Orbital Systems OAS Standart R3 User manual

Technology Installation
Orbital Shower Panel R3
5-06-0012
Publication date 2021-08-27

Copyright © 2021,Orbital Systems
All rights reserved. No part of this document may be reproduced or copied in any form or by any means without written
permission from Orbital Systems. The English language version of this document contains the original instructions. All other
language versions are translations of the original instructions.

Table of Contents
Prerequisites and Approvals ............................................................................................................ 5
Warranty ................................................................................................................................... 6
Service ............................................................................................................................. 6
Install Orbital Shower Unit ............................................................................................................... 7
Install Sensor Hose, Flush Hose and Recirculation Hose ................................................................... 7
Install Sensor Tank Dock ........................................................................................................ 8
Install Sensor Tank and Sensor Tank Lock .................................................................................... 8
Install Funnel .................................................................................................................... 10
Install Orbital Shower Core .................................................................................................... 10
Install Hose Connections ...................................................................................................... 13
Install Panel ..................................................................................................................... 14
Install Control Dial .............................................................................................................. 14
Install Panel Lock ............................................................................................................... 17
Next Step ........................................................................................................................ 20
Installing the Shower Head ............................................................................................................ 22
Installing the 3rd Party Shower Head ................................................................................................ 24
Installing the Hand Shower ............................................................................................................ 25
Installing the Diverter and Hand Shower ..................................................................................... 25
Installing the Hand Shower Holder ................................................................................... 28
Shower Activation, Wi-Fi Setup and Installation test ............................................................................... 31
Page 3 of 33

This page is intentionally left blank.
Page 4 of 33

Prerequisites and Approvals
Orbital Shower is designed and type approved according to
the Swedish requirements in Swedish National Board of
Housing and Building & Planning regulations (BBR). The
system is type approved according to RiSE (Research
Institutes of Sweden AB) with Type Approval Certificate
C900373 & C900374. Orbital Shower is CE-marked based
on test reports from third party labs.
If industry regulations and instructions in this manual are
followed, Orbital Systems guarantees a functional shower
system.
Page 5 of 33

Warranty
The Orbital Shower and its components are
manufactured from high-quality materials and
assembled under strict standards.
Orbital Systems warranty covers defects which appear within
a period of 2 years from delivery of the product or as long as
the extended warranty period bought or included in the
purchase.
Orbital Systems warranty does not cover:
•Defects arising out of materials or a design specified by the
Customer, or by any alterations carried out without our
consent.
•Defects that appear under conditions of operation not
provided for and under improper use of the product.
•Defects caused by faulty or non-occurring maintenance,
incorrect installation or a faulty repair.
For showers outside of the warranty period spare parts are
available for purchase directly from Orbital Systems.
Service
Orbital Systems and our team of expert staff are available to
assist you if you require product advice, experience any
problems, need to purchase spare parts or to set up a
service appointment.
Repairs should only be carried out by Orbital Systems.
Contact us
•[email protected]
•www.orbital-systems.com
•Europe: [phone]
Page 6 of 33

Install Orbital Shower Unit
Component Overview
1
11
12
3
2
7
4
5
8
9
10
6
13
14
15
16
1. Hose Connection (RSK 188 24 82)
2. Orbital Shower Core
3. Panel
4. Panel Latch Kit
5. Funnel
6. Sensor Tank
7. Control Dial
8. Sensor Cable
9. Recirculation Hose
10. Flush Hose
11. Filter Capsule
12. Cleaning Tablet
13. Clip
14. Sensor Tank Dock
15. Sensor Tank Lock
16. Spring Lock
Install Sensor Hose, Flush Hose and
Recirculation Hose
8 9
10
1. Install Sensor Cable, Flush Hose and Recirculation
Hose. Make sure the Sensor Cable goes first.
2. Pull the Sensor Cable out to where the contact almost
reaches the end of the Sensor Tank.
Page 7 of 33

Install Sensor Tank Dock
14
16 13
1. NOTICE
Apply lubricant according to local
regulations or best practice. Make sure
that the o-rings are lubricated.
Connect Hoses to Sensor Tank Dock.
2. Lock Hoses by inserting Clip.
3. Insert Sensor Tank Dock into Connection Pipe. Push it
all the way in.
4. Lock Sensor Tank Dock in place with the Spring Lock.
Install Sensor Tank and Sensor Tank Lock
615
Page 8 of 33

1. Connect the Sensor Cable to the Sensor Tank.
CAUTION
Make sure to have correct alignment
between key and slot in connectors by
aligning the two white lines.
2. Insert Sensor Tank.
3. Lock the Sensor Tank in position with the Sensor Tank
Lock by turning it 90 degrees.
CAUTION
Make sure Sensor Tank is inserted
correctly. The edge of the Sensor Tank
should be fully pushed towards and in
level with the edge of the Drain Unit.
Page 9 of 33

Install Funnel
5
NOTICE
Place the Funnel with the hole oriented to the
left! Placing the hole oriented to the right will
disable recirculation.
Install Orbital Shower Core
2
1. Remove Transport Plugs before installation.
Page 10 of 33

2. Insert Orbital Shower Core into the Wallbox and attach
Safety Wire. Keep tilted to enable electrical installation.
CAUTION
Heavy equipment. The Orbital Shower
Core weighs approx. 25 kg.
CAUTION
Make sure to attach the Safety Wire
before tilting the Orbital Shower Core.
CAUTION
Make sure Hoses and Cables are not
pinched or kinked.
3. WARNING
Electrical installation should be
performed according to local regulations
by a licensed electrician.
4.
Page 11 of 33

5.
x1
M8 socket head
6. CAUTION
Make sure to have correct alignment
between key and slot in connectors.
Make sure locking ring snaps and
connector is locked.
Page 12 of 33

Install Hose Connections
1RSK 188 24 82
Provided by Customer:
•Hose Connections, x2
1.
2. CAUTION
Install Hose Connections according to
local regulations and adaptations.
Page 13 of 33

3.
Install Panel
3
x8
M3 (5.5mm driver)
Install Control Dial
7
Page 14 of 33

1. Position the Control Dial according to the “up marking”
before assembly.
2. CAUTION
Risk of damage to Panel if
overtightening.
x4
Plastite screw (12 mm)
Page 15 of 33

3.
4. CAUTION
Make sure to have correct alignment
between key and slot in connectors.
Make sure locking ring snaps and
connector is locked.
5. Adjust Panel angle.
Page 16 of 33

6. Adjust
x4
M3 (5.5 mm driver)
Secure
Install Panel Lock
4
1. NOTICE
Clean surface before attaching Bracket.
Page 17 of 33

2. Adjust until edge aligned to edge.
Adjust until edge aligned with magnet.
3.
Page 18 of 33

4. 5.
Adjust Panel depth.
Page 19 of 33

6. Set into locked position.
Next Step
11
CAUTION
The Orbital Shower will not function without
executing following steps.
Filter Capsule has to be installed before starting the Orbital
Shower. See User Guide for details.
Page 20 of 33