ONV IPS31108PF User manual

USER GUIDE
PoE & Optical Transmission
IPS31108PF Series

Statement
Copyright @ 2002-2013 Optical Network Video Technologies (Shenzhen) Co., Ltd
All Rights Reserved
®
!
Packing List
Please kindly check the following items:
1 xPoE switch
1 xPower Kits
1x Mounting Kits
1x User Guide/ Certificates/Warranty Card
Note
If any shortage or damage found, please contact us in time.
This document contains proprietary information that is protected by copyright. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.
is the registered trademark of Optical Network Video Technologies (Shenzhen) Co., Ltd. The information
and product specifications within this document are subject to change at any time, without notice and without obli-
gation to notify any person of such change.

Product overview
Product Introduction
Note
Feature
!
IPS31108PF series PoE switch features with 8x PoE Ethernet ports that compatible with 10/100BaseT(X),802.3af（PoE）
and 802.3at(PoE+) + 1x Gigabit combo Ethernet port and 1x Gigabit SFP fiber port. The power supply of single PoE port can
be up to 30W. The terminal equipment such as weather-proof IP camera, high performance wireless AP and industrial IP tele-
phony. Highly flexible, the transfer data can be up to 120Km from SFP fiber port to control centering. Capable of high anti-
electromagnetic interference.
Supports IGMP, VLAN, QoS, RMON, bandwidth management and port mirroring function. Specially designed for harsh outdoor applications.
Its 3KV network port surge protection can adapt to harsh outdoor environment and ensure the reliability of the uninterrupted PoE system.
The product ‘Switch’ mentioned in the manual, if without a special request, it is referring to industrial IPS31108PF PoE switch,
PoE switch in short in below.
Comply to IEEE 802.3,IEEE 802.3u,IEEE 802.3z,IEEE 802.3ab,IEEE 802.3x,IEEE 802.1D,IEEE 802.3at,IEEE 802.3af,IEEE 802.1Q
IEEE 802.1p,IEEE 802.1x,IEEE 802.1W,SNMP、IGMP standards;
10/ 100M, 10/ 100/ 1000M self-sensing RJ45 port, support power supply function;
All ports support auto-flip (Auto MDI/MDIX);
Each PoE port can provide power up to 15.4W (af) or 30W (at);
Supply power for powered devices compatible with IEEE802.3af/at;
Support IEEE802.3x full duplex flow control and duplex backpressure flow control;
8.8G backplane bandwidth, 2.75Mb forwarding memory;
4K MAC address table;
Its 3KV network port surge protection can adapt to harsh outdoor environment;
Under the temperature of -40 ~ 85 ˚ C, working at a full load 240W
The 2 gigabit SFP fiber ports are capable of high bandwidth and long distance transmission.

Technical Structure and Port Description
A. PoE Power Port
B. Up-link Gigabit Optical Multiplexing Port
C. Up-link Gigabit SFP Optical Port
D. Reset
E. System Working Status Light
F. Link Status Light
G. 100-240VAC, 50/60Hz
A.PoE Power Port
C.Up-link Gigabit
SFP Optical Port
E.System Working
Status Light
B.Up-link Gigabit Optical
Multiplexing Port
D.Reset
165 mm
45 mm
145 mm

：Note Please confirm that the all the PD devices are complying with IEEE802.3af/at standard.
!
output), please use AC110~245V, 50/60Hz power supply;
Power Industrial Terminals: 48 (46 ~57V)VDC, dual redundancy ( More than 50VDC recommended when used PoE+
Indicator description:
Indicator Status Description
Power Indicator: SYS
Green LED ON
Normal
PoE Indicator: PoE
100M Indicator: Link
OFF Power OFF
Green LED ON Connected PD Device, working properly
Green LED Blink Short circuit or current overload
OFF No Connected PD or Power OFF
Yellow LED Blink Data transmission properly
Yellow LED ON Connected with 10Mbps or 100Mbps network device
OFF No connected PD
Green LED Blink
Green LED ON
OFF
Data transmission properly
Connected with 1000Mbps network device
No connected PD
Gigabit Indicator: Link
PoE Port: The PoE ports support PoE function, which can transmit data and power simultaneously if connected matching
device. The LED lights on the front panel can show working status of each port.
Ethernet Port: beside PoE port, other ports are Ethernet RJ45 port, and all RJ45 port support Auto MDIMDIX, plug and
play.The LED lights on the front panel can show working status of each port.

!
Installation guide
Please install with the supporting devices.
Installation
Please confirm the following things before installation:
1. If the POE port meets the power requirement of the connecting devices.
2. If the POE standard requirement and power supply matches with the power receiving device
(1/2+、3/6-( End -span)/ 4/5+、7/8-(Mid-span))
3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch
Please install the POE switch according to the following steps:
1. Put the PoE switch on the surface of a large and stable table.
2. Plug the power adapter into the power connector, and then connect the power outlet through the power cord.
3. Connect the network devices to the POE switch port though network cable.
1.Please do not put heavy products on the POE switch, and please ensure good ventilation environment for the POE switch.
2.Please cut off the power first before plugging the power adapter.
Power
Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize,
and LED lights status will display as following:
1 Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the
estoration is successful.
2 Power LED remains lit.
If initialization is inconsistent with the above, please check the power.
Note
!Note

Connection Diagram
Industrial
PoE
Switch
IPS31108PF
Wide Area Ne twork

www.onvcom.com
Tel:[phone] Fax:[phone] Email:[e-mail]
Address: Room 1003, Block D , Terra building , Chegongmiao, Futian district ,Shenzhen ,China
Factory address:No 5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China
Model Descriptions and Installation
IPS31108P : 8x 10/100M ports +1x 10/100/1000M optical electrical combo port + 1x 10/100/1000M SFP optical port PoE switch,
1-8 port supports PoE, IEEE 802.3af, Each port power is 15.4W, the whole power is 120W, network port transmission distance is
100m, the SFP optical module transmission distance is 20-120Km.35mm rail-mounted design.
IPS31108PFM: 8x 10/100M ports +1x 10/100/1000M optical electrical combo port +1x 10/100/1000M SFP optical port smart
managed PoE switch, support SNMP network protocols, 1-8 port supports PoE function, IEEE 802.3af, each port power is 15.4W,
the whole power is 120W, network port transmission distance is 100m, and the SFP optical module transmission distance is 20-120 Km.
35mm rail-mounted design.
IPS31108PF-at: 8x 10/100M ports +1x 10/100/1000M optical electrical combo port +1x 10/100/1000M SFP optical port PoE switch,
1-8 port supports PoE, IEEE 802.3at, Each PoE port power can be up to 25.5W,the whole power is 240W, network port transmission
distance is 100m, the SFP optical module transmission distance is 20-120Km.35mm rail-mounted design.
IPS31108PFM-at: 8x 10/100M ports +1x 10/100/1000M optical electrical combo port +1x 10/100/1000M SFP optical port smart managed
PoE switch, support SNMP network protocols, 1-8 port supports PoE, IEEE 802.3at, Each PoE port power can be up to 25.5W,the whole
power is 240W, network port transmission distance is 100m, the SFP optical module transmission distance is 20-120Km.35mm rail-
mounted design.
F