:
Take rack out for cleaning with water. Use soft cloth to wipe the box.
3. Shut down refrigerator for a long time:
Take all food out and unplug the wall socket. Clean both inside and outside of the refrigerator thoroughly
and open the door for su󰀩cient dry. The glass breaks easily. Keep the glass far from children.
4. Replacement of lamp in the light box:
If the LED lamp is damaged, it must be replaced by the manufacturer, or its service agent.
Operation
• Cool hot food down to room temperature before storing it in the refrigerator.
• Try to reduce open times and keep refrigerator cold and closed, if power is ever o󰀨. Only allow a skilled
service individual with proper tools to repair damaged power cables. Never touch compressor, as it can
result in injury.
• If supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualied
persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
WARNING: Do not use mechanical devices of other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
CAUTION: Risk of re. The height of the triangle in the symbol should be at least 15mm.

11
Troubleshooting
ERROR CODES
Fault Code Causes Solutions
EE1 Open circuit or short
circuit of temperature
probe.
Check if the plug on mainboard is loosened or not, or
change temperature probe.
EE2 Open circuit or short
circuit of defrosting probe.
Check if the plug on mainboard is loosened or not, or
change defrosting probe.
EE3 Open circuit or short
circuit of overheating
probe.
Check if the plug on mainboard is loosened or not, or
change overheating probe.
EE4 Overheating probe starts
protecting program (58°C
/ 136.4°F)
Too much dust on condenser, clean the condenser.
Condenser motor stops working, repair or change the
motor.
The unit is too close to the wall, keep product at least
50cm from the wall.
Ambient temperature is too high, ensure the ambient
temperature stays between the specied range.
GENERAL TROUBLESHOOTING
Problem Causes Solutions
Strange noise under the bottom
shelf.
Fan blade broken. Power o󰀨 and x the blade.
Not refrigerating in spite of normal
operation.
Unit is o󰀨. Power on.
Melting process. Stop the melting process.
Refrigerant leaking. Patch the leak and rell refrigerant.
Unit failure. Call Omcan.
Weak air from air curtain, and
higher cabinet temperature.
Evaporator blocked by frost. Increase melting frequency.
Inside fan damaged. Replace the fan.
Too low set point of temperature
controller.
Adjust the set point.
Vent blocked by storage. Remove the storage.
Normal air curtain, but higher
cabinet temperature.
Insu󰀩cient refrigerant. Rell the refrigerant.
Too high set point of temperature
controllers.
Adjust the set point for the
temperature controller.
The wind curtain disturbed by
strong air ow.
Removing the disturbing factors.
Ambient temperature or humidity
beyond standards.
Improve the conditions.

12
Troubleshooting
Melting water overown. Heating pipe for melting water
damaged.
Replace the heating pipe.
Water level controller failure. Replace the water level controller.
Ambient temperature or humidity
beyond standards.
Improve the conditions.
Normal air curtain, but periodical
uctuation of cabinet temperature.
Condenser contaminated. Clean the condenser.
Poor venting of the unit. Improve the venting conditions.
Heat protection of compressor
failure.
Replace the heat protection.
Capillary is blocked by ice. Replace the drying lter.
Temperature controller failure. Replace the temperature controller.
The following situations are not problems:
1. The murmur of water is heard when the refrigerator is working. This is normal as the coolant is circulating in
the system.
2. During wet season, condensation may be found on the outside of the refrigerator. This is not a problem,
this is caused by high humidity. Simply use a cloth to wipe it.

13
Model RS-CN-0468 47277
Parts Breakdown

14
Model RS-CN-0468 47277
Parts Breakdown

15
Item No. Description Position Item No. Description Position Item No. Description Position
AI267 Condenser Air Guide Cover Left for
47277 1 AI114 Middle Partition Left for 47277 34 AI111 Middle Glass Strip for 47277 69
AI268 Condenser for 47277 2 AI289 Tray Assembly Left for 47277 35 AI085 Right Fixing Support Assembly for 47277 70
68396 Motor for 47277 3 AI290 Isolation Block Assembly for 47277 36 AI084 Strip of Top Side Glass for 47277 71
AI054 Caster for 47277 4 AI291 Isolation Board Left for 47277 37 AI064 Left Frame Assembly for 47277 72
AI269 Bottom Frame (Welded Assembly) for
47277 5 AI292 Air Guide Cover Assembly for 47277 38 AI117 Middle Pole of Shelf Back for 47277 73
AI270 Welding Assembly of High Pressure Tube
for 47277 6 AI293 Shelf Glass - Heating Film for 47277 39 AI116 Middle Pole of Shelf Front for 47277 74
AI051 Fixing Support of High Pressure Tube
for 47277 7 AI077 Connection Panel of Right Shelf for 47277 40 AI065 Left Side Glass for 47277 75
AI271 Pressure Board of High Pressure Tube
for 47277 8 AI294 Left and Right Front Board of Shelf for 47277 41 AI074 Right Pole for Shelf for 47277 76
AI272 Back Net for 47277 9 AI092 Block Big for 47277 42 AI073 Door Frame Right Assembly for 47277 77
AI273 Base Foam of Evaporator for 47277 10 AI295 Block Small for 47277 43 AI121 Wiring Box Cover for 47277 78
AI059 Right Board of Evaporator Motor Cover
for 47277 11 AI296 Flat Glass for 47277 44 AI122 Wiring Box for 47277 79
AI058 Left Board of Evaporator Motor Cover
for 47277 12 AI297 Wind Screen for Air In for 47277 45 60594 Cover of Circuit Board Box for 47277 80
AI274 Evaporator Right Block for 47277 13 AI298 Cross Shield Board for Air In for 47277 46 61167 Circuit Board Box for 47277 81
AI275 Evaporator Left Block for 47277 14 AI299 Bottom Ventilation Shield Board for 47277 47 AI123 Main Board for 47277 82
AI276 Evaporator for 47277 15 AI300 Fixing Panel of Front Glass Deector
for 47277 48 67652 LED Transformer for 47277 83
AI277 Back Foam for 47277 16 AI301 Front Wind Screen for 47277 49 61224 Dry Filter for 47277 84
AI278 Ventilation Board for 47277 17 AI099 Reinforcement Board for Air In for 47277 50 60669 Pipe Clamp for 47277 85
AI115 Left Door Frame Assembly for 47277 18 AI302 Fixing Board for Shelf LED for 47277 52 AI124 Compressor for 47277 86
AI279 Top Glass Strip for 47277 21 AI113 Left Shelf Connection Panel for 47277 53 61246 Wire Clip Holder for 47277 87
AI280 Door Frame Top for 47277 22 AI303 Left Panel of Shelf for 47277 54 66095 Wire Clip Cover for 47277 88
AI281 Top Ceiling Board for 47277 23 AI112 Switch Panel for 47277 55 AI307 High Pressure Evaporator Tube for
47277 89
AI282 Curved Glass for 47277 24 AI105 Electrical Pushing Lever for 47277 56 AI126 Connection Pipe for 47277 90
AI120 Right Side Glass for 47277 25 AI101 Fixing Seat for 47277 57 AI308 Connection Pipe for 47277 91
AI119 Right Side Interior Panel for 47277 26 AI102 Seat Pad for 47277 58 68353 Temperature Sensor for 47277 92
AI283 Right Frame Assembly for 47277 27 AI107 Fixing Panel for Air In for 47277 61 67674 Compressor Protect Probe for 47277 93
AI284 Front Top Frame for 47277 28 AI304 Pulley Rail Pin for 47277 62 60668 Drain Pipe for 47277 94
AI285 Front Bottom Frame for 47277 29 AI106 Positioning Block for Pulley Rail for 47277 63 67648 Temperature Display for 47277 95
AI286 Front Glass Strip for 47277 30 AI305 Left Fixing Support Assembly for 47277 65 60119 Switch for 47277 96
AI287 Front Fixing Support Assembly for 47277 31 AI306 Evaporator Motor Cover for 47277 66 60590 PVC Trucking for 47277 97
AI288 Front Shield Board of Top Shelf for 47277 32 AI109 Middle Fixing Support Bottom for 47277 67
66104 Curtain for 47277 33 AI110 Middle Fixing Support for 47277 68
Model RS-CN-0468 47277
Parts Breakdown

16
Model RS-CN-0468 47277
Electrical Schematics

17
Notes

18
Notes

19
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour di󰀨usion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 6,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 6,500 productos con origen a nivel mundial.