Onespace 50-JN02 User manual

LOFT WRITING DESK WITH STEEL FRAME, WOOD SURFACE
ASSEMBLY INSTRUCTIONS

2
Desktop maximum
weight capacity
=
150 lbs

HARDWARE KIT
STOCK #
PART DESCRIPTION QTYSTOCK NO
REPLACEMENT PARTS
4
Caster6
PART DESCRIPTION QTY
PARTS AND HARDWARE LIST
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
Extra Hardware Pack
M6X15MM
M6X20MM
M6X40MM
Allen Wrench
A
B
C
16
4
4
M6X12MMD 4
E1
1
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE A POWER DRILL.
3
1Desktop Frame 1
2Leg 4
3Desktop 1
4Back Support Bar 1
5Side Support Bar 2
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT
OUR WEBSITE,REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE
THE INFORMATION, INCLUDING THE PART YOU NEED.

4
ASSEMBLY INSTRUCTIONS
STEP 2
(i) Align the side support bars (5) with the legs (2).
(ii) Fasten them with four screws (A) and four screws (B).
(iii) Fasten the back support bar (4) to the side bars using four screws (C).
STEP 1
Attach the legs (2) to the desktop frame (1) using eight screws (A).
A x 8
A x 4
B x 4
C x 4
i ii iii
A
A
2
B
B
C
4
2
A
1
5
E
E
NOTE: Some of the screws are of similar length. Observe carefully which screw is needed before beginning each step.

5
ASSEMBLY INSTRUCTIONS
STEP 3
Attach the assembled frame to the desktop (3) with four screws (D) using the brackets on the desktop frame (1).
STEP 4
Screw a caster (6) into the bottom of each leg.
D x 4
3
6
E

6
SAFETY AND MAINTENANCE
•
DO NOT stand on the desk. Do not use the desk as a stepladder.
•
•
Every 6 months, check all bolts and screws to ensure they are tight.