One Remote 30014002 User manual

OneRemote Bluetooth receiver
Receiver for a B&O Radio or TV
User manual
30014002u1uk

www.oneremote.dk
2
Stream music to a Bang & Olufsen radio or TV from:
•Smartphones
•Tablets
•PC
•Other Bluetooth sources
Installation
The OneRemote Bluetooth device can operate both as a transmitter or a receiver. The color of
the LED lamp indicates whether it is programmed as a receiver or transmitter.
1. BLUE indicates that the Bluetooth module is in Receiving mode.
2. RED indicates that the Bluetooth module is in Transmitting mode.
When using it for streaming TO a Bang & Olufsen device from a Smartphone, TV or other
device, it must be in Receiving mode. Receiving sound from a device to be played via the Bang
& Olufsen Radio or TV.
When inserting the Bluetooth receiver into the Power Supply, the LED will light up in either
Blue or Red, indicating the current mode. If the LED is flashing, it indicates that it is waiting to
be paired with the Smartphone or other transmitting device. Once it has been paired, the LED
will stop flashing.
If the Bluetooth receiver is not in Receiving mode (BLUE) it must be programmed. Changing
mode is very easy. Simply insert the Bluetooth device into the Power Supply and see if the LED
has the right color BLUE. If not, take out the Bluetooth device and insert it again. This might
need to be repeated, depending of the current setting of the Bluetooth device.
On the transmitting device, look for the pairing name: KN323

www.oneremote.dk
3
Bang & Olufsen Socket types
The BlueTooth receiver may be connected to any Bang & Olufsen Radio or TV, only the right cable
must be used between the receiver and the Bang & Olufsen device.
•DIN connector
The majority of Bang & Olufsen radios uses DIN connectors for connection of Tape
recorders, CD players and other AUX sources. A DIN connector cable is included.
•RCA connector
A few Bang & Olufsen radios use RCA connectors for connection of an AUX source. An RCA
connector cable is included.
•Scart connector
A scart socket may be used as an audio input on a Bang & Olufsen TV. To achieve this an
extra Scart adaptor must be used, that is not included.
Included
•USB Power supply with EURO mains connector.
•3.5 mm Jack to DIN connector cable.
•3.5 mm Jack to 3.5 mm Jack cable.
•3.5 mm Jack to RCA cable.
Specifications
Technologies: BT5.0, A2DP, AVRCP (receiver mode only)
Operation Range: Up to 10m / 33ft (without any blocking objects)
Pairing name: KN320 (Receiver mode )
Transmitter mode: red LED light is on
Receiver mode: blue LED light is on
Dimensions: 32mm*17mm*8.5mm