OrienTek TOC-125 User manual
TOC-125 Optical Fiber Cleaning Pen Instructions
Identification of remaining cloth
Connector plugs alone
External function description
Connector inside adaptor
noitcnuF
emaNtraP.oN
A.ecafdneretcennoclacitpoehtothtolcgninaelcehtdaeL
piT
BNozzle Lead tipto the opticalconnecter end face.
Push the button to extend and contract the nozzle.
Push the outer shell to clean the connector.
Acts as dust cap or cleaning adapter for connector plug.
Provides indication of remaining cleaning cloth.
CLock Button
DOuter Shell
EGuide Cap
FIndicator
A. Tip
B. Nozzle
D. Outer Shell
C. Lock Button
F. IndicatorE. Guide Cap
Standard Mode Extended Mode
Pull Nozzle while
pushing button.
Pull Nozzle
Push Lock Button
Slide
2. Insert tip of cleaner into MU/LC Adaptor
Standard ModeExtended Mode
MU or LC Adaptor
Note: This drawing shows only LC, but this product can clean MU too.
3. Push the Outer Shell to start cleaning the
MU/LC connector end face. A “click” sound
indicates end of cleaning process. Close the
cover after use.
Be careful not to slant the Cleaner MU/LC while inserting into
the adapter.
Do not overly exert force during insertion as this may
cause damage to both the connector and the Cleaner MU/LC.
If pushing Outer Shell is inhibited, remove Cleaner MU/LC
from adapter and
ensure that there is no sizeable debris inhibiting the
cleaning process.
CLICK !!
1. Remove Guide Cap from the device
Guide Cap
1. Open the Cover on the Guide Cap
Guide Cap
Cover
2. Insert MU/LC connector into the Guide Cap
MU or LC Plug
3. Push the Outer Shell to start cleaning the
MU/LC connector endface. A “click” sound
indicates end of cleaning process. Close the
Be careful not to slant MU/LC connector while
inserting into the Guide cap.
Do not overly exert force during insertion as this may
cause damage to both the connector and the Cleaner MU/LC.
If pushing Outer Shell is inhibited, remove Cleaner MU/LC from
adapter and ensure that there is no sizeable debris inhibiting the
cleaning process.
CLICK !!
Push straight.
cover after use.
多
少
無
(White)
Cloth
Red
Red
Tip (Black)
Cloth (White)
No Cloth
(Black)
(White)
Cloth
Tip (Black)
View of Indicator View of the Nozzle end
Full
Little
Empty
Standard configuration
Contact us
NANJING ORIENTEK OPTICAL COMMUNICATION LTD
Mail: [email protected]
Add: Jianshan Industry Park, Liuhe District, Nanjing, Jiangsu, China
Web: www.orientekot.com
Product description
Tips
TEL: +86 17312230635
Products features
Product parameter
Please read all instructions and warnings before
using this product. Irregular use will cause.It will
damage the product or personal safety.
Operating environment altitude:
areas below 2000m above sea level
Use environment
TOC-125 optical fiber cleaning pen, it replaces the traditional
cotton swab + alcohol, it can remove the oil and dust on the
fiber connector ferrule/device/module with a simple touch of
the cleaning pen when using it, and it can be used continuously
and guaranteed effective cleaning effect. Widely used in optical
network maintainers, engineering companies or equipment
manufacturers, device manufacturers, the advent of the optical
fiber cleaning pen easily solves the problem of cleaning the
core of the optical fiber adapter!
One-click optical fiber connector cleaner
Suitable for 1.25mm LC/MU (APC & UPC)
More than 800 cleaning times
Effectively remove all kinds of oil and dust
To avoid contamination of the cleaning pen,
it is equipped with a dust cap
Product
Material
Cleaning ability
Length
Cleaning times
Scope of
application
TOC-125
Resin
Effective cleaning up to 99%
More than 800 times
175*18*18mm
LC/MU(APC/UPC) 1.25mm
Optical fiber connector (male and female)
1）Do not attempt to disassemble as this can
cause damage to the device.
2）Do not re-use cleaning cloth as this will eliminate
its cleaning ability.
3）Do not touch the cleaning cloth as this will
cause contamination.
4）Do not pull the cleaning cloth, use only the
device body.
6）Do not expose device to direct sunlight, high
temperature or high humidity.
5）Do not use this cleaner when the cloth is empty,
as this can cause damage to the connector.
7）The cover on the guide cap should be closed
at all times when device is not in use.
Packaging carton, cleaner, certificate
