Onespace 50-JN02 User manual

ADJUSTABLE MOBILE LAPTOP DESK, SINGLE SURFACE
ASSEMBLY INSTRUCTIONS
MODEL 50-JN02
SUPPLIER CODE: JNFF
OneSpace is a Trademark of Comfort Products, Inc.
™

2 of 6
mumixamelbatpotpaL
weight capacity
=
22lbs
A
I
G
H
D
C
B
E
E
F
F
J

HARDWARE KIT
STOCK # 51-JN02HA
PART DESCRIPTION QTY
STOCK NO
3 of 6
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT.
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED.
THE PART WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
1
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
51-JN02LB
Laptop
Board
A
1
51-JN02BS
Base
B
1
51-JN02BSP
Bottom Support
C
1
51-JN02TSP
Top Support
D
PART DESCRIPTION QTY
STOCK NO
1
51-JN02PA
Pivot Anchor
G
H
PART DESCRIPTION QTY
4
1
4
2
4
3
2
4
PARTS AND HARDWARE LIST (50-JN02)
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
1
51-JN02TK
Tilt Knob
2
51-JN02SK
Support Knob
I
2
51-JN02CA
Caster
E
2
51-JN02CAL
Locking Caster
F
J
51-JN02UB 1
U Bracket
M6X30MM
M6X10MM
M6 Nut
Washer
Allen Key
Extra Hardware Pack
(1-4)
5

4 of 6
ASSEMBLY INSTRUCTION (50-JN02)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
STEP 2
Attach the Pivot Anchor (G) to the Laptop Board (A) using two screws (2).
STEP 1
Screw in Locking Casters (F) to the front of Base (B). Screw in non-locking
Casters (E) to the back of Base.
Attach Bottom Support (C) to Base using (1) and (3).
1
2
3
Pcs
Pcs
E
F
Pcs
2
E
F
2
C
B
A
G

5 of 6
ASSEMBLY INSTRUCTION (50-JN02)
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
STEP 3
Insert upper section of Laptop Desk into the Bottom Support using
the Support Knobs (J). Adjust to desired height.
4
STEP 4
Attach the Pivot Anchor (G) to the Top Support (D) using two Washers (4) and Tilt Knob (I).
Attach the U Bracket (H) to the Laptop Board (A) using two screws (2).
2Pcs
2
Pcs
2
I
4
D
2
H
A
J

6 of 6
Comfort Products, Inc.
P.O. Box 999
Memphis, TN 38101
www.comfortproducts.net
[email protected]
OneSpace is a Trademark of Comfort Products, Inc.
™
MODEL: 50-JN02 MADE IN CHINA
SAFETY AND MAINTENANCE
•
DO NOT stand on the desk. Do not use the desk as a stepladder.
•
•
Every 6 months, check all bolts and screws to ensure they are tight.
•
This product is California 93120 Compliant for Formaldehyde.
LIMITED WARRANTY
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This
warranty is made by Comfort Products only to the original end-user customer acquiring the product directly from
Comfort Products’ authorized dealers as shown by the original sales receipt. The end-user customer remedy pursuant
to this warranty is limited to repair or replacement of parts at Comfort Products’ option within a reasonable amount of
time. Comfort Products reserves the right to require damaged parts to be returned to Comfort Products upon request.
Consent from Comfort Products must be obtained before any warranty work is performed. This warranty applies under
conditions of normal use and is not subject to defects caused by improper assembly or disassembly; defects occurring
after purchase due to product modification, intentional damage, fire, misuse, negligence, or exposure to the elements;
labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary
damages. This Limited Warranty is NOT applicable to end-user customers who use Comfort Products for rental purpos-
es. This warranty applies only to end-user customers in the United States. All warranties are limited to the original
purchaser for normal use. The weight capacity of the laptop table is 22 pounds. For claims or questions concerning this
warranty, please visit www.comfortproducts.net or email us at [email protected]