Omron M1 Compact User manual

HEM-4030-E_A_M08_090605.pdf
Check following components!
Vérifier les composants suivants !
Prüfen Sie folgende Teile des Lieferumfangs!
Проверьте следующие компоненты!
Controllare i componenti indicati di seguito!
Należy upewnić się, że zestaw zawiera
wszystkie poniższe elementy!
¡Compruebe los siguientes componentes! Ellenőrizze a következő alkatrészeket!
!ﺔﻴﻟﺎﺘﻟﺍ ﺕﺎﻧﻮﻜﻤﻟﺍ ﻦﻣ ﻖﻘﺤﺗ
Controleer de volgende onderdelen!
Manufacturer OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko, Kyoto,
617-0002 JAPAN
EU-representative OMRON HEALTHCARE EUROPE B.V.
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS
www.omron-healthcare.com
Production facility Productiefaciliteit
Site de production Производственное подразделение
Produktionsstätte
Siedziba produkcji
Stabilimento di produzione Termékképviselet
Oficina de producción ﺝﺎﺘﻧﻹﺍ ﻊﻨﺼﻣ
OMRON (DALIAN) CO., LTD.
Dalian, CHINA
OMRON HEALTHCARE UK LTD.
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.
Subsidiary Dochteronderneming
Succursale Дочерняя компания
Niederlassung Filia
Consociata Leányvállalat
Empresa filial ﺔﻌﺑﺎﺘﻟﺍ ﺕﺎﻛﺮﺸﻟﺍ
OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH
John-Deere-Str. 81a, 68163 Mannheim, GERMANY
www.omron-medizintechnik.de
OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, FRANCE
Uniquement pour le marché français:
OMRON Service Après Vente
NºVert 0 800 91 43 14
[email protected]
www.omron-sante.fr/contact
Fabricado en China ﻦﻴﺼﻟﺍ ﻲﻓ ﻊﻨ ُ ﺻ
Származási ország: Kína
Prodotto in Cina
Wyprodukowano w Chinach
Hergestellt in China
Сделано в КитаеFabriqué en Chine
Geproduceerd in ChinaMade in China
Manual Inflation Blood Pressure Monitor
Model M1
Instruction Manual
Deutsch
Italiano
Español
Nederlands
Русский
Polski
Magyar
IM-HEM-4030-E-02-10/2011
5325678-8D
English
Français
Manual Inflation Blood Pressure Monitor
ModelM1
Instruction Manual
Deutsch
Italiano
Espanõl
Nederlands
Polski
Magyar
IM-HEM-4030-E-01-10/09
5325678-8A
English
Français

c
d
21
M
L
K
GF
HA
J
I
B
S
R
P
N
Q
CE
D
O
HEM-4030-E_en_TOC.fm Page 14 Tuesday, May 19, 2009 3:02 PM
a
b
Contents
Thank you for purchasing the OMRON M1 Manual Inflation Blood Pressure Monitor.
The OMRON M1is acompact manual inflation blood pressure monitor, operating onthe oscillometric
principle. It measures your blood pressure and pulse rate simply and quickly.
Important Safety Information .................................1
1. Overview..........................................................................3
2. Preparation......................................................................4
2.1 Installing/Replacing the Batteries ................ 4
3. Using the Unit..................................................................5
3.1 Applying the A rm Cuff.................................. 5
3.2 How to Sit Correctly..................................... 6
3.3 Taking a Reading ........................................ 7
3.4 Using the Memory Function....................... 10
4. Troubleshooting and Maintenance..........................12
4.1 The Icons and Error Messages ................. 12
4.2 Troubleshooting......................................... 14
4.3 Maintenance.............................................. 16
4.4 Storage...................................................... 17
5. Optional Parts...............................................................18
6. Technical Data..............................................................19
7. Some Useful Information about Blood Pressure.22
Please read this instruction manual thoroughly before using the unit.
Please keep for future reference.
For specific information about your own blood pressure, CONSULT YOUR DOCTOR.

1
EN
Important Safety Information
Consult your doctor prior to using in pregnancy or if diagnosed with arrhythmia or arteriosclerosis.
Please read this section carefully before using the unit.
Warning:
• Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
(General Usage)
• Always consult your doctor. Self-diagnosis of measurement results and self-treatment are dangerous.
• People with severe blood flow problems, or blood disorders, should consult a doctor before using the
unit, as cuff inflation can cause internal bleeding.
(Battery Usage)
• If battery fluid should get in your eyes, immediately rinse with plenty of clean water. Consult a doctor
immediately.
Caution:
• Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury to the user or patient or damage to the equipment or other property.
(General Usage)
• Do not leave the unit unattended with infants or persons who cannot express their consent.
• Do not use the unit for any purpose other than measuring blood pressure.
• Do not disassemble the unit or arm cuff.
• Use only the approved arm cuff for this unit. Use of other arm cuffs may result in incorrect
measurement results.
• Make sure that the air tube is not wrapped around other parts of your body when taking
measurements at night. This could result in injury when the air pressure in the air tube is increased.
• Do not leave the cuff wrapped on the arm if taking measurements during the night. This could result in
injury.
HEM-4030-E_A_M_all.book 1 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

2
Important Safety Information
• Do not inflate the arm cuff over 299 mmHg.
• Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may
result in incorrect operation of the unit.
• Do not operate the unit in a moving vehicle (car, airplane).
(Battery Usage)
• If battery fluid should get on your skin or clothing, immediately rinse with plenty of clean water.
• Use only two “AAA” alkaline or manganese batteries with this unit. Do not use other types of batteries.
• Do not insert the batteries with their polarities incorrectly aligned.
• Replace old batteries with new ones immediately. Replace both batteries at the same time.
• Remove the batteries if the unit will not be used for three months or more.
• Do not use new and used batteries together.
General Precautions
• Do not apply strong shocks and vibrations to or drop the unit and arm cuff.
• Do not take measurements after bathing, drinking alcohol, smoking, exercising or eating.
• Do not forcibly bend the arm cuff or bend the air tube excessively.
• When removing the air tube, pull the air tube with holding near the air jack.
• Do not inflate the arm cuff when it is not wrapped around your arm.
• Do not wash the arm cuff or immerse it in water.
• Read and follow the “Important information regarding Electro Magnetic Compatibility (EMC)” in the
Technical Data Section.
• Read and follow the “Correct Disposal of This Product” in the Technical Data Section when disposing
of the device and any used accessories or optional parts.
HEM-4030-E_A_M_all.book 2 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

3
EN
1. Overview
Main unit
Display
M (Memory) button
I/O (Power switch) button
Air jacks for cuff and inflation bulb
Battery compartment
Arm cuff
Arm cuff
(Medium cuff: arm
circumference 22-32 cm)
Air tube
Inflation bulb
Air release button
Air tube
Air inflation bulb
Display
Systolic blood pressure
Diastolic blood pressure
Pulse display
Memory No. symbol
Deflation symbol
Heartbeat symbol
1. Flashes during measurement
2. If flashing after measurement complete
indicates blood pressure out of recommended
range
Reinflation symbol
Battery low symbol
Memory symbol
Open the rear cover page to read following:
The alphabet in the rear cover page correspond to those in the body page.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
HEM-4030-E_A_M_all.book 3 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

4
2. Preparation
2.1 Installing/Replacing the Batteries
1. Remove the battery cover.
2. Insert two “AAA” batteries
as indicated in the battery
compartment and then
replace the battery cover.
Notes:
• If the battery low symbol ( ) appears on
the display, turn the unit off then replace
both batteries at the same time.
• The measurement values continue to be stored in memory even after the batteries are replaced.
Disposal of used batteries should be carried out in accordance with the national regulations for the
disposal of batteries.
HEM-4030-E_A_M_all.book 4 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

5
EN
3. Using the Unit
3.1 Applying the Arm Cuff
Remove tight-fitting clothing or tight rolled up sleeve from your upper arm.
Do not place the cuff over thick clothes.
1. Insert the air tubes into the air jacks.
2. Put your arm through the cuff loop.
3. Position the arm correctly.
The bottom edge of the cuff should be 1 to 2 cm above the elbow. Marker (arrow under
tube) is centred on the middle of your inner arm. Close the fabric fastener FIRMLY.
Notes:
• When you take a measurement on the right arm, air tube will be at the side of your elbow. Be
careful not to rest your arm on the air tube. ---
• The blood pressure can differ between the right arm and the left arm, and therefore also the
measured blood pressure values can be different. Omron recommends to always use the same
arm for measurement. If the values between the two arms differ substantially, please check with
your physician which arm to use for your measurement.
Open both the front and rear covers to read following:
The alphabet and number in the cover page correspond to those in the body page.
G
I
D
a
b
HEM-4030-E_A_M_all.book 5 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

6
3. Using the Unit
3.2 How to Sit Correctly
To take a measurement, you need to be relaxed and comfortably seated, under comfortable room
temperature. No eating, smoking or exercising 30 minutes before taking a measurement.
• Sit on a chair with your feet flat on the floor.
• Sit upright with your back straight. ---
• The cuff should be at the same level as your heart. ---
c
d
HEM-4030-E_A_M_all.book 6 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

7
3. Using the Unit
EN
3.3 Taking a Reading
Note:
Remain still while taking measurement.
1. Press the air release button to release any air in the arm cuff,
then press the I/O button to turn the unit on.
Note:
If the deflation symbol does not disappear soon, press the air release button to release any air in the arm cuff.
2. Pump the inflation bulb to inflate the arm cuff.
1) Inflate the cuff until it is 30 to 40 mmHg above your expected
systolic blood pressure value.
ex) If your expected blood pressure is around 140mmHg, inflate the arm
cuff to between 170 and 180 mmHg. Inflate the cuff rapidly so that the
pressure is reached in about five seconds.
2) When the desired pressure has been achieved, release the inflation bulb.
Notes:
• If the reinflation symbol ( ) appears, squeeze the inflation bulb to re-inflate the arm cuff.
• Do not inflate the arm cuff more than necessary.
HEM-4030-E_A_M_all.book 7 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

8
3. Using the Unit
3. Measurement starts.
Measurement starts automatically after you stop inflating the arm cuff.
Notes:
• To cancel a measurement, press the I/O button to turn off the unit and press the air release
button to release the air in the arm cuff.
• Wait 2-3 minutes before taking another blood pressure measurement. Waiting between
readings allows the arteries to return to the condition prior to taking the blood pressure
measurement.
Warning:
Self-diagnosis of measured results and treatment are dangerous. Please follow the
instructions of your doctor.
START DEFLATE END
COMPLETE
Press the air release button
to release the air in the arm
cuff until the deflation symbol
is no longer displayed.
HEM-4030-E_A_M_all.book 8 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

9
3. Using the Unit
EN
4. Remove the arm cuff.
5. Press the I/O button to turn off the monitor.
The monitor automatically stores the measurement in its memory.
It will automatically turn off after five minutes.
Important:
• If your systolic or diastolic pressure is outside the standard range, the
heartbeat symbol will blink when the measurement result is displayed.
Recent research suggests that the following values can be used as a
guide to high blood pressure for measurements taken at home.
This criteria is for home blood pressure measurement.
For professional office blood pressure measurement criteria, please refer to Chapter 7.
Systolic Blood Pressure Above 135 mmHg
Diastolic Blood Pressure Above 85 mmHg
HEM-4030-E_A_M_all.book 9 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

10
3. Using the Unit
3.4 Using the Memory Function
The monitor automatically stores the result up to 14 sets.
Note:
If the memory is full, the monitor will delete the oldest readings.
Previous Reading
Turn the Unit on View Previous
Reading
• The Memory number
appears for a second
before the pulse rate is
displayed. The newest
set is numbered “1”.
View Readings
Stored in Memory
• Press repeatedly to
cycle through the
previous results.
• Hold down to cycle
rapidly.
HEM-4030-E_A_M_all.book 10 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

11
3. Using the Unit
EN
To delete all the values stored in memory
When the memory symbol ( ) appears, first press the M button. Then while holding it down,
press the I/O button simultaneously for about 2-3 seconds.
Note:
You cannot partially delete the stored readings.
HEM-4030-E_A_M_all.book 11 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

12
4. Troubleshooting and Maintenance
4.1 The Icons and Error Messages
Error Display Cause Remedy
The systolic blood pressure is above
135 mmHg or diastolic blood pressure
is above 85 mmHg.
These criteria are for home blood pressure
measurement. For professional criteria,
please refer to Chapter 7.
The batteries are low. You should replace them with new ones
ahead of time.
Refer to section 2.1.
The batteries are exhausted. You should replace them with new ones at
once.
Refer to section 2.1.
Blink
Lit
HEM-4030-E_A_M_all.book 12 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

13
4. Troubleshooting and Maintenance
EN
Cuff is under inflated.
Carefully read and repeat the steps listed
under section 3.3.
Movement during measurement.
Cuff over inflated.
Device error.
Contact your OMRON retail outlet or
distributor.
Refer to Chapter 6.
Pressure is too low.
Press the inflation bulb to inflate the arm
cuff until the reinflation symbol goes out.
Or, deflate the arm cuff and repeat
measurement after checking that the
heartbeat symbol ( ) has been displayed.
Refer to section 3.3.
Error Display Cause Remedy
HEM-4030-E_A_M_all.book 13 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

14
4. Troubleshooting and Maintenance
4.2 Troubleshooting
Problem Cause Remedy
The reading is extremely low (or
high).
Arm cuff not applied correctly. Apply the arm cuff correctly.
Refer to section 3.1.
Movement or talking during
measurement.
Remain still and do not talk
during measurement.
Refer to section 3.3.
Clothing is interfering with the
arm cuff.
Remove any clothing
interfering with the arm cuff.
Refer to section 3.2.
Arm cuff pressure does not rise.
The air tube is not securely
connected into the main unit.
Make sure that the air tube is
connected securely.
Refer to section 3.1.
Air is leaking from the arm cuff.
Replace the arm cuff with a
new one.
Refer to Chapter 5.
HEM-4030-E_A_M_all.book 14 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

15
4. Troubleshooting and Maintenance
EN
Cannot measure or readings are
too low or too high.
The arm cuff has not been
inflated sufficiently.
Inflate the cuff so that it is 30 to
40 mmHg above your previous
measurement result.
Refer to section 3.3.
The air release button being
pressed during inflation.
Be careful not to press the air
release button during
measurement.
The unit loses power during
measurement. The batteries are empty.
Replace the batteries with new
ones.
Refer to section 2.1.
Nothing happens when you
press the buttons.
The batteries are empty.
Replace the batteries with new
ones.
Refer to section 2.1.
The batteries have been
inserted incorrectly.
Insert the batteries with the
correct (+/-) polarity.
Refer to section 2.1.
Other problems.
• Press the I/O button and repeat measurement.
• If the problem continues, try replacing the batteries with new
ones.
If this still does not solve the problem, contact your OMRON
retail outlet or distributor.
Problem Cause Remedy
HEM-4030-E_A_M_all.book 15 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

16
4. Troubleshooting and Maintenance
4.3 Maintenance
To protect your unit from damage, please observe the following:
• Do not subject the main unit, cuff and inflation bulb to extreme temperatures, humidity, moisture or
direct sunlight.
• Do not fold the cuff or tubing tightly.
• Do not inflate the arm cuff over 299 mmHg.
• Do not disassemble the unit.
• Do not subject the unit to strong shocks or vibrations (for example, dropping the unit on the floor).
• Do not use volatile liquids to clean the main unit. The unit should be cleaned with a soft, dry cloth.
• Use a soft, moistened cloth and soap to clean the arm cuff.
• Do not wash the arm cuff or immerse it in water.
• Do not use petrol, thinners or similar solvents to clean the arm cuff.
• Do not carry out repairs of any kind yourself. If a defect occurs, consult your OMRON retail outlet
or distributor as mentioned on the packaging.
Calibration and Service
• The accuracy of this blood pressure monitor has been carefully tested and is designed for a long
service life.
• It is generally recommended to have the unit inspected every two years to ensure correct
functioning and accuracy. Please consult your authorised OMRON dealer or the OMRON
Customer Service at the address given on the packaging or attached literature.
HEM-4030-E_A_M_all.book 16 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

17
4. Troubleshooting and Maintenance
EN
4.4 Storage
Keep the unit in its storage case when not in use.
Do not keep the main unit being wound with the arm cuff.
1. Unplug the air tubes from the air connector.
2. Gently fold the air tube into the arm cuff.
Note:
Do not bend the air tube excessively.
3. Place the arm cuff, inflation bulb and main
unit in the storage case.
Do not store the unit in the following situations:
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct
sunlight, dust or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at an angle.
HEM-4030-E_A_M_all.book 17 ページ ２０１１年１１月１８日 金曜日 午後４時５０分

18
5. Optional Parts
Note:
Should you require a small cuff, please ensure that the small cuff and small bulb are used together.
They may also be purchased as a combination set.
Medium Arm Cuff
Arm circumference 22 - 32 cm
Large Arm Cuff
Arm circumference 32 - 42 cm
Small Arm Cuff
Arm circumference 17 - 22 cm
Small cuff and bulb combination
Arm circumference 17 - 22 cm
Regular bulb
CM2-9513256-6 (Model: HEM-CR24)
CM1-9997578-9
CL2-9513255-8 (Model: HEM-CL24)
CL1-9996760-3
CS-4997067-0
4997099-9
4997965-1
HEM-4030-E_A_M_all.book 18 ページ ２０１１年１１月１８日 金曜日 午後４時５０分