Onespace 50-812ES User manual

MODEL 50-812ES
SUPPLIER CODE: PMEX
ASSEMBLY INSTRUCTIONS
8 Cube Organizer, Espresso
For fastest service on claims, requests for replacement parts, or
questions, please visit our website at
www.comfortproducts.net/support
e-mail: [email protected]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
OneSpace is a Trademark of Comfort Products, Inc.
™

2 OF 12
1
2
3
4
5
5
6
7
7
9
8
8
Shelf maximum
weight capacity
=10lbs
Top maximum
weight capacity
=40lbs

3 OF 12
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED. THE PART
WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
PART DESCRIPTION QTY
STOCK NO
1
51-812ESA
Side Panel Left
1
1
51-812ESB
Side Panel Right
2
1
51-812ESC
Top Panel
3
1
51-812ESD
Bottom Panel
4
PART DESCRIPTION QTY
STOCK NO
1
51-812ESF
Shelf Panel B
6
2
51-812ESG
Center Panel A
7
2
51-812ESH
Center Panel B
8
4
51-812ESJ
Back Panel
9
2
51-812ESE
Shelf Panel A
5
HARDWARE KIT
STOCK # 51-812ESKIT
PART DESCRIPTION QTY
24
A
24
Cam
B
18
Wood Dowel (6 x 30mm)
C
D
E
F
12
CSK Screw (M4.7 x 38mm)
Allen Key (M4)
24
Cam Caps
1

two Shelf Panels A (5), Shelf Panel B (6), two Center Panels A (7) and two Center Panels B (8).
Top Panel (3), two Shelf Panels A (5), and Shelf Panel B (6).
1
2
5
5
6
7
7
8
8
Part # C x 18
Part # A x 24
12
3
6
4 OF 12
5
5
A
boards as well as to the placement of the bolts.

Use two CSK Screws (D) to attach Shelf Panel A (5) and Center Panel A (7). Make sure that the grooves
for the Back Panel are aligned and that the bolts are facing out (the grooves referred to are on the sides not
shown in the drawing below). All grooves should be at the bottom.
7
5
Part # D x 2pcs
Part # B x 2pcs
7
5
8
Part # E x 2pcs
5 OF 12
While doing this make sure that the grooves for the Back Panel are aligned. Tighten the two
Grooves at the
bottom
Bolts facing
out

6 OF 12
Part # B x 2pcs
Part # E x 2pcs
Use two CSK Screws (D) to attach the Shelf Panel B (6) and Center Panel B (8). Make sure that the
grooves for the Back Panel are aligned.
7
5
8
6
7
7
5
8
6
Part # D x 2pcs
Cams (B) clockwise and then cover them with Cam Caps (E).

Use two CSK Screws (D) to attach Shelf Panel A (5) to Center Panel A (7). Make sure that the grooves
for the Back Panel are aligned.
7
5
5
8
67
7
5
5
8
6
7
8
Step 7:
Step 8:
Part # D x 2pcs
7 OF 12
Part # B x 2pcs
Part # E x 2pcs
clockwise and then cover them with Cam Caps (E).

8 OF 12
Step 9:
Step 10:
7
5
5
8
6
7
8
7
5
5
8
2
6
7
8
9
Part # B x 6pcs
Part # E x 6pcs
both Shelf Panels A (5) and Shelf Panel B (6). While doing this make sure that the groove in Side Panel
clockwise and then cover them with Cam Caps (E).
both
back
Note the orientation of the short
and long sides.

9 OF 12
Step 11:
Step 12:
7
7
7
5
5
5
6
2
2
9
8
6
7
8
8
8
1
Part # B x 6pcs
Part # E x 6pcs
5
both Shelf Panels A (5) and Shelf Panel B (6). While doing this make sure that the groove in Side Panel Left (1)
then cover them with Cam Caps (E).
both Shelf Panels A

10 OF 12
Step 13:
Step 14:
7
7
5
5
6
1
2
9
8
8
7
7
5
5
6
1
4
2
9
8
8
Use six CSK Screws (D) to attach the Bottom Panel (4) to Side Panel Left (1), Side Panel Right (2) and
Center Panel B (8). Make sure that the groove in the Bottom Panel (4) is aligned with the panel
which you have just inserted.
Part # D x 6pcs

11 OF 12
Step 15:
9
1
1
6
5
7
8
8
75
4
3
2
5
7
7
8
8
6
5
2
4
Part # B x 6pcs
Part # E x 6pcs
Step 16:
the Top Panel (3) to the Side Panel Left (1), Side Panel Right (2) and Center Panel A (7). Make sure that
clockwise and then cover them with Cam Caps (E).

•
•
•
•
12 OF 12
DO NOT stand on the desk. Do not use the desk as a stepladder.
ed.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products, Inc.
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers
as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product mo sure
to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user
customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity is de
10 pounds for the shelves and 40 pounds for the top panel. For claims or questions concerning this warranty, please visit:
www.comfortproducts.net or email us at: [email protected]
MODEL: # 50-812ES
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
www.comfortproducts.net
[email protected]
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
OneSpace is a Trademark of Comfort Products, Inc.
™