Onespace 50-JN1407 User manual

ASSEMBLY INSTRUCTIONS
7
For fastest service on claims, requests for replacement parts,
www.comfortproducts.net/support
e-mail: [e-mail]
Keep your sales receipt as documentation of your own
OneSpace is a Trademark of Comfort Products, Inc.
™
ership.
CUSTOMER SERVICE
or questions, please visit our website at:
MODEL 50-JN1407
SUPPLIER CODE: JNFF
COOL BLUE GLASS WRITING DESK WITH BRUSHED ALUMINUM FRAME

ASSEMBLYOVERVIEW
Tabletop maximum
weight capacity
= 50 lbs.
2
Drawer maximum
weight capacity
= 20 lbs.

HARDWARE KIT
STOCK # 51-JN1407HA
PART DESCRIPTION QTYSTOCK NO
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT
WWW.COMFORTPRODUCTS.NET/SUPPORT REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL.
SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART WILL NORMALLY
BE SHIPPED WITHIN 48 HOURS.
1
51-JN1407DTDesktop
1
4
51-JN1407LSLeg Support
2
4
51-JN1407LG
Leg3
PART DESCRIPTION QTY
PARTS AND HARDWARE LIST
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
Extra Hardware Pack
M6X15MM
M6X18MM
Allen Wrench
A
B
C
16
12
1
1
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE A POWER DRILL.
3

4
ASSEMBLY INSTRUCTIONS
STEP 1
Attach the leg supports (2) to the desktop (1) with sixteen screws (A). Make sure the supports are angled toward the
corners of the desk as shown.
STEP 2
Slide the legs (3) over the leg supports (2) aligning the holes for the screws. Fasten the legs to the leg supports with
twelve screws (B).
A x 16
B x 12
x 3
x 4
C
C

5
•
•
•
DO NOT stand on the desk. Do not use the desk as a stepladder.
ed.
Every 6 months, check all bolts and screws to ensure they are tight.
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers
as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product mo sure
to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user
customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity of the desktop is
50 pounds and the weight capacity of the drawer is 20 pounds. For claims or questions concerning this warranty, please visit:
www.comfortproducts.net or email us at: [email protected]
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
OneSpace is a Trademark of Comfort Products, Inc.
™
MODEL: 50-JN1407
Comfort Products, Inc.
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
Product made in China.
www.comfortproducts.net