ONV ONV-POE31108PF Series User manual

USER GUIDE
PoE & Optical Transmission
Statement
Copyright @ 2002-2017 Optical Network Video Technologies (Shenzhen) Co., Ltd
All Rights Reserved
Packing List
1 PoE switch
1 Power Cord / Adapter
1 Mounting Kit
1 User Guide
This document contains proprietary information that is protected by copyright. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.
The information and product specifications within this document are subject to change at any time, without notice
and without obligation to notify any person of such change.
Product overview
Product Introduction
Feature
The sieries PoE switch is featuring with 8* 10/100 Base T(X) PoE Ports (Compatible with IEEE802.3af/at), 2* Gigabit
Combo Ports or 2* Gigabit RJ45 Ports. Each port could supply power at 30W（Max）. PoE eliminates the need for
connecting these devices to power socket. So it make more flexible for those difficult to connect with AC power socket,
and cut down the installation cost. It is ideal choice for those want to deploy a small commercial network and home
network that use wireless access point (AP) and IP-based surveillance cameras.
Comply to IEEE802.3, IEEE802.3u, IEEE802.3af, IEEE802.3at standards;IEEE802.3ab, IEEE802.3z,
Support 10/100 or 10/100/1000M auto-sensing RJ45 ports
All ports support auto-flip (Auto MDI/MDIX);
Each PoE port can provide power up to 15.4W (af) or 30W (at);
Supply power for powered devices compatible with IEEE802.3af/at;
Support IEEE802.3x full duplex flow control and duplex backpressure flow control;
backplane bandwidth:5.6G(POE31108PF&POE31108P); 64G(POE31108PF)
MAC address:16K
Its 3.5KV network port surge protection can adapt to harsh outdoor environment;
Under the temperature of -20 ~ 55℃.
Technical Structure and Port Description
ONV-POE31108PF Sieries
A. PoE Power Port C. Combo ports (SFP/RJ45 )
B. Working Status LightPower D. 100-240VAC, 50/60Hz
A
BC
AC/IN 1 00- 240 V
D
A. PoE Power Port C. Up-link Gigabit Combo Port
B. Working Status LightPower D. 100-240VAC, 50/60Hz
8 Port 10 0M + 2 Port s Ether net 100 Mt Upli nk PoE Sw itch
1
2
3
4
5
6
7
8
9 10
AC/IN 1 00- 240 V
D
A
BC
8 Port 10 0M + 2 Port s Ether net 100 Mt Upli nk PoE Sw itch
1
2
3
4
5
6
7
8
9 10

!
Note：Please confirm that the all the PD devices are complying with IEEE802.3af standard.
PoE Priority: This function will protect the switch when it is overloaded, if all devices consumption are higher than specified, switch
ports will be sorted by priority, Port 1, Port 2, Port 3, etc. Then the power supply of lowest priority will be turned off.
Power Plug / Adapter: Please only use the included power supply as the switch may be damaged if mismatched power is applied.
PoE Port Indicator Lights: There are indicator lights on the front panel that will show you if the switch is supplying power to a PoE
capable device.
Network Traffic Indicator Lights: There are lights on the front panel that will show if your plugged in device is transmitting /
receiving network data at an appropriate rate.
Indicator description:
!
Installation guide
Please install with the supporting devices.
Installation
Please confirm the following things before installation:
1. If the POE ports meets the power requirement of the connecting devices.
2. If the POE standard requirements and power supply matches with the power receiving device
(1/2+3/6-( End -span))
3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table.
2. Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3.
Connect the network devices to the POE switch port with network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1 All lights will flash brightly except for the PoE ports, which means a successful power boot has occured.
2 Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!Note
Connection Diagram Model Descriptions and Installation
www.onvcom.com
Tel:[phone] Fax:[phone] Email:[e-mail]
Address: Room 1003, Block D , Tairan building , Chegongmiao, Futian district ,Shenzhen ,China
Factory address:No 4-5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China
Indicator Status Description
Power Indicator: PWR
Green LED ON
Normal
PoE Indicator: PoE
100/1000M Indicator:
Act/Link
OFF Power OFF
Green LED ON Connected PD, working properly
Green LED Blink Short circuit or current overload
OFF No Connected PD or Power OFF
Yellow LED Blink Data transmission properly
Yellow LED ON Network link is connected normally
OFF No connected network device
Green LED ON Connected with 1000Mbps network device
OFF Connected with 10/100Mbps network device
SPD Indicator: 1000M
PWR
LINK PoE
2
2
4
4
6
6
8
8
1
1
3
3
5
5
7
7
8-Port 10/100Mbps + 2-Port Gigabit TP/SFP Switch
Combo PoE
G2/TP
G2/TP
G2/SFP
G2/SFP
G1/TP
G1/TP
G1/S FP
G1/S FP
Link/Act
Speed
WAN
POE31108PFB
Power
Cat.5/5e/6
Cat.5/5e/6
ONV-POE31108PFB: 8x 10/100M ports +2* Gigabit Combo Ports PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 130W.
ONV-POE31108PFB-at: 8x 10/100M ports +2* Gigabit Combo Ports PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 250W.
ONV-POE31108PFM: 8x 10/100M ports +2* Gigabit Combo Ports managed PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 130W.
ONV-POE31108PFM-at: 8x 10/100M ports +2* Gigabit Combo Ports managed PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 250W.
ONV-POE31108P: 8x 10/100M ports +2x 10/100M Uplink port PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 130W.
ONV-POE31108P-at: 8x 10/100M ports +2x 10/100M Uplink port PoE switch, 1-8 port support PoE,
IEEE 802.3af/at, Max PoE power for each port ups to 30W, total power is 250W.