Omron E6L User manual

E-17E6L
E6L
Easy scale (linear encoder)
E6L
Best for conveyance use
• It is strong for scale fluttering because of an original
optical system design (detection scale: 6 mm
±3 mm)
• Low cost original optical system design
• Suitable for positioning of conveyance use 1 mm
resolution
• Two types (280 mm and 475 mm) of detection scale
length are available. Scale to be chosen as re-
quired.
• Extension of a detection stroke by two or more con-
nection of a scale is possible.
Ordering Information
Linear encoder
Detection scale
Supply voltage Resolution Model
24 VDC 1 mm E6L-HW4C
Overall length Package Model
280 mm 1E6L-S1M-1280
10 E6L-S1M-10280
475mm 1E6L-S1M-1475
10 E6L-S1M-10475

E-18 Rotary Encoders
Dimensions (Unit: mm)
Linear encoder
E6L-HW4C
Detection scale
E6L-S1M-1280
E6L-S1M-10280
E6L-S1M-1475
E6L-S1M-10475
Installation dimensions
E6L-HW4C+E6L-S1M-#
Note: If either an E6L-HW4C side nor the E6L-S1M
side is used in the moving state, "FWD" and
"REV" of E6L-HW4C show the direction to which
E6L-HW4C performs a relative movement to
E6L-S1M. (based on the scale)
38
19
15.3
12.1
Detecting-element
8.6
35
4.7
10
17.314.6
25 6.5
12 12
Mounting datums
Three, 4.5 dia.
19 19±0.2
Three, M4
25±0.2
35±0.2
7.4
34.5
Mounting Face
Shielded cable of 6 dia.
4 cores conductor cross-sectional area: 1.26mm2;
insulation diameter: 1.04mm Standard length: 1m
10 34.7
44.7
6.5
21
Mounting Dimensions
13
26
30
45 43.6
10
Two,
1.5 dia.
3.6 dia.
65
B (see note)
A (see note)
2
65±0.2 65±0.2 65±0.2
C-M3 (see note)
Mounting Dimensions
Material: Stainless
steel (SUS304)
Thickness: 0.3 mm
Model A B C
E6L-S1M-1 280/E6L-S1M-10 280 280 4 x 65 =
260 5
E6L-S1M-1 475/E6L-S1M-10 475 475 7 x 65 =
455 8
19
49
45
Linear Encorder E6L-HW4C
Detecting-scale E6L-S1M-#
E6L-HW4C movement direction
REV FWD
Detecting-element
Detecting-area
27.5
5 dia.
21
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. F02E-EN-01