Orbital Systems Oas User manual

Oas Indo Shower Unit Installation Oas Indo EU 190528

2
(56)
Introduction & Safety Messages
This manual applies to model OS8732 Ei2.

3
(56)
Introduction & Safety Messages
Thank you for purchasing the Oas shower system. To
enjoy the full potential of the shower please read and
follow the procedures in this manual. Make sure that
you fully understand how to operate this shower and
make sure that it is properly maintained in accordance
with the instructions given in this manual. Do not throw
this manual away, keep it handy for future reference.

4
(56)
Read and follow these instructions carefully
before installing, using, servicing or otherwise
handling the Oas shower system.
WARNING
The Oas shower system can be used by children
aged 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge only if
they have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved.
Children should be supervised to make sure they
do not play with the shower system.
Caution risk of personal injury - the shower has
a temperature barrier lock at 38 degrees Celsius
which can be removed manually but may lead to
scalding and risk of injury.
Never permit or operate electrically connected
devices in or within 15 cm of the shower system.
Cleaning and user maintenance shall not be completed
by children.
Do not operate the shower system if water leaks from
the appliance.
Do not operate the shower system if it is frozen or
suspected of being frozen.
Unauthorized modification of internal components and
wiring is prohibited.
Do not operate the shower system if you notice any
of the following - contact us using the details in the
service section of this manual:
• If the Indo cosmetic cover is not correctly fitted
• If the shower system is damaged
• If the shower system shows signs that it
requires maintenance or a filter change
Do not use attachments or parts not recommended by
Orbital Systems or our certified partners.
Introduction & Safety Messages
SAFETY INSTRUCTIONS

5
(56)
SAFETY INSTRUCTIONS
Introduction & Safety Messages
The Oas recirculating shower system is designed for regular
showering only. Do not use the shower to clean extreme soiling or
pour corrosive chemicals or cleaners down the shower drain. Any
other use of the system could seriously deteriorate the quality of
the filtration system or damage the shower system.
Do not drink the shower water. The system has several functions
for cleaning the water as well as intelligent hygiene operation
modes, but drinking water quality cannot be guaranteed.
To reduce the risk of contracting a waterborne illness, you should
always follow the cleaning and maintenance procedures in this
manual.
We cannot provide a 100% guarantee against the risk of infection
from pathogens shed by a user during a shower session.
This system is certified by IAPMO
R&T to NSF 55, Class B

6
(56)
SAFETY INSTRUCTIONS
Introduction & Safety Messages
These instructions are provided to advise the
best practice for the installation. All installations
should be completed by Orbital Systems or
a certified partner or client. To ensure your
installation goes smoothly read this manual
before you begin and follow each step. Video
materials are available to supplement the
installation manual at www.orbital-systems.com.
Ensure that the installation environment meets
all the specified installation requirements in this
manual (prerequisites for installation).
Installations must conform to local plumbing
codes and regulations.
All electrical installations must conform to local
regulations and be performed by a licensed
electrician.
All plumbing installations must conform to local
regulations and be performed by a licensed
plumber.
This is an earthed appliance, the connection to the
earth circuit is mandatory.
The appliance shall be supplied through a
class A GFCI (ground fault circuit interrupter).
The appliance shall be supplied by a switch that
provide a full disconnection under overvoltage
category III incorporated in the fixed wiring plant.
The appliance is designed for a fixed connection
to the water mains. Do not use a detachable water
pipe or tube.
Unauthorized modification of internal components
and wiring is prohibited.
If the supply cable is damaged it must be replaced
only by the service assistance or person with
similar qualification.

7
(56)
Introduction & Safety Messages
WARRANTY
The Oas shower and its components are manufactured from high-quality
materials and assembled under strict standards.
Orbital Systems warranty covers defects which appear within a period of 5
years from delivery of the product or prior to the consumption of 500,000
litres of water by use of the product, whichever of the two is the sooner.
Orbital Systems warranty does not cover:
• Defects arising out of materials or a design specified by the Client, or by any
alterations carried out without our consent.
• Defects that appear under conditions of operation not provided for and
under improper use of the product.
• Defects caused by faulty maintenance, incorrect installation or a faulty repair.
Repairs should be carried out only by Orbital Systems, one of our certified
service partners or the client only when certified.
For showers outside of the warranty period spare parts are available for
purchase directly from Orbital Systems or through one of our certified partners.

8
(56)
Service
Contact us
[e-mail]
www.orbital-systems.com
Europe CET: [phone]
North America PST: +(415)-845-8775
Orbital Systems and our team of expert sta including our
certified Service Partners are available to assist you should
you require product advice, experience any problems, need
to purchase spare parts or to set up a service visit.
We recommend your first point of contact should be your
installer, who will be able to oer all of the above services.
Alternatively you can also contact Orbital Systems who will
be able to assist you. Repairs should always be carried out
only by Orbital Systems or a certified partner.
SERVICE

9
(56)
TABLE OF CONTENTS
Installing the Shower Unit 10
Installing the Shower Head 46
WiFi Setup & Track your Savings 53
Installing the Hand Shower 54

10
(56)
INSTALLING THE SHOWER UNIT
watch video: https://bit.ly/2QNFVLP

11
(56)
COMPONENT OVERVIEW
Installing the Shower Unit
1
2
14
15
16
17
3
18
13
4
5
6
12
7
8
9
10
11
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Hose Connection
Indo Core
Indo Panel
Panel Lock + Magnetic Key
Funnel
Smart Sensor Unit
Sensor Tank
Sensor Cable
Recirculation Hose
Flush Hose
Smart Sensor Lock
+ half thread M4 (3 Hex), x1
+ full thread M4 (3 Hex), x1
WiFi Cable and Antenna
Air Gap Tank
Quartz Glass
UV Lamp
Filter Capsule
Descaling tablet
Control Dial
Installing the Shower Unit

12
(56)
Installing the Shower Unit
Remove Panel Template.
x8
M3 (5.5mm driver)

13
(56)
Installing the Shower Unit

14
(56)
270 mm
Installing the Shower Unit

15
(56)
Installing the Shower Unit
Apply lubricant

16
(56)
Installing the Shower Unit
x1
Half thread M4 (3 Hex)
If Tube Lock is misaligned
it can cause issues in
further installation steps.

17
(56)
Installing the Shower Unit
x1
Full thread M4 (3 Hex)

18
(56)
Installing the Shower Unit
Tighten with pliers to
secure water tightness.

19
(56)
Installing the Shower Unit

20
(56)
Make sure Smart Sensor Unit
is inserted correctly. The O-ring
should not be visible.
Installing the Shower Unit