Omron V700 series User manual

PNSPO
!!
+
Electromagnetic RFID System
V700
•Cost-effective and very reliable.
•It is ideal for use in conveyor sorting
systems, tool identification in assembly
lines, process control in automated
production lines, inventory control in
warehouses, general tracking and
tracing of goods and optimizing
distribution management.
•Tags for use in temperature ranges up
to 180 °C
Omron’s V700 is a high-performance Radio Frequency Identification (RFID) system that can locate, track &
trace and deliver important data on almost any kind of product or object in any industrial application. The
system provides fast, reliable contact-less read/write (R/W) communication over long distances, even when
operating in the toughest environmental coupled with the V700’s integrated antenna and controller, make it a
compact and cost-effective conditions. Low-cost ID tags, solution, especially in applications that require
multiple tags. The V700’s multiple read function enables it to provide convenient bulk identification, and
controllers can be grouped together for synchronized reading/writing to prevent mutual interference.
Ordering information
1 V700 - Electromagnetic Inductive System

PNSPO
!!
A versatile system that’s easily expandable. Any number of tags can be added to the V700 system, and it’s
also possible to keep expanding the system via RS-232C/RS-485 link units (V700-L12/ addressable). The
V700 conforms to CE and FCC standards, making it suitable for use throughout Europe and the USA.
Tags that can handle the toughest conditions
The tags meet IEC IP67 requirements and are designed for the harshest environments. They can operate in
temperatures varying from -40˚to +180˚C (for the V700-D23P31) during transmission, and are unaffected by
storage temperatures ranging from -40˚to +110˚C. Designed for long-term operation, these tags can be read
to and written from more than 100.000 times! Their robust design makes them ideal for use in laundries, paint
shops and almost any outdoor application.
No mutual interference
In a situation where several antennas are operating close together, it’s possible to synchronize the controllers
to prevent mutual interference of the antennae.
Dry cleaning
The ability of the V700’s tags to withstand chemical influences and heat make them ideal for use in the
extreme conditions associated with the chemical dry-cleaning process.
The compact tags can be sewn directly into garments, and remain attached even during cleaning, which
makes the sorting process easier afterwards.
Paint-shop production lines
The V700 guarantees very reliable identification, especially when used with Omron PLCs and sensors, which
makes it ideal for use in smart automation control. Postal sorting The V700 is like an electronic accompanying
goods note, enabling operators to track and trace post boxes and optimize distribution management.
2 V700 - Electromagnetic Inductive System

PNSPO
!!
3 V700 - Electromagnetic Inductive System

PNSPO
!!
4 V700 - Electromagnetic Inductive System

PNSPO
!!
Communication diagram
5 V700 - Electromagnetic Inductive System

PNSPO
!!
Dimension drawings – Tags & Reader
6 V700 - Electromagnetic Inductive System

PNSPO
!!
System Configuration
V700-HMD11-1 (5V via connector)
D-Link V700-L12 (addressable)
RS232 / RS485 Link unit
Host device
with RS232 /
RS 485
interface
V700-HMD11
(separate 5V connector)
7 V700 - Electromagnetic Inductive System

PNSPO
!!
Functions
Transmission Functions
V700-HMD11 /-1
Single access Provided
FIFO Provided
Multiple access Not provided
Selective Not provided
ID Tag Transmission distance
V700-D23-P31 8 to 43 mm
V700-D23-P41 0 to 37 mm
Transmission Time (Reference)
The transmission time is the time required for transmission between antenna and ID tag and does not include time required for host
communication.
V700-HMD11 /-1
Read T = 48N + 66
Write T = 55N + 120
Note: T = Transmission time
N = Number of pages (1 page = 8 bytes)
Precautions for using the product near noise sources
This product makes transmissions to ID Tags using a frequency of 125kHz. Transceivers, motors, monitoring
devices, and power supplies have parts that generate electromagnetic waves (noise). These waves may
interfere with transmissions to ID Tags. Before using this product near these kinds of devices, check that there
is no adverse affect on transmissions.
8 V700 - Electromagnetic Inductive System

PNSPO
!!
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products. Please consult your OMRON
representative if you have any questions or comments. WARRANTY OMRON’s exclusive warranty is that the
products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-
INFRINGEMENT, MERCHANTABILITY, OR FITNESSFOR PARTICULAR PURPOSE OF THE PRODUCTS.
ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED
THATTHE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS ORIMPLIED.LIMITATIONS OF
LIABILITYOMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANYWAY CONNECTED WITH THE
PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR
STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the
product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY,
REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON’SANALYSIS CONFIRMS
THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TOCONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR
REPAIR.SUITABILITY FOR USETHE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY
RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OFPERSONS, AND SHOULD
NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES.
Please refer to separate catalogs for OMRON's safety rated products. OMRON shall not be responsible for
conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product. At the customer’s request, OMRON will provide applicable third
party certification documents identifying ratings and limitations of use that apply to the products. This
information by itself is not sufficient for a complete determination of the suitability of the products in
combination with the end product, machine, system, or other application or use. The following are some
examples of applications for which particular attention must be given. This is not intended to be an exhaustive
list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the
products:
•Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or
uses not described in this document.
•Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical
equipment, amusement machines, vehicles, safety equipment, and installations subject to separate
industry or government regulations.
•Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS AWHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR
THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for the user in determining suitability and
does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and
Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other
reasons. It is our practice to change model numbers when published ratings or features are changed, or when
significant construction changes are made. However, some specifications of the product may be changed
without any notice. When in doubt, special model numbers may be assigned to fix or establish key
specifications for your application on your request. Please consult with your OMRON representative at any
time to confirm actual specifications of purchased products.
9 V700 - Electromagnetic Inductive System

PNSPO
!!
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when
tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no
responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PROGRAMMABLE
PRODUCTS OMRON shall not be responsible for the user’s programming of a programmable product, or any
consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without permission. This document is protected by
copyright and is intended solely for use in conjunction with the product. Please notify us before copying or
reproducing this document in any manner, for any other purpose. If copying or transmitting this document to
another, please copy or transmit it in its entirety.
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. E49E-EN-01