ONV ONV-IPS33148PFM Series User manual

USER GUIDE
PoE & Optical Transmission
ONV-IPS33148PFM Series
PoE & Optical Transmission
Statement
Technical Structure and Port Description
Copyright @ 2002-2015 Optical Network Video Technologies (Shenzhen) Co., Ltd
All Rights Reserved
®
!
Packing List
Please kindly check the following items:
1 x Industrial PoE switch
Power Kits (Need to order it separately)
Mounting Kits
1x User Guide/ Certificates/Warranty Card
Note
If any shortage or damage found, please contact us in time.
This document contains proprietary information that is protected by copyright. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.
is the registered trademark of Optical Network Video Technologies (Shenzhen) Co., Ltd. The information
and product specifications within this document are subject to change at any time, without notice and without obli-
gation to notify any person of such change.
10/ 100 /10 00M bp s
G 11
G
12
G 13 G
14
IPS 3314 8PF- M Seri es IPS 3314 8PF- M Seri es
8 PoE+2GE +4G SFP Switch 8 PoE+2GE +4G SFP Switch
11
12
13
14
100 1000
10/ 100 /10 00M bp s
G 11
G
12
G 13 G
14
IPS 3314 8PF-M S eri es IPS 3314 8PF-M S eri es
8 PoE+2GE +4G SFP Switch 8 PoE+2GE +4G SFP Switch
11
12
13
14
100 1000
B
165 mm
45 mm
145 mm
A. PoE Por ts
B. Gigab it Rj45 Uplin k D. Reset
C. Gigab it SFP Uplink
E. Syste m Working In dicator
C
A
D
E
Product Overview
In short, this industrial PoE switch provide better manageability, security, QoS, and performance.
Product Introduction
ONV-IPS33148PFM /1000
and 802.3at(PoE+), 2x gigabit RJ45&SFP combo ports, and 4x gigabit SFP ports. This switch can offer power
over Ethernet to network weatherproof IP camera with wipers and heater, high performance wireless AP,
industrial VoIP phone or other PoE supported equipments, flexible for applications. SFP fiber optic port
transmission distance can be up to 120KM, with high resistance to electromagnetic interference. Besides,
it supports enhanced management through WEB, CLI, TELNET, SSH, SNMP.
series has 8x Rj45 Ethernet ports that compliant with 10/100 BaseT, 802.3af（PoE)
10-Port 10/100/1000Base-T + 4 (100M/1G) SFP L2 Plus Managed POE+ Switch
L2+ features provide better manageability, security, QoS, and performance
Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping,
LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.
Support spanning tree STP(802.1D) and RSTP(802.1W)
Jumbo frames support up to 9.6K kilobytes
Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.
Support cable diagnosis
Supports both IEEE 802.3af and 802.3at, and every port PoE configuration function
G.8032, support <50ms industrial quick ring protection
Note
Feature
!
The product ‘Sw itch’ m entio ned in th e manua l, if wit hout a sp ecial r eques t, it is referring to industrial ONV-IPS33148PFM PoE switch,
PoE switch in sho rt in bel ow.

Panel Description
Gigabit RJ45 Uplink
100M data transmission properly
Connection is OK and 100M data is being sent and recei ved
No data connected
Installation Guide
Application Connection Diagram Models Description
IPS33148PFM: Industrial managed PoE switch, support SNMP web manage protocol, ONV- 35mm rail-type installation.
8x 10/100/1000M Rj45 PoE ports+2x 10/100/1000M Rj45 ports+2x 100/1000M SFP ports, 8 PoE ports comply with both
IEEE 802.3af/IEEE 802.3at, auto-detect af/at devices. Max PoE port power is 30W. Rj45 ports transmission distance is 100
meters, transmission distance of optic fiber port with SFP module can be up to 2-120KM. Power adapter and SFP module
is not included in this package, please order separately.
1000M data transmission properly
Connection is OK and 1000M data is being sent and received
No data connected
10/100/ 1000Mb ps
G 11
G
12
G 13 G
14
IPS3314 8PF- M Seri es
IPS3314 8PF- M Seri es
8 PoE+2GE+4G SFP Switch
8 PoE+2GE+4G SFP Switch
11
12
13
14
100
1000
Po E Swi tc h
Po E Swi tc h
Indus t r i a l
Industrial
PoE Switch
IPS33148PFM
Wide Area Network
Cat.5
Cat.5
Cat.5
WAN
!
Please install to the supported devices.
Installation
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(1/2+、3/6-( End -span)/ 4/5+、7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table, or professional industrial installation rank mount.
2. Connect Positive, Minus and Earth terminals as indicators on the power adapter.
3. Connect the network devices to the POE switch port though network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1 Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the system
restoration is successful.
2 Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!Note
Indicator Status Description
Power Indicator: SYS
Green LED ON
Normal
PoE Indicator: PoE
Link Indicator: Link
Green LED OFF Power OFF
Green LED ON Connected PD device, working properly
Green LED Blink Short circuit or current overload
Green LED OFF No connected PD or power OFF
Yellow LED ON Data transmission properly
Yellow LED Blink Connection is OK and data is being sent and received
Yellow LED OFF No data connected
White LED ON
White LED Blink
White LED OFF
Data transmission properly
Connection is OK and data is being sent and received
No data connected
SFP Uplink Indicator
：Note Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.
!
output), plea se use AC110~24 5V, 50/60H z power s upply ;
Power In dustr ial Terminals: 48 (46 ~57V)VDC, dual redundancy ( More than 50VDC recom mende d when us ed PoE+
PoE Port : The Po E ports s upport PoE function, which can transmit data and power simultaneously if con necte d match ing
device. The LE D light s on the fr ont panel can show working status of each port.
Ethernet Port : Besid es PoE po rts, ot her por ts are no rmal se lf-sensing Ethernet RJ45 ports which support Auto MDI/MDIX, plug and play.
The LED lights on t he fron t panel c an show w orkin g statu s of each p ort.
Yellow LED ON
Yellow LED Blink
Yellow LED OFF
Green LED ON
Green LED Blink
Green LED OFF
www.onvcom.com
Tel:[phone] Fax:[phone] Email:[e-mail]
Address: Room 1003, Block D , Terra building , Chegongmiao, Futian district ,Shenzhen ,China
Factory address:No 5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China