Onespace 50-JN23TV User manual

7
,straptnemecalperrofstseuqer,smialcnoecivrestsetsafroF
www.comfortproducts.net/support
e-mail: [e-mail]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
:taetisbewruotisivesaelp,snoitseuqro
ASSEMBLY INSTRUCTIONS
MODEL 50-JN23TV
SUPPLIER CODE: JNFF
RUSTIC INDUSTRIAL LOCKER TV STAND

PARTS LIST
Please look for part indicator on the side of the part. It is either stamped or on a labeled sticker.
A
PART DESCRIPTION STOCK# QTY
B
C
D
E
F
G
H
I
J
K
Tabletop
Left Wall
Right Inner Wall
Left Inner Wall
Shelf
Backboard
Right Wall
Left Door
Right Door
Floor
Floor Trim
51-JN23TVA
51-JN23TVB
51-JN23TVC
51-JN23TVD
51-JN23TVE
51-JN23TVF
51-JN23TVG
51-JN23TVH
51-JN23TVI
51-JN23TVJ
51-JN23TVK
1
1
1
1
1
1
1
1
1
1
1

1
3
5
7
9
2
4
6
8
10
Minix Bolt
Minix Lock
Door Pin
4x18mm Screw
Door Magnet
Peg
7x50mm Screw
Washer
Door Handle
3x14mm Screw
x16
x16
x8
x4
x2
x18
x4
x2
x2
x4
HARDWARE KIT Stock # 51-JN23TVHA
How to use the minifix bolt and lock system:

Start by inserting Pegs into all the following wood pieces:
ASSEMBLY
1

3
2
9
10
10
9
Attach the Door Magnets (9) to the Tabletop (A) using two 3x14mm Screws (10) each.
Mount the Floor Trim (K) to the Floor (J) use minix bolts (1) and locks (3).
4Attach the Door Handles (8) to the Doors using 4x18mm Screws (7).
7
7

5Attach the Floor (J) to the Left Wall and Right Wall using Minix Bolts (1) and Locks (3) as shown.
You will screw three bolts into each wall. (This step is shown upside down).
J
6Attach the Left Inner Wall (D) and Right Inner Wall (C) to the Floor (J) using the pre-inserted
Pegs and the 7x50mm Screws. The insert the Backboard (F).

7Door Pins (5). (NOTE: Use a washer (6) with the bottom Door Pins.)
Lastly, insert two door pins in each Inner Wall, at the level of your choice.
1
1
1
1
1
11
1

WEIGHT CAPACITY
110 LBS

Comfort Products, Inc.
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
email: [email protected]
www.comfortproducts.net
• DO NOT stand on the table. Do not use the table as a stepladder.
•
• Every 6 months, check all bolts and screws to ensure they are tight.
• This products is California 93120 Compliant for Formaldehyde.
6 of 6
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR W ARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products' authorized dealers
as shown by
the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort
Products' option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product modi cation, intentional damage, re, misuse, negligence, or exposure
to the elements;
labor or assembly cost. This warranty does not cover the cost of transportation or labor . In no event shall Comfort
Products be liable in either tort or contract for any loss
or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty
is NOT applicable to end user customers who use Comfort Products for rental purposes. This warranty applies only to end-
user customers in the United States.
All warranties are limited to the original purchaser for normal use. The weight capacity is de ned as 110
pounds (unless otherwise
speci ed). For claims or questions concerning this warranty, please visit www. comfortproducts.net /support. e-
mail :
[e-mail]
MODE L : # 50-JN23TV
table