Omcan DI-IT-0010-S User manual

Revised - 04/05/2017
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Slush Machines
Models DI-IT-0010-S, 0020-S, 0030-S
Items 39677, 39678, 39679
Instruction Manual

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 5
---------------------------------------------------------------------- 5 - 6
-------------------------------------------------------------------------------------------- 6
----------------------------------------------------------------------------------------- 6 - 7
----------------------------------------------------------------------------------------- 8
------------------------------------------------------------------------------------ 9
---------------------------------------------------------------------------- 10 - 13
---------------------------------------------------------------------------- 14
---------------------------------------------------------------------------- 15
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Figure Drawings
Parts Breakdown
Electrical Schematics
Warranty Registration
Model DI-IT-0010-S / Model DI-IT-0020-S / Model DI-IT-0030-S

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
Safety and Warranty
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
USEFUL INFORMATION
• Do not pour hot mixture into the containers.
• To increase slurry production, top up with fresh mixture as opposed to leaving the evaporator uncovered
during operation.
• During operation, it is normal that the machine emits heat. Should this heat appear excessive, check that
the condenser is not obstructed by dust (see relative condenser cleaning section), or that the machine is

5
Safety and Warranty
Technical Specications
not positioned close to a heat source (see installation section).
• Ensure that the product sugar content is within the 15% – 25% limit when preparing the mixture. Lower
levels will inhibit slurry production due to the reduction motor protection system, while higher levels will
result in delays due to the higher sugar content corresponding to a lower freezing point.
• To ensure that avours remain unaltered, clean all components that are in direct contact with the product at
least every two days.
• Should the type of product be changed, empty the container(s) and pour in hot water and leave to stand.
Wait 15 minutes before emptying. Do not use the refrigeration cycle during this period.
PRINCIPAL RULES
• Do not touch the machine with wet hands.
• Do not use the equipment barefoot.
• Do not permit incapable persons or children to operate the machine.
• Do not leave the equipment outdoors or otherwise exposed to the elements.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Model DI-IT-0010-S DI-IT-0020-S DI-IT-0030-S
Capacity 10 L / 10.6 QT 2 x 10 L / 2 x 10.6 QT 3 x 10 L / 3 x 10.6 QT
Max. Temperature -6°C / 21.2°F

6
Installation
Operation
INSTRUCTIONS AND WARNINGS
Remove the machine from the packing, and check for any visible signs of damage that may have occurred
during shipping. Remove the protective coverings (plastic bags, etc.) and ensure that they are stored out of
the reach of children. The equipment must never be lifted by the glass or plastic components when being
moved; the company shall not be held responsible for damage caused by improper handling. Check that the
power supply is adequately grounded as required by law, and corresponds to the power specications printed
on the equipment placard situated on the front panel or printed in the manual. Do not use multiple adapters:
the equipment must be connected to a single outlet. If in doubt, have the machine installed by a qualied
technician. The company declines any responsibility for accidents due to an incorrect installation resulting in
damage to persons or property. Before operating the equipment, clean as per the instructions in the Cleaning
and Maintenance section. Install the equipment away from heat sources and leave sufcient space around the
machine to ensure adequate cooling by air circulation.
CAUTION: If the containers remain full overnight, blocks of ice may form. Before switching the
machine on, clear any ice from inside the containers to avoid damage to the paddles.
Before lling the containers, carefully clean and rinse all surfaces that will be exposed to the drinks. Fill the
containers up to the maximum level and replace the illuminated covers.
CAUTION The equipment is not designed for sugar-free liquids. If natural products are used, the sugar
content must be between 15% and 25%. If commercial mixes are used for slurries, sorbets, yoghurt or
Technical Specications
Electrical 115V / 60 Hz
Refrigerant R404
Current 8A 10A 11.3A
Dimensions 7.1” x 24.4” x 32.3”
180 x 620 x 820mm
14.2” x 24.4” x 32.3”
360 x 620 x 820mm
20.5” x 24.4” x 32.3”
520 x 620 x 820mm
Packaging Dimensions 11” x 24” x 33”
279 x 610 x 838mm
15.7” x 24.4” x 34.3”
400 x 620 x 870mm
23.6” x 24.4” x 34.3”
600 x 620 x 870mm
Weight 66.1 lbs. / 30 kgs. 110.2 lbs. / 50 kgs. 148.8 lbs. / 67.5 kgs.
Packaging Weight 75 lbs. / 34 kgs. 121.3 lbs. / 55 kgs. 160.9 lbs. / 73 kgs.
Item Number 39677 39678 39679

7
Operation
milk-based drinks, follow the manufacturer’s instructions.
• Move Power Switch (8) to ON.
• Press the reduction motor button (6).
• Press the Bibita (Drinks) button (4) for cold drinks, or the Granita (Slurry) button (5) for slurries.
• Drink temperature or Slurry density may be raised or lowered by using buttons (1) or (2) accordingly. The
density reference or the temperature in degrees C may be read from the display.
• Cover lights are operated by button (7).
EQUIPMENT FUNCTIONS
KEYPAD LEGEND
1. Decrease slurry density.
Decrease drink temperature.
2. Increase slurry density.
Increase drink temperature.
3. Display:
Slurry function: 1- 3 - 5 - 7 - 9 indicates slurry density, indicates valve open.
Drinks function: 4°C - 9°C drink temperature,
H° drink temperature higher than 9°C, L° drink
temperature lower than 4°C
4. Cold drink function.
5. Slurry function.
6. Reduction motor (press ON/OFF).
7. Cover lights (press ON/OFF).
The machine memorizes the last selected settings
when switched off for any length of time. Raising
a cover will cause the relative container paddle to
stop and the display will go out to indicate a stopped
condition. The cover lights may be switched on or off
as required by using the appropriate button. If sugar
content is insufcient, or foreign bodies or blocks
of ice are detected in a container, a sensor will halt
paddle rotation so as not to overload the reduction
motor. The display will show an error symbol ( ).
Once the cause of the stoppage has been rectied,
replace the cover, press reduction motor button (6),
and either the drinks (4) or slurry (5) button, and the
machine will restart.

8
Maintenance
CLEANING AND MAINTENANCE
CAUTION: Before attempting any cleaning or maintenance, ensure that the power switch is OFF, and
that the plug is removed from the mains. Never remove the plug by pulling the power cable (Fig. A).
It is imperative that machine components having direct contact with the products are cleaned thoroughly. Carry
out cleaning as per the illustration.
• Remove the illuminated cover.
• Empty the containers.
• Fill containers to remove product residue and rinse out.
• After extracting the base-container pin (Fig. C), Remove containers as shown in Fig. B.
• Remove paddle, internal shaft, and the lower sprocket (Fig. D), and then remove the container gasket (Fig.
E).
• Disassemble the tap (Fig. F) by pulling the two pins from the lever (Fig. G) and turning the locking ring anti-
clockwise (Fig. H).
• Unscrew the threaded knob and extract the upper sprocket (Fig. I – L).
• Extract the main gear rack by pulling upwards (Fig. M).
• Wash all components using a suitable detergent and rinse. Do not use abrasive cleaning products.
• Assemble all the previously removed components in reverse order as per the illustrations, and check for
correct operation.
Illuminated covers must be in position before the machine will operate. The containers may now be
relled.
CLEANING THE CONDENSER (RADIATOR)
All equipment of this type tends to ingest airborne dust when operating. This dust accumulates on the
condenser inlet surfaces, and should be removed with a soft, dry brush (Fig. N). A condenser clogged by
dust will compromise efcient refrigeration system operation, increase power consumption, and may be the
precursor of serious damage.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
39677 DI-IT-0010-S Slush Machine Grani 10 L / 1 Bowl 115/60 GR1
39678 DI-IT-0020-S Slush Machine Grani 10 L / 2 Bowl 115/60 GR2
39679 DI-IT-0030-S Slush Machine Grani 10 L / 3 Bowl 115/60 GR3

9
Figure Drawings

10
Parts Breakdown
Model DI-IT-0010-S 39677
Model DI-IT-0020-S 39678
Model DI-IT-0030-S 39679

11
Model DI-IT-0010-S 39677
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
70748 Lid for GR1, 2, 3 1 70766 Evaporator for GR1, 2, 3 22 70781 Upper Sprocket for GR1, 2, 3 43
70749 Front Glass for GR1, 2, 3 2 70767 Base for GR1, 2, 3 23 70782 Threaded Knob for GR1, 2, 3 44
70750 Rear Glass for GR1, 2, 3 3 70768 Gasket Front Evaporator for GR1, 2, 3 24 70783 Lower Sprocket for GR1, 2, 3 45
70751 Inner Cover for GR1, 2, 3 4 70769 Gasket Rear Evaporator for GR1, 2, 3 25 42901 Propeller Shaft for GR1, 2, 3 46
70752 Light-Bulb Holder for GR1, 2, 3 5 70770 Reduction Motor for GR1, 2, 3 26 42902 Spiral for GR1, 2, 3 47
70753 Light-Bulb for GR1, 2, 3 6 70771 Bakelite Gear for GR1, 2, 3 27 42903 Tank Basket for GR1, 2, 3 48
70754 Lid Electrical Contacts for GR1, 2, 3 7 70772 Sinterizate Gear for GR1, 2, 3 28 70784 Shoulder Electrical Contacts for GR1,
2, 3 49
42897 Container for GR1, 2, 3 8 70773 Base Plug for GR1, 2, 3 29 70785 Electrical Contact Cover for GR1, 2, 3 50
70755 Tap Piston for GR1, 2, 3 9 70774 Metal Hook Tank Safety Pin for GR1, 2, 3 30 70786 Shoulder Cover for GR1, 2, 3 51
42898 Basket with Lip for GR1, 2, 3 10 70775 Evaporator Swab for GR1, 2, 3 31 70787 Tank Safety Pin for GR1, 2, 3 52
42899 Or Tap for GR1, 2, 3 11 70776 Gear Slide Pin for GR1, 2, 3 32 70800 Fan for GR1 53
70756 Piston Spring for GR1, 2, 3 12 70777 Cable Lock for GR1, 2, 3 33 70788 Electrical Circuit Board for GR1, 2, 3 54
70757 Tap Plug for GR1, 2, 3 13 42900 Reduction Motor Sensor for GR1, 2, 3 34 70789 Circuit Board Cover for GR1, 2, 3 55
70758 Lever Tap for GR1, 2, 3 14 70778 Electrical Cable for GR1, 2, 3 35 70790 Controls for GR1, 2, 3 56
70759 Lever Safety Pin (Lower) for GR1, 2, 3 15 70795 Condenser for GR1 36 70791 Drip Tray for GR1, 2, 3 57
70760 Lever Safety Pin (Upper) for GR1, 2, 3 16 70796 P.M. Electric Valve for GR1 37 70792 Drip-Tray Grille in Plastic for GR1, 2, 3 58
70761 Shoulder for GR1, 2, 3 17 70797 Valve Coil for GR1 38 70801 Front Panel for GR1 59
70762 Thermostat for GR1, 2, 3 18 70798 Transformer for GR1 39 70793 Power Switch for GR1, 2, 3 60
70763 Return for GR1, 2, 3 19 70799 Compressor for GR1 40 70802 Rear Panel for GR1 61
70764 Gear Slide for GR1, 2, 3 20 70779 Charge Valve for GR1, 2, 3 41 70794 Side Panel for GR1, 2, 3 62
70765 Main Gears for GR1, 2, 3 21 70780 Feet for GR1, 2, 3 42 61396 Fuse for GR1, 2, 3

12
Model DI-IT-0020-S 39678
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
70748 Lid for GR1, 2, 3 1 70766 Evaporator for GR1, 2, 3 22 70781 Upper Sprocket for GR1, 2, 3 43
70749 Front Glass for GR1, 2, 3 2 70767 Base for GR1, 2, 3 23 70782 Threaded Knob for GR1, 2, 3 44
70750 Rear Glass for GR1, 2, 3 3 70768 Gasket Front Evaporator for GR1, 2, 3 24 70783 Lower Sprocket for GR1, 2, 3 45
70751 Inner Cover for GR1, 2, 3 4 70769 Gasket Rear Evaporator for GR1, 2, 3 25 42901 Propeller Shaft for GR1, 2, 3 46
70752 Light-Bulb Holder for GR1, 2, 3 5 70770 Reduction Motor for GR1, 2, 3 26 42902 Spiral for GR1, 2, 3 47
70753 Light-Bulb for GR1, 2, 3 6 70771 Bakelite Gear for GR1, 2, 3 27 42903 Tank Basket for GR1, 2, 3 48
70754 Lid Electrical Contacts for GR1, 2, 3 7 70772 Sinterizate Gear for GR1, 2, 3 28 70784 Shoulder Electrical Contacts for GR1,
2, 3 49
42897 Container for GR1, 2, 3 8 70773 Base Plug for GR1, 2, 3 29 70785 Electrical Contact Cover for GR1, 2, 3 50
70755 Tap Piston for GR1, 2, 3 9 70774 Metal Hook Tank Safety Pin for GR1, 2, 3 30 70786 Shoulder Cover for GR1, 2, 3 51
42898 Basket with Lip for GR1, 2, 3 10 70775 Evaporator Swab for GR1, 2, 3 31 70787 Tank Safety Pin for GR1, 2, 3 52
42899 Or Tap for GR1, 2, 3 11 70776 Gear Slide Pin for GR1, 2, 3 32 70808 Fan for GR2 53
70756 Piston Spring for GR1, 2, 3 12 70777 Cable Lock for GR1, 2, 3 33 70788 Electrical Circuit Board for GR1, 2, 3 54
70757 Tap Plug for GR1, 2, 3 13 42900 Reduction Motor Sensor for GR1, 2, 3 34 70789 Circuit Board Cover for GR1, 2, 3 55
70758 Lever Tap for GR1, 2, 3 14 70778 Electrical Cable for GR1, 2, 3 35 70790 Controls for GR1, 2, 3 56
70759 Lever Safety Pin (Lower) for GR1, 2, 3 15 70803 Condenser for GR2 36 70791 Drip Tray for GR1, 2, 3 57
70760 Lever Safety Pin (Upper) for GR1, 2, 3 16 70804 P.M. Electric Valve for GR2 37 70792 Drip-Tray Grille in Plastic for GR1, 2, 3 58
70761 Shoulder for GR1, 2, 3 17 70805 Valve Coil for GR2 38 70809 Front Panel for GR2 59
70762 Thermostat for GR1, 2, 3 18 70806 Transformer for GR2 39 70793 Power Switch for GR1, 2, 3 60
70763 Return for GR1, 2, 3 19 70807 Compressor for GR2 40 70810 Rear Panel for GR2 61
70764 Gear Slide for GR1, 2, 3 20 70779 Charge Valve for GR1, 2, 3 41 70794 Side Panel for GR1, 2, 3 62
70765 Main Gears for GR1, 2, 3 21 70780 Feet for GR1, 2, 3 42 61396 Fuse for GR1, 2, 3

13
Parts Breakdown
Model DI-IT-0030-S 39679
Item No. Description Position Item No. Description Position Item No. Description Position
70748 Lid for GR1, 2, 3 1 70766 Evaporator for GR1, 2, 3 22 70781 Upper Sprocket for GR1, 2, 3 43
70749 Front Glass for GR1, 2, 3 2 70767 Base for GR1, 2, 3 23 70782 Threaded Knob for GR1, 2, 3 44
70750 Rear Glass for GR1, 2, 3 3 70768 Gasket Front Evaporator for GR1, 2, 3 24 70783 Lower Sprocket for GR1, 2, 3 45
70751 Inner Cover for GR1, 2, 3 4 70769 Gasket Rear Evaporator for GR1, 2, 3 25 42901 Propeller Shaft for GR1, 2, 3 46
70752 Light-Bulb Holder for GR1, 2, 3 5 70770 Reduction Motor for GR1, 2, 3 26 42902 Spiral for GR1, 2, 3 47
70753 Light-Bulb for GR1, 2, 3 6 70771 Bakelite Gear for GR1, 2, 3 27 42903 Tank Basket for GR1, 2, 3 48
70754 Lid Electrical Contacts for GR1, 2, 3 7 70772 Sinterizate Gear for GR1, 2, 3 28 70784 Shoulder Electrical Contacts for GR1,
2, 3 49
42897 Container for GR1, 2, 3 8 70773 Base Plug for GR1, 2, 3 29 70785 Electrical Contact Cover for GR1, 2, 3 50
70755 Tap Piston for GR1, 2, 3 9 70774 Metal Hook Tank Safety Pin for GR1, 2, 3 30 70786 Shoulder Cover for GR1, 2, 3 51
42898 Basket with Lip for GR1, 2, 3 10 70775 Evaporator Swab for GR1, 2, 3 31 70787 Tank Safety Pin for GR1, 2, 3 52
42899 Or Tap for GR1, 2, 3 11 70776 Gear Slide Pin for GR1, 2, 3 32 70816 Fan for GR3 53
70756 Piston Spring for GR1, 2, 3 12 70777 Cable Lock for GR1, 2, 3 33 70788 Electrical Circuit Board for GR1, 2, 3 54
70757 Tap Plug for GR1, 2, 3 13 42900 Reduction Motor Sensor for GR1, 2, 3 34 70789 Circuit Board Cover for GR1, 2, 3 55
70758 Lever Tap for GR1, 2, 3 14 70778 Electrical Cable for GR1, 2, 3 35 70790 Controls for GR1, 2, 3 56
70759 Lever Safety Pin (Lower) for GR1, 2, 3 15 70811 Condenser for GR3 36 70791 Drip Tray for GR1, 2, 3 57
70760 Lever Safety Pin (Upper) for GR1, 2, 3 16 70812 P.M. Electric Valve for GR3 37 70792 Drip-Tray Grille in Plastic for GR1, 2, 3 58
70761 Shoulder for GR1, 2, 3 17 70813 Valve Coil for GR3 38 70817 Front Panel for GR3 59
70762 Thermostat for GR1, 2, 3 18 70814 Transformer for GR3 39 70793 Power Switch for GR1, 2, 3 60
70763 Return for GR1, 2, 3 19 70815 Compressor for GR3 40 70818 Rear Panel for GR3 61
70764 Gear Slide for GR1, 2, 3 20 70779 Charge Valve for GR1, 2, 3 41 70794 Side Panel for GR1, 2, 3 62
70765 Main Gears for GR1, 2, 3 21 70780 Feet for GR1, 2, 3 42 61396 Fuse for GR1, 2, 3

14
Electrical Schematics
Model DI-IT-0010-S 39677
Model DI-IT-0020-S 39678
Model DI-IT-0030-S 39679

15
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
www.omcan.com/warrantyregistration.html
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diffusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 3,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3,500 productos con origen a nivel mundial.