ORiNG IDS-5042 Series User manual

Industrial Device Server User’s Manual
IDS-5042 Series
Version 1.00
Aug 2010.
ORing Industrial Networking Corp.
4F., NO.3, Lane235, Baociao Rd.Sindian City,
Taipei County 23145 Taiwan, R.O.C.
Tel: + 886 2 2918 3036
Fax: + 886 2 2918 3084
Website : www.oring-networking.com
E-mail : [e-mail]

Table of Content
GETTING TO KNOW YOUR DEVICE SERVER...........................................................................................1
1.1 About the IDS-5042 Serial Device Server.................................................................................... 1
1.2 Software Features...................................................................................................................... 1
1.3 Hardware Features.....................................................................................................................2
HARDWARE INSTALLATION ..................................................................................................................3
2.1 Install IDS-5042 on DIN-Rail.......................................................................................................3
2.1.1 Mount IDS-5042 on DIN-Rail...............................................................................................................3
2.2 Wall Mounting Installation ...........................................................................................................4
2.2.1 Mount IDS-5042 on wall......................................................................................................................5
HARDWARE OVERVIEW.......................................................................................................................8
3.1 Front Panel ................................................................................................................................ 8
3.2 Front Panel LEDS....................................................................................................................... 9
3.3 Serial Ports .............................................................................................................................. 10
3.4 Bottom Panel.............................................................................................................................11
3.5 Rear Panel............................................................................................................................... 12
CABLES..........................................................................................................................................13
4.1 Ethernet Cables........................................................................................................................ 13
MANAGEMENT INTERFACE ................................................................................................................15
5.1 DS-Tool.................................................................................................................................... 15
5.1.1 Install IDS-Tool.................................................................................................................................. 15
5.1.2 Using DS-Tool ................................................................................................................................... 17
5.1.2.1 Explore device servers.............................................................................................................. 17
5.1.2.2 Configure device servers........................................................................................................... 18
5.1.2.3 Configure serial port................................................................................................................. 28
5.2 Configuration by Web Browser.................................................................................................. 37
5.2.1 Connect to the Web page..................................................................................................................... 37
5.2.1.1 System..................................................................................................................................... 39
5.2.1.2 Port serial setting...................................................................................................................... 45
5.2.1.3 Management ............................................................................................................................ 53

IDS-5042 Series User’s Manual
5.2.1.4 Save/Reboot............................................................................................................................. 58
5.3 Configuration by SSH Console.................................................................................................. 59
5.3.1 Connect to DS.................................................................................................................................... 59
TECHNICAL SPECIFICATIONS .............................................................................................................61

IDS-5042 Series User’s Manual
1 ORing Industrial Networking Corp.
Getting to Know Your Device Server
1.1 About the IDS-5042 Serial Device Server
IDS-5042 / 5042+ / 5042-l+ is an innovative 4 ports RS232/422 /485 to
2 ports LAN device server with optional isolation RS-422 / 485 serial
ports and one P.O.E PD Ethernet port.. Users are able to configure
IDS-5042 by DS-Tool via LAN port. IDS-5042 offers many powerful
features for HW & SW redundant functions. When the connection
between master-link and LAN fails, the IDS-5042 can automatically
switch to another LAN port within 10mS, and still guarantee a non-stop
connection.
IDS-5042 also supports switch mode, users can use Daisy Chain to
reduce the usage of Ethernet switch ports. Secondly, the IDS-5042 can
simultaneously transfer data into 5 host PCs. Thisfeature can assure all critical data that saved
in different host PCs to avoid Ethernet break or host PCs failure. Device also supports the data
encryption with SSL, so it can assure the data transfer safely.
Thirdly, the IDS-5042 provides dual redundant power inputs on terminal block. IDS-5042 also
provides NAT pass through function so that users are able to manage IDS-5042 inside or
outside the NAT router. It is easy for different IP domain users to use IDS-5042. Therefore,
IDS-5042 is the best communication redundant solution for current application of serial
devices.
1.2 Software Features
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 2.
Highly Security Capability: WEP/WPA/WPA2/802.1X/Radius/TKIP supported
NAT-pass through: User can manage IDS-5042 through NAT router
PPPoE for internet connection.
Data Encryption with SSL for Security data transfer.
DDNS for domain name service.
Redundant Power Inputs: 12~48VDC on power jack and terminal block
Redundant multiple host devices: 5 simultaneous in Virtual COM, TCP Server, TCP Client
mode, UDP
Secured Management by HTTPS and SSH,
Versatile Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
Event Warning by Syslog, Email, SNMP trap, and Beeper
Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA
1.3 Hardware Features
Redundant Power Inputs: 12~48 VDC on terminal block and power jack
Operating Temperature: -10 to 60oC
Storage Temperature: -40 to 85oC
Operating Humidity: 5% to 95%, non-condensing
Casing: IP-30
2 10/100Base-T(X) Ethernet port
1 optional P.O.E PD port (IDS-5042+ and IDS-5042-I+)
4 isolated serial port (IDS-5042I+)
Dimensions(W x D x H) : 52 mm(W)x 106 mm( D )x 144 mm(H)

IDS-5042 Series User’s Manual
3 ORing Industrial Networking Corp.
Hardware Installation
2.1 Install IDS-5042 on DIN-Rail
Each IDS-5042 has a Din-Rail kit on rear panel. The Din-Rail kit helps IDS-5042 to fix on the
Din-Rail. It is easy to install the IDS-5042 on the Din-Rail:
2.1.1 Mount IDS-5042 on DIN-Rail
Step 1: Slant the IDS-5042 and mount the metal spring to Din-Rail.
Figure 2-1
Metal Spring

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 4.
Step 2: Push the IDS-5042 toward the Din-Rail until you heard a “click” sound.
Figure 2-2
2.2 Wall Mounting Installation
Each IDS-5042 has another installation method for you. A wall mount panel can be found in
the package. The following steps show how to mount the IDS-5042 on the wall:

IDS-5042 Series User’s Manual
5 ORing Industrial Networking Corp.
2.2.1 Mount IDS-5042 on wall
Step 1: Remove Din-Rail kit.
Figure 2-3

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 6.
Pozidrive
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel.
Just like the picture shows below:
Figure 2-4
The screws specification shows in the following two pictures. In order to prevent IDS-5042
from any damage, the size of screws should not be larger than the size that used in
IDS-5042.
Figure 2-5

IDS-5042 Series User’s Manual
7 ORing Industrial Networking Corp.
Step 3: Mount the combined IDS-5042 on the wall. .
Figure 2-6

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 8.
Hardware Overview
3.1 Front Panel
Figure 3-1
1. LED for PWR1 and system status. When the PWR1 links, the green LED will be light on.
2. LED for PWR2 and system status. When the PWR2 links, the green LED will be light on.
3. LED for fault indicator. When fault occurred, this red LED will be light on.
4. LED for Serial ports status. When data transmitted, the green LED will be light on. When
data received, the red LED will be light on.
5. LED of 10Base-T connection on Ethernet port.
3
2
1
4
5
6
7
8
9
11
10

IDS-5042 Series User’s Manual
9 ORing Industrial Networking Corp.
6. 10/100Base-T(X) Ethernet port
7. LED of 100Base-TX connection on Ethernet port.
8. RS-232/422/485 serial port. Mode configured by DS-Tool.
9. LED for P.O.E. and system status. When the P.O.E. power connected, the green LED will
be light on.. (IDS-5042+ and IDS-5042-I+)
10. RS-422/485 serial port with 2KV isolation. Mode configured by DS-Tool.
11. 10/100Base-T(X) Ethernet port. (P.O.E. PD port, IDS-5042+ and IDS-5042-I+)
3.2 Front Panel LEDS
The following table describes the labels that stick on the IDS-5042.
LED
Color
Status
Description
P.O.E
Green / Red
On
Power supplied over Ethernet Cable
Red Blinking
Indicates and IP conflict, or DHCP or BOOTP
server did not respond properly
PWR1
Green/Red
On
DC power 1 activated.
Red blinking
Indicates an IP conflict, or DHCP or BOOTP
server did not respond properly
PWR2
Green/Red
On
DC power 2 activated.
Red blinking
Indicates an IP conflict, or DHCP or BOOTP
server did not respond properly
Fault
Red
On
Fault event occurred.
S1 ~ S4
Green
Blinking
Serial port is transmitting data
Red
Blinking
Serial port is receiving data

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 10.
ETH1
Green/Amber
Green On/Blinking
100Mbps LNK/ACT
Amber On/Blinking
10Mbps LNK/ACT
ETH2
Green/Amber
Green On/Blinking
100Mbps LNK/ACT
Amber On/Blinking
10Mbps LNK/ACT
Table 3-1 Front panel LEDs
3.3 Serial Ports
There 4 serial ports on the front panel of IDS-5042 shown as below:
Pin #
RS 232
RS 422
RS 485
( 4 wire )
RS 485
( 2 wire )
1
DCD
RXD -
RXD -
2
RXD
RXD +
RXD +
3
TXD
TXD +
TXD +
DATA +
4
DTR
TXD -
TXD -
DATA -
5
GND
GND
GND
GND
6
DSR
7
RTS
8
CTS
9
RI
RS 232 mod act as DTE
Table 3-2 Pin assignment
DB9 connector

IDS-5042 Series User’s Manual
11 ORing Industrial Networking Corp.
Pin #
RS 422
RS 485
( 4 wire )
RS 485
( 2 wire )
1
GND
GND
GND
2
RXD -
RXD -
3
RXD +
RXD +
4
TXD -
TXD -
DATA -
5
TXD +
TXD +
DATA +
3.4 Bottom Panel
The bottom panel components of IDS-5042/42+/42-I+ are shown as below:
1. Terminal block includes: PWR1, PWR2 (12 ~ 48V DC) and Relay output (1A@24VDC).
2. Reset button. 5 seconds for factory default.
PWR1, PWR2 (12-48V DC) and
Reset Button Relay output (1A@24VDC).
Figure 3-2 Bottom Panel
5 Pin Terminal block connector

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 12.
3.5 Rear Panel
The rear panel components of IDS-5042 are shown as below:
1. Screw holes for wall mount kit.
2. Din-Rail kit
Figure 3-3 Rear Panel

IDS-5042 Series User’s Manual
13 ORing Industrial Networking Corp.
Cables
4.1 Ethernet Cables
The IDS-5042 has standard Ethernet ports. According to the link type, the IDS-5042 use CAT
3, 4, 5,5e UTP cables to connect to any other network device (PCs, servers, switches, routers,
or hubs). Please refer to the following table for cable specifications.
Cable
Type
Max. Length
Connector
10BASE-T
Cat. 3, 4, 5 100-ohm
UTP 100 m (328 ft)
RJ-45
100BASE-TX
Cat. 5 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
Table 4-1 Cable Types and Specifications
100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3
and 6 are used for receiving data.

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 14.
Pin Number
Assignment
1
TD+
2
TD-
3
RD+
4
P.O.E. power input +
5
P.O.E. power input +
6
RD-
7
P.O.E. power input -
8
P.O.E. power input -
Table 4-2 RJ-45 Pin Assignments
The IDS-5042 supports auto MDI/MDI-X operation. You can use a straight- through cable to
connect PC to IDS-5042. The following table below shows the 10BASE-T/ 100BASE-TX MDI
and MDI-X port pin outs.
Pin Number
MDI port
MDI-X port
1
TD+(transmit)
RD+(receive)
2
TD-(transmit)
RD-(receive)
3
RD+(receive)
TD+(transmit)
4
P.O.E. power input +
P.O.E. power input +
5
P.O.E. power input +
P.O.E. power input +
6
RD-(receive)
TD-(transmit)
7
P.O.E. power input -
P.O.E. power input -
8
P.O.E. power input -
P.O.E. power input -
Table 4-2 MDI / MDI-X pins assignment
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.

IDS-5042 Series User’s Manual
15 ORing Industrial Networking Corp.
Management Interface
5.1 DS-Tool
DS-Tool is a powerful Windows utility for DS series. It supports device discovery, device
configuration, group setup, group firmware update, monitoring functions...etc. It is easy for
you to install and configure devices over the network.
5.1.1 Install IDS-Tool
Step 1: Execute the Setup program, click “start”after selecting the folder for DS-Tool.
Figure 5-1

IDS-5042 Series User’s Manual
ORing Industrial Networking Corp 16.
Step 2: When installation complete successfully, then click “OK”.
Figure 5-2
Step 3: Check for your selection.
Figure 5-3