Optos P200T User manual

optos.com
USER GUIDE
Korisnički vodič
Kullanım Kılavuzu
Οδηγός χρήστη
P200T
P200T plus
Optos Panoramic Ophthalmoscope

G102748/9GSE
WARNING
Before using this system:
The system should be used by trained professionals. Before using the system, please
read the operating instructions and safety recommendations in this user guide.
Failure to follow the instructions for use and safety recommendations provided in this user
guide can cause injury to the patient, to the operator, or to other persons.
CAUTION
In the United States of America, Federal law restricts this device to sale by or on the order
of a physician.
Page 2 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

Legal notice
Copyright 2017, Optos plc. All rights reserved.
Optos Plc. products are protected by patents and patent applications listed at www.optos.com/patents.
The information contained within this document is subject to change without notice. The latest version of this
information can be found at optos.com.
This document should be used in conjunction with the assistance information supplied in each application.
Instructions and service information can be obtained by contacting Optos, see Contact us on page59.
Optos does NOT provide, and the optomap plus guidelines do NOT constitute advice on making reimbursement
claims. Diagnostic tests should be ordered by the treating physician and this physician is responsible for
appropriate usage, adequate documentation and proper coding. It is the responsibility of the physician to
comply with reimbursement regulations, and check with the local insurance carrier for reimbursement
information and instructions. Optos does NOT accept any liability for reimbursement claims made while using
this device.
Copyright
This document may only be used for your personal, non-commercial use. This document and all its contents
(including without limitation, all text, formats, graphics and logos) are the property of Optos plc and are
protected from unauthorized copying and dissemination by the Copyright, Designs and Patents Act 1988 (as
amended), by various intellectual property laws and by international conventions.
Trademarks
Optos, optos, optomap, Daytona, Optos Daytona, California, Optos California, V2, ResMax, 3D Wrap and
P200 are ® Marks. All rights reserved.
WINDOWS is a Trademark of Microsoft Corporation.
ADOBE and ACROBATREADER are Trademarks of Adobe Systems Incorporated.
All other trademarks are the property of their respective owners.
Part Number: G102748/9GSE
Print Date: November 2017
0197
Manufacturer
Optos plc
Queensferry House
Carnegie Campus
Enterprise Way
Dunfermline, Fife
KY11 8GR
UK
Part Number: G102748/9GSE Page 3 of 65
Copyright 2017, Optos plc. All rights reserved. English

Page 4 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

Table of Contents
1 Warnings and cautions 11
1.1 General safety 11
1.2 Laser safety 13
1.3 Electrical safety 14
1.4 Environmental safety 15
1.5 EMC safety 15
1.6 Device failure 16
1.7 Cleaning guidelines 16
1.8 Maintaining information security 18
1.9 Data security 18
1.10 Software on Optos-supplied PCs 18
1.11 Symbol and label information 19
1.12 Country-specific warnings and cautions 20
1.12.1 Brazil 20
2 Introduction 21
2.1 Device description 21
2.2 Intended use 21
2.3 Intended users 22
2.4 Target environment 22
2.5 Contraindications 22
2.6 System configuration 22
2.6.1 System parts 23
2.6.2 Image modalities 23
2.6.3 System software 24
2.6.3.1 Understanding the admin software 24
2.6.3.2 Understanding the review software 25
2.6.3.3 Review application features 25
2.6.3.4 Understanding the storage software 26
2.6.4 Accessories and detachable parts 27
3 How to... 29
3.1 Get started 29
3.1.1 Switch on each day 29
3.1.1.1 Switch on the image server 29
Part Number: G102748/9GSE Page 5 of 65
Copyright 2017, Optos plc. All rights reserved. English

3.1.1.2 Switch on the scan head 29
3.1.1.3 Switch on browser-based review clients 30
3.1.2 Switch off at the end of each day 30
3.1.2.1 Shut down the scan head 31
3.1.2.2 Install software updates 31
3.1.2.3 Log off the image server each day 31
3.1.2.4 Restart the image server each week 31
3.1.3 Use the system 31
3.1.3.1 Using the touch screen 31
3.1.3.2 Using the touch screen keyboard 32
3.2 Capture images 32
3.2.1 Working with patient details 33
3.2.1.1 Working with Modality Work List (MWL) 34
3.2.2 How to prepare for image capture 34
3.2.3 How to align the patient 35
3.2.4 How to capture SLO images 35
3.2.5 How to capture eye steered images 36
3.2.5.1 How to change the eye piece 37
3.2.6 How to capture stereo images 37
3.2.7 What to do after the image is captured 37
3.3 Review images 38
3.3.1 Starting the review software 38
3.3.1.1 How to start the application 38
3.3.2 Reviewing patient images and scans 38
3.3.3 Exiting the review software 39
3.4 Manage the system 39
3.4.1 Managing user details 39
3.4.1.1 How to create user accounts for use on the scan head 39
3.4.1.2 How to create user accounts on the image server 39
3.4.1.3 How to change users 40
3.4.2 How to change the language on the scan head 40
3.4.3 How to change the language displayed in the review application 40
3.4.4 Storing and archiving images 40
3.4.4.1 Check storage status 40
Page 6 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

3.4.4.2 Schedule storage tasks 41
3.4.5 Managing connections 41
3.4.6 Managing the Modality Work List 41
3.4.7 Quality checks 42
3.4.7.1 Self-tests 42
3.4.7.2 Status indicator 42
3.4.7.3 Software update 42
3.4.8 Maintenance 42
3.4.8.1 Servicing 42
3.4.8.2 Warranty 43
3.4.8.3 Cleaning 43
3.4.8.4 Battery replacement 45
3.4.8.5 Cable management 46
3.4.9 Troubleshooting 46
3.4.9.1 Why can't Ilogin? 47
3.4.9.2 What information do I need when contacting Optos? 48
3.4.9.3 How do I image if the alignment system does not recognize the eye? 48
3.4.9.4 How do I restart the scan head? 48
3.4.9.5 How do I restart the image server? 48
3.4.9.6 What should I do if the PC drive on the image server is full? 49
4 Technical Specification 51
4.1 Safety designation (IEC 60601-1) 51
4.1.1 Scan head 51
4.1.2 Connections 52
4.1.3 Scan head dimensions 52
4.1.4 Review client properties 53
4.1.5 Touch screen properties 53
4.1.6 Table requirements 54
4.1.7 Battery 54
4.1.8 Environmental considerations (ambient) 54
4.2 Laser safety designation (IEC 60825-1) 55
4.2.1 External Laser warning information 55
4.2.2 Internal Laser warning information 55
4.2.3 Laser classification 55
Part Number: G102748/9GSE Page 7 of 65
Copyright 2017, Optos plc. All rights reserved. English

4.3 Electromagnetic compatibility (EMC) 55
4.3.1 Guidance and manufacturer declaration - electromagnetic emissions 56
4.3.2 Guidance and manufacturer declaration – electromagnetic immunity 56
4.3.3 Recommended separation distances 58
5 Contact us 59
5.1 Global Headquarters 59
5.2 Regional Offices 59
5.2.1 United States and Canada 59
5.2.2 Australia 60
5.2.3 Denmark 60
5.2.4 France 60
5.2.5 Germany and Austria 60
5.2.6 Norway 60
5.2.7 Spain 61
5.2.8 Sweden 61
5.2.9 Switzerland 61
5.2.10 United Kingdom and other European countries 61
5.3 Registration Holder 62
5.3.1 Brazil 62
Patient Alignment Guide 63
List of Tables
TABLE 1: List of parts 27
TABLE 2: List of status indicator lights 42
TABLE 3: List of problems and solutions 46
TABLE 4: Scan head safety designation details 51
TABLE 5: Scan head dimensions 53
TABLE 6: Review client properties 53
TABLE 7: Touch screen properties 53
TABLE 8: Table size requirements 54
TABLE 9: Environmental ranges 54
TABLE 10: List of electromagnetic emission compliance 56
TABLE 11: List of electromagnetic immunity compliance 56
TABLE 12: List of recommended separation distances 58
Page 8 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

List of Figures
FIGURE 1: P200T device connected to network (Daytona shown) 23
FIGURE 2: Example capture and review work flow 33
FIGURE 3: SLO capture workflow 36
FIGURE 4: Reviewing images workflow 38
FIGURE 5: Sample of the connection label 52
Part Number: G102748/9GSE Page 9 of 65
Copyright 2017, Optos plc. All rights reserved. English

Page 10 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

Chapter 1 - Warnings and cautions
1 Warnings and cautions
Your system is a medical device and must be operated within the safety parameters and instructions defined in
this User Guide.
If the device appears faulty or has non-functioning components, please contact your Optos representative, see
Contact us on page59.
If you have any questions regarding the correct use of your device, please contact your Optos representative
before attempting to operate the device.
Read the warnings and cautions before using your device.
If applicable, also read the country-specific warnings and cautions, see Country-specific warnings and cautions
on page20.
1.1 General safety
WARNING
Guidance for use on patients with Epilepsy
The device uses flashes of light. Some patients with epilepsy may be sensitive to flashes
of light. Caution should be exercised for patients who have a history of reaction to camera
flashes or strobe lighting.
Equipment modifications
No modification of this equipment is allowed.
Positioning scan head on table
The scan head should be positioned in the middle of the table width. The front of the scan
head should be inline with the front of the table to allow the patient to get into the correct
alignment position.
Suitability of images
The suitability of using an image or print for viewing is determined by the clinician.
Part Number: G102748/9GSE Page 11 of 65
Copyright 2017, Optos plc. All rights reserved. English

Chapter 1 - Warnings and cautions
CAUTION
Day to day use - operators
The protection provided by the equipment may be impaired if the equipment is used in a
manner NOT specified by Optos.
The use of this device or any other device which uses light for ocular examination should
NOT be prolonged unnecessarily.
Do NOT place any optical elements, with the exception of the patient wearing contact
lenses, between the device and the patient’s eye.
Do NOT use lint cloths, tissues, or other materials that may create dust, on or near the
scan head. Always allow cleaned areas to air-dry.
The device requires low levels of room light to operate efficiently. Take care to avoid
accidents when working under low light conditions.
Only use the fabric cover when the scan head is powered OFF. Remove the fabric cover
before operating the scan head.
You should not schedule archiving tasks if CDs or DVDs are used.
CAUTION
Day to day use - patients
Patients MUST NOT operate this device.
The patient should not touch the touch screen. The patient should only be in contact with
the face pad, eye piece and hand grips.
Do NOT capture images when the eye piece is NOT in place.
Do NOT lean on the table.
The face pad may get warm during use.
CAUTION
Measurements
After you have drawn the points on the image, the software can estimate the relative
distance between any two points. The calculated distance is an estimate only and may be
used to indicate a need for further review. The measurements of relative distance,
however, should not be used as an indication of a specific condition or disease. The size
and shape of an image depends on the type of device used to capture it. Images from
different types of device should not be compared.
Measurements in third party viewers may not be accurate.
Page 12 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

Chapter 1 - Warnings and cautions
CAUTION
Installation and maintenance
Your device will be installed by Optos trained personnel. Do NOT operate the device until
they have completed the installation and training.
Your Optos representative will configure the settings when the device is installed. These
settings should NOT be changed in the course of normal operation.
Please consult your Optos representative before changing the settings.
Do NOT remove the scan head covers. Only Optos trained technical personnel are
permitted to service the device.
The scan head weighs 28 kg (62 lbs). This requires two people to lift or carry the unit.
You should be aware of your contractual obligations before disposing of any equipment.
Only Optos trained personnel are permitted to install and service the device.
Do NOT service the device when imaging a patient.
1.2 Laser safety
WARNING
Danger of laser injury
While no acute optical radiation hazards have been identified for direct or indirect
ophthalmoscopes, some patients may be less tolerant to an exposure of light. This may
be the case for infants, aphakic patients and persons with diseased eyes. Patients who
have had any exposure with the same device or with any other ophthalmic device using a
visible light source within the previous 24 hours may also be less tolerant to a further
exam using light.
CAUTION
The Laser Management System maintains a Class 1 accessible emission limit (AEL) at
the eye for normal operation and under foreseeable fault conditions.
While the scan head covers are fitted the risks are minimized. Images may only be
captured when the scanning system is within safe operating conditions. The following
items are monitored by the Laser Radiation Management System:
lInternal power monitoring prevents excess power at the eye.
lAn internal shutter and associated controls prevent early or prolonged laser
exposure.
Using the controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
All P200T product variants are Class 1 laser devices at the eye, and comply with IEC/EN
60825-1:2007 and 21 CFR1040.10 and 1040.11 except for deviation pursuant to Laser
Notice 50, dated June 24, 2007.
Based on current scientific knowledge, a Class 1 laser device can be considered as safe
by engineering design, and safe under reasonably foreseeable conditions of operation.
The patient may experience some discomfort from exposure to light. It should be noted
that the benefits of an eye exam outweigh any discomfort.
Part Number: G102748/9GSE Page 13 of 65
Copyright 2017, Optos plc. All rights reserved. English

Chapter 1 - Warnings and cautions
1.3 Electrical safety
WARNING
Equipment classification
Electrical Shock Protection - Class 1 Equipment
Type B - relates to the allowable maximum leakage current which can flow from the
applied part. The limits for this are defined in IEC/EN 60601.
The applied parts are the face pad, eye piece and hand grips.
Medical device. Continuous operation.
Do NOT open the scan head covers. There are no user serviceable or replaceable parts
inside.
DoNOT plug the scan head into a power block or powered table. The scan head must be
plugged directly into a wall socket.
Do NOT disconnect or connect the touch screen while the scan head is in use.
To prevent electric shock:
lOnly use cables supplied by Optos.
lCables should NOT be extended or altered.
lMains supply must be earthed.
lThe device may only be serviced by Optos trained personnel.
lCare must be taken never to touch exposed parts of the device while in physical
contact with a patient.
If the mains cable is damaged do not use the system and contact your Optos
representative, see Contact us on page59.
The image server, switch, browser-based review clients and any Viewing PCs or monitors
must be positioned outside the patient environment; more than 1.5 meters (5 ft) from the
scan head.
Do NOT connect any peripherals to the scan head. Only use peripherals supplied with the
device. Independently sourced peripherals may NOT be compatible. Contact your Optos
representative for more information on compatible peripherals, see Contact us on page59.
CAUTION
Ordinary equipment (IP2X), without protection against ingress of water.
You must regularly inspect the equipment. If there is any damage please contact your
Optos representative, see Contact us on page59.
Ensure the mains socket is easily accessible.
Page 14 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

Chapter 1 - Warnings and cautions
1.4 Environmental safety
WARNING
Do NOT operate the device:
lIn the presence of explosive or flammable gases, flammable anaesthetic
mixtures or in oxygen rich environments.
lInside the influence of the magnetic field of a magnetic resonance imaging
device.
lIn environments that block the scan head air intake vents.
lIn environments that exceed the environmental limits, see Environmental
considerations (ambient) on page54.
1.5 EMC safety
CAUTION
In order to provide reasonable interference protection against radio communication
services, this device has been tested and complies with 47 CFR Part 15, Sub Part B of
the FCC (U.S.A.) rules and EN 60601-1-2 standard requirements at the premises of a
typical user, and the CISPR11 standard emission limits (CISPR11 Group 1 Class B),
Guidance and manufacturer declaration - electromagnetic emissions on page56.
Although compliant with all applicable international EMC standards, the equipment
generates, uses and can radiate radio frequency energy. The equipment may cause radio
frequency interference to other medical and non-medical devices and radio
communications nearby.
There is no guarantee that interference will NOT occur in a particular installation.
If this device is found to cause interference (which may be determined by turning the
equipment ON and OFF), the user or qualified service personnel should attempt to correct
the problem by one or more of the following measures:
lRelocate the affected device or devices
lIncrease the separation between the equipment and the affected device
lConsult the Optos service representative for further suggestions
Part Number: G102748/9GSE Page 15 of 65
Copyright 2017, Optos plc. All rights reserved. English

Chapter 1 - Warnings and cautions
CAUTION
Unauthorized changes or modifications will invalidate the warranty of this device.
The manufacturer is NOT responsible for any interference caused by using:
lInterconnect cables NOT supplied by Optos
lUnauthorized changes or modifications to this equipment
Do NOT use devices which intentionally transmit RF signals (cellular phones, transceivers
or radio controlled devices) in the vicinity of this equipment, as it may cause performance
outside the published specifications, see Recommended separation distances on
page58.
Adhering to the distance separation recommended will reduce the disturbances recorded
at the image level, but may NOT eliminate all disturbances, see Recommended separation
distances on page58. However, when installed and operated as specified herein the
system will maintain its essential performance by continuing to acquire, display and store
diagnostic quality images safely.
It is recommended that the image server is not used adjacent to or stacked with other
equipment.
The use of accessories and cables other than those specified may result in degraded
electromagnetic compatibility of the system.
1.6 Device failure
WARNING
In the unlikely event you hear a loud noise from the device, see smoke or smell burning,
stop imaging and isolate the device by unplugging.
If you suspect the device may be faulty see Troubleshooting on page46.
If the fault still persists, please contact your Optos representative, see Contact us on
page59.
CAUTION
Ensure the mains socket is easily accessible.
1.7 Cleaning guidelines
The device cleaning instructions are detailed in Cleaning on page43. Adhere to the following cautions while
cleaning the device.
CAUTION
Cleaning patient contact parts
In order to prevent any contamination always clean and disinfect parts of the equipment
which will be in contact with the patient, see Cleaning before each patient on page44.
Adequate cleaning and disinfection is necessary to prevent disease transmission.
Thoroughly clean and disinfect the equipment surfaces that contact the patient and all
equipment surfaces likely to become soiled during use.
Do NOT attempt to wash or immerse the patient contact parts (for example, face pad, eye
piece and hand grips) in water or cleaning fluid.
Page 16 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

Chapter 1 - Warnings and cautions
CAUTION
Cleaning the main mirror
The mirror can be damaged during cleaning. Preventing mirror contamination reduces the
risk of damaging the mirror. It is NOT recommended to routinely clean the main mirror.
Only clean the mirror if dust particles, smudges or spots have accumulated on its surface.
When cleaning the main mirror, do NOT rub the spots too hard, as this may cause damage.
Do NOT touch the edges of the main mirror. The edges of the main mirror are sharp.
Only clean visible areas of the main mirror. Do NOT put your hand or any cleaning material
into parts of the device you cannot see.
Do NOT polish the mirror surfaces; clean only dust particles, smudges or spots.
Do NOT wear jewelry (for example rings, watches or bracelets) while cleaning the mirror
surface as this may damage the mirror.
Dispose of the dirty cloth after each wipe to avoid transferring the dust back on to the
mirror. You will have to use several wipes to clean the mirror.
CAUTION
Cleaning materials
Wear powder-free gloves at all times when cleaning the device including the scan head
and main mirror. If the gloves become contaminated they must be replaced immediately.
Do NOT use lint cloths, tissues, or other materials that may create dust, on or near the
scan head. Always allow cleaned areas to air-dry.
Improper cleaning methods or use of inappropriate cleaning and disinfecting agents can
result in the following:
lDamaged equipment
lPoor imaging performance
lIncreased risk of electric shock
Always follow the cleaning and disinfecting agents’ manufacturer’s instructions and
precautions; for storage, method of application, protective gloves, shelf life and disposal
to help assure effective and safe use of the product.
Be careful NOT to damage the scan head covers when cleaning.
Do NOT use harsh detergent, abrasive cleaners or solvents that are NOT recommended by
the manufacturer.
Do NOT expose equipment parts to steam or sterilizers as this will damage the device.
Do NOT allow liquids to get into the equipment.
If you believe cleaning sprays or liquids have got into the equipment, disconnect the
power supply and have the equipment checked by Optos qualified service personnel.
Do NOT let the cleaning wipes come into contact with the inside of the instrument.
Do NOT use the equipment until you have confirmed it is safe to use.
Part Number: G102748/9GSE Page 17 of 65
Copyright 2017, Optos plc. All rights reserved. English

Chapter 1 - Warnings and cautions
1.8 Maintaining information security
CAUTION
The scan head and image server should be kept in a secure location. You are responsibile
for maintaining the security of information stored on the scan head and image server.
You are responsible for the security of user accounts and the maintenance of password
security.
1.9 Data security
CAUTION
Your System Administrator is responsible for backing up the image server. Backups
MUST be verified regularly to avoid patient data loss.
Only allow authorized personnel to access the data. Changes to data may lead to
incorrect diagnosis.
Implement measures to protect personal patient data from misuse.
If a critical error occurs during capture you should review the saved images and scans,
and recapture scans and images if necessary.
Exit OptosAdvance before turning OFF the image server.
If you are using Vantage applications, exit the Vantage applications before turning OFF the
image server.
You can install critical Windows Updates and antivirus signatures on the Image Server
PC and Viewing PCs by following the instructions displayed during the update.
1.10 Software on Optos-supplied PCs
CAUTION
Only install software when supplied and instructed by Optos.
Installing new software
Contact Optos Customer Support if you need to install other software, see Contact us on
page59.
Updating existing software
Your System Administrator should carry out software upgrades using the software and
instructions provided by Optos.
Do NOT accept software updates when you are about to image a patient.
Page 18 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.

Chapter 1 - Warnings and cautions
1.11 Symbol and label information
Symbol and label information
Switch - OFF position.
Switch - ON position.
Protective earth terminal.
Danger: high voltage warning.
WARNING
Warnings are directions which, if NOT followed, could cause:
lFatal or serious injury to a user, engineer, patient or any other person.
lDamage to the equipment described in this manual and/or other equipment or goods.
lEnvironmental pollution.
CAUTION
Cautions are directions which, if NOT followed, could cause:
lA hazardous situation for a user, engineer, patient or any other person.
lDamage to the equipment or loss of data.
Interference may occur in the vicinity of equipment marked with this symbol.
Laser device present. This symbol is used internally. Only Optos trained personnel are
permitted to service the device. Under normal use, operators should never see this symbol.
Date of manufacture.
Manufacturer.
Type B - relates to the allowable maximum current leakage which can flow from the applied
part. The limits for this are defined in IEC 60601.
SN
Serial Number.
0197
In accordance with Directive 93/42/EEC.
Consult accompanying documents.
Disposal in compliance with WEEE Directive.
Part Number: G102748/9GSE Page 19 of 65
Copyright 2017, Optos plc. All rights reserved. English

Chapter 1 - Warnings and cautions
1.12 Country-specific warnings and cautions
Some countries have specific regulatory requirements. To ensure compliance read the warnings and cautions
specific to the country where the device is located and will be used.
1.12.1 Brazil
Disposal in accordance RDC 306/2004.
Page 20 of 65 Part Number: G102748/9GSE
English Copyright 2017, Optos plc. All rights reserved.