Omega HHP-PRX User manual

OVdc Ground
(sensor’s ground)
Connect the sensor to the proper terminals on the
HHP-PRX test box. When a target (steel) is
present, the test box will beep, and the LED on
the front of the box will illuminate. The color of
the LED will indicate the proximity sensor type.
Red LED indicated NPN, and Green LED
indicates PNP.
The carrier will not honor damage
claims unless all shipping material is
saved for inspection. After examining
and removing contents, save packing
material and carton in the event
reshipment is necessary.
18Vdc
( power to sensor)
Black/White: Input
( sensor’s output)
Blue:
+Vs,
’
Immediately report any damage to the shipping
agent.
The HHP-PRX is a very simple to operate sensor
supply box. It is used only with on/off type DC
proximity sensors. It is not to be used for analog
versions, or AC powered proximity sensors.
On the top, you will notice 3 spring terminals.
See the label where you will find the wire colors
indicated.
Brown:
proximity switches
and function of a proximity switch.
LED indicator color determines if the
Open collector is NPN or PNP.
Red: NPN
Green: PNP
Unpacking the Unit
Remove the Packing List and verify that you
have received all equipment. If you have any
questions about the shipment, please call the
OMEGA Customer Service Department at
l-800-622-2378 or [phone].
When you receive the shipment, inspect the
container and equipment for signs of damage.
Note any evidence of rough handling in transit.
~-wire
HHP-PRX
Hand-Held Proximity Switch Tester
Description
Operating the Proximity Tester
The OMEGA@ HHP-PRX Hand-Held Proximity
Switch Tester is used for determining the type
DC Proximity Switches
?? Standard

OMEGA ENGINEERING, INC. wnhout prior written consent of
In whole or in part, electronrc medium or machine-readable form,
photocopred. reproduced. translated,. or reduced to any copred. e
documentatio,n
may not 1993 OMEGA ENGINEERING, INC. All rights reserved. ThisCopyright
rg
OMEGA is a registered trademark of OMEGA ENGINEERING, INC. engineering.
Thus affords our customers the latest in technology andposable.
pqlicy is to make running changes, not model changes, whenever an improve-
ment is
I
problems You are having with the
product.
OMEGA ’s
COST of the
2.
of the repair/calibration,
Model and serial number of product,
fol-
lowing information available BEFORE
contacting OMEGA:
1. P.O. number to cover the
IBRATION. consult OMEGA for current
repair/calibration charges. Have the
!Z& NoN_wARRAHN REPAIRS OR
soetific
FOR
and/orRevair instructions
I
and
3.
rnstrucnons
and/or specific
problems You are having with the
product.
epsu
yarranhl, and
WARRANTY RETURNS, please have
the following information available
BEFORE contacting OMEGA:
P.O. number under which the product
was PURCHASED.
1.
2.
3.
Modal and serial number of the
product under
(IN
ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be
marked on the outside of the return package and on any correspondence.
FOR
(AR) NUMBER FROM OUR CUSTOMER SERVICE DEPARTMENT
PRODUCT(S) TO OMEGA, YOU MUST OBTAIN AN AUTHO-
RIZED RETURN
BEFdRE RETURNING ANY FAX: [phone].
203359-
7811: International: FAX:
l-ECJCI-622-2378,
/ INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA ENGINEERING Customer
Service Department. Call toll free in the USA and Canada:
FAX: [phone]
RETURN REQUESTS
ZB5520 (0455) 6TU. England Telephone: 44
Leicestershk
LE9
As&y, Broughton wannqton Road,
Unifed Kingdom Sales and Disfribufion Center
25
:
?- krvicing
62968934 CABLE OMEGAEASYUNK:
l-800-USA-WHEIP
TELEX: 996404
/ 1-&XW372-9436 l-BC0-622-BESY ’ Engineering Service:
/ l-BOO&Z-2378
l-BCO-W~MEGAIY
Customer Service:
/ 1-8998266342 Sales Service:
856-6886359-7700 FAX: (514)FAX: (203) B56-6928
359-1660 Telephone: (514) (203)
5Al
Telephone: H7L
Lava1 (Quebec) 969978947 USA CT
Bergar
Stamford,
One Omega Drive, Box 4947 976
IdI Free
USA Canada
L..-w-2
Servicing USA and Canada: Call OMEGA
eauipment in such a
manner. arisino out of the use of the
damaae whatsoeverliabilitv or GMEGA and hold OMEGA harmless from anyindemnifrjactivih/, buyer will anv nuclear installa-
tion or
liabilih/ for any damages that result
from the use of the products in accordance with the information contained in the
manual.
SPECIAL CONDITION: Should this eouioment be used in or with
damagaw
Every precaution for accuracy has been taken in the preparation of this manual;
however, OMEGA ENGINEERING, INC. neither assumes responsibility for any omis-
sions or errors that may appear nor assumes
sgocial
the component upon which
liability is based. In no event shall
OMEGA be liable for consequential,
incidental or
price of purchase the oxcoed
indemnification, strict liability or other-
wise, shall not
nogligonco,
based
on contract. warranty,
whether nspoct to this order, OMEGA with the total liability of
sro exclusive
and
herein sot forth buyor romodir of lho UABSJTY: llON OF
UMlTA- PARTlCUlAR PURPOSE ARE HEREBY DISCLAIMED.
MERCHANTABIUTY AND FIT-
NESS FOR A
llIU AND ALL IMPLIED WAR-
RANTIES INCLUDING ANY WARRANTY OF
IMWED.
EXCEPT THAT DF
dofocts.
OMEGA MAKES NO OTHER WAR-
RANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER,
EXPRESSED OR
fro. of spooifled and be as
mwwfactumd by it will parts the thti wwranw Novwtholou. OMEGA only
us. of our various products. the suggastions on offw are glad to
triacs.
We
contea points, fuses, and
mrsuse or other operating conditions outside
of OMEGA ’s control. Components which wear or which are damaged by misuse are
not warranted. These include
malfunctron,
it must be returned to the factory for evaluation. Our Customer Service Department
will issue an Authorized Return (AR) number immediately upon phone or written
request. Upon examination by OMEGA, if the unit is found to be defective it will be
repaired or replaced at no charge. However, this WARRANTY is VOID if the unit
shows evidence of having been tampered with or shows evidence of being dam-
aged as a result of excessive corrosion! or current, heat, moisture or vibration;
improper specification; misapplication;
wsrrwtty to cover handling and shipping time. This ensures that our cus-
tomers receive maximum coverage on each product. If the unit should
yaw
product
(1) one (1) month grace period to the normal
satisfacton, service for a period of
13 months from date of purchase. OMEGA
Warranty adds an additional one
oz.
WARRANTY
OMEGA warrants this unit to be free of defects in materials and workmanship and to
give
7/8 inch)
Weight 4.4
‘/ x ?4 x 2
Mia57/ ’ . .
Specifications
Input
3-wire DC proximity sensors
Operating Temperature
-13 to 168°F (25 to 75°C)
Accessories
None
Terminals
Spring loaded posts accept up ta 12 AWG wire
Power
Two Wdc batteries
Size
Approximate
108 x 57 x 22 mm (4
Sw&h TesterHHP-PRX Hand-Held Proximity