ORiNG IDS-5042-WG Series User manual

Industrial Device Server User’s Manual
IDS-5042-WG / 5042-IWG Series
Version 1.0
May 2008.
ORing Industrial Networking Corp.
4F., NO.3, Lane235, Baociao Rd.Sindian City,
Taipei County 23145 Taiwan, R.O.C.
Tel: + 886 2 2918 3036
Fax:+ 886 2 2918 3084
Website : www.oring-networking.com
E-mail : [email protected]

Table of Content
GETTING TO KNOW YOUR DEVICE SERVER ...............................................................................................1
1.1 About the IDS-5042-WG / 5042-IWG Serial Device Server ..............................................................1
1.2 Software Features ............................................................................................................................1
1.3 Hardware Features ...........................................................................................................................2
HARDWARE INSTALLATION .......................................................................................................................3
2.1 Install IDS-5042-WG / 5042-IWG on DIN-Rail ..................................................................................3
2.1.1 Mount IDS-5042-WG / 5042-IWG on DIN-Rail.............................................................................3
2.2 Wall Mounting Installation .................................................................................................................4
2.2.1 Mount IDS-5042-WG / 5042-IWG on wall ....................................................................................5
HARDWARE OVERVIEW ............................................................................................................................8
3.1 Front Panel .......................................................................................................................................8
3.2 Front Panel LEDS.............................................................................................................................9
3.3 Serial Ports .....................................................................................................................................10
3.4 Bottom Panel .................................................................................................................................. 11
3.5 Rear Panel......................................................................................................................................12
CABLES ............................................................................................................................................... 13
4.1 Ethernet Cables ..............................................................................................................................13
MANAGEMENT INTERFACE .................................................................................................................... 15
5.1 DS-Tool...........................................................................................................................................15
5.1.1 Install IDS-Tool...........................................................................................................................15
5.1.2 Using DS-Tool ............................................................................................................................17
5.1.2.1 Explore device servers .....................................................................................................17
5.1.2.2 Configure device servers..................................................................................................18
5.1.2.3 Configure serial port .........................................................................................................26
5.2 Configuration by Web Browser .......................................................................................................35
5.2.1 Connect to the Web page ..........................................................................................................35
5.2.1.1 System .............................................................................................................................37
5.2.1.2 Port serial setting..............................................................................................................42

IDS-5042-WG Series User’s Manual
5.2.1.3 Management ....................................................................................................................50
5.2.1.4 Save/Reboot.....................................................................................................................54
5.3 Configuration by SSH Console .......................................................................................................55
5.3.1 Connect to DS............................................................................................................................55
TECHNICAL SPECIFICATIONS ................................................................................................................. 56

IDS-5042-WG Series User’s Manual
1 ORing Industrial Networking Corp.
Getting to Know Your Device Server
1.1 About the IDS-5042-WG / 5042-IWG Serial Device Server
IDS-5042-WG / 5042-IWG is an innovative 4 ports RS232/422/485 to
802.11b/g WLAN and 2 ports LAN device server. Users are able to
configure the Switch by DS-Tool via LAN port or WLAN interface, but
not simultaneously. Once LAN port is activated, WLAN interface will
enter standby mode to minimize power consumption. IDS-5042-WG
/ 5042-IWG offers many powerful features for HW & SW redundant
functions. When the connection between master-link and LAN fails,
IDS-5042-WG / 5042-IWG can automatically switch to another LAN
port within 10mS, and still guarantees a non-stop connection.
IDS-5042-WG / 5042-IWG also supports switch mode, users can use
Daisy Chain to reduce the usage of Ethernet switch ports. Secondly,
IDS-5042-WG / 5042-IWG can simultaneously transfer data into 5
host PCs. This feature can assure all critical data that saved in different host PCs to avoid
Ethernet break or host PCs failure.
Thirdly, IDS-5042-WG / 5042-IWG provides dual redundant power inputs on terminal block.
IDS-5042-WG / 5042-IWG also provides NAT pass through function so that users are able to
manage IDS-5042-WG / 5042-IWG inside or outside the NAT router. It is easy for different IP
domain users to use IDS-5042-WG / 5042-IWG. Therefore, IDS-5042-WG / 5042-IWG is the
best communication solution for wireless application of quad-port serial devices.
1.2 Software Features
Redundant Dual Ethernet Ports: Recovery time < 10ms.

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 2.
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports.
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
NAT-pass through: User can manage IDS-5042-WG / 5042-IWG through NAT router.
Highly Security Capability: WEP/WPA/WPA2/TKIP supported
Redundant Power Inputs: 12~48VDC on terminal block.
Redundant multiple host devices: 5 simultaneous in Virtual COM, TCP Server, TCP Client
mode, UDP.
Secured Management by HTTPS and SSH.
Versatile Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA 32bits
1.3 Hardware Features
Redundant Power Inputs: 12~48 VDC on terminal block and power jack
Operating Temperature: -10 to 55oC
Storage Temperature: -20 to 85oC
Operating Humidity: 5% to 95%, non-condensing
Casing: IP-30
2 10/100Base-T(X) Ethernet port
Dimensions(W x D x H) : 52 mm(W)x 106 mm( D )x 144 mm(H)

IDS-5042-WG Series User’s Manual
3 ORing Industrial Networking Corp.
Hardware Installation
2.1 Install IDS-5042-WG / 5042-IWG on DIN-Rail
Each IDS-5042-WG / 5042-IWG has a Din-Rail kit on rear panel. The Din-Rail kit helps
IDS-5042-WG / 5042-IWG to fix on the Din-Rail. It is easy to install the IDS-5042-WG /
5042-IWG on the Din-Rail:
2.1.1 Mount IDS-5042-WG / 5042-IWG on DIN-Rail
Step 1: Slant the IDS-5042-WG / 5042-IWG and mount the metal spring to Din-Rail.
Figure 2-1
Metal Spring

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 4.
Step 2: Push the IDS-5042-WG / 5042-IWG toward the Din-Rail until you heard a “click”
sound.
Figure 2-2
2.2 Wall Mounting Installation
Each IDS-5042-WG / 5042-IWG has another installation method for you. A wall mount panel
can be found in the package. The following steps show how to mount the IDS-5042-WG /
5042-IWG on the wall:

IDS-5042-WG Series User’s Manual
5 ORing Industrial Networking Corp.
2.2.1 Mount IDS-5042-WG / 5042-IWG on wall
Step 1: Remove Din-Rail kit.
Figure 2-3

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 6.
Pozidrive
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel.
Just like the picture shows below:
Figure 2-4
The screws specification shows in the following two pictures. In order to prevent
IDS-5042-WG / 5042-IWG from any damage, the size of screws should not be larger than
the size that used in IDS-5042-WG / 5042-IWG.
Figure 2-5

IDS-5042-WG Series User’s Manual
7 ORing Industrial Networking Corp.
Step 3: Mount the combined IDS-5042-WG / 5042-IWG on the wall. .
Figure 2-6

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 8.
Hardware Overview
3.1 Front Panel
Figure 3-1
1. LED for PWR1 and system status. When the PWR1 links, the green LED will be light on.
2. LED for PWR2 and system status. When the PWR2 links, the green LED will be light on.
3. LED for fault indicator. When fault occurred, this red LED will be light on.
4. LED for Serial ports status. When data transmitted, the green LED will be light on. When
data received, the red LED will be light on.
5. LED of 10Base-T connection on Ethernet port.
3
2
1
4
5
6
7
8
10
11
9
12

IDS-5042-WG Series User’s Manual
9 ORing Industrial Networking Corp.
6. 10/100Base-T(X) Ethernet port
7. LED of 100Base-TX connection on Ethernet port.
8. RS-232/422/485 serial port. Mode configured by DS-Tool.
9. RS-422/485 serial port with 2KV isolation. Mode configured by DS-Tool.
10. Reverse SMA antenna connector.
11. LED for WLAN link status. When the WLAN links, the green LED will be light on.
12. LED for WLAN signal strength. 4 / 3 / 2 / 1 / 0 LED(s) will be light on correspond to WLAN
signal strength 100% / 75% / 50% / 25% / BAD.
3.2 Front Panel LEDS
The following table describes the labels that stick on the IDS-5042-WG / 5042-IWG.
LED Color Status Description
On DC power 1 activated.
PWR1 Green/Red
Red blinking Indicates an IP conflict, or DHCP or BOOTP
server did not respond properly
On DC power 2 activated.
PWR2 Green/Red
Red blinking Indicates an IP conflict, or DHCP or BOOTP
server did not respond properly
Fault Red On Fault event occurred.
Green Blinking Serial port is transmitting data
S1 ~ S4
Red Blinking Serial port is receiving data
Green On/Blinking 100Mbps LNK/ACT
ETH1 Green/Amber
Amber On/Blinking 10Mbps LNK/ACT

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 10.
Green On/Blinking 100Mbps LNK/ACT
ETH2 Green/Amber
Amber On/Blinking 10Mbps LNK/ACT
WLAN Green On/Blinking WLAN LNK/ACT
WLAN Signal Green On
4 / 3 / 2 / 1 / 0 LED(s) will be light on correspond
to WLAN signal strength 100% / 75% / 50% /
25% / BAD
Table 3-1 Front panel LEDs
3.3 Serial Ports
There 4 serial ports on the front panel of IDS-5042-WG / 5042-IWG showed as below:
Pin # RS 232 RS 422 RS 485
( 4 wire )
RS 485
( 2 wire )
1 DCD RXD - RXD -
2 RXD RXD + RXD +
3 TXD TXD + TXD + DATA +
4 DTR TXD - TXD - DATA -
5 GND GND GND GND
6 DSR
7 RTS
8 CTS
9 RI
RS 232 mod act as DTE
Table 3-2 Pin assignment
DB9 connecto
r

IDS-5042-WG Series User’s Manual
11 ORing Industrial Networking Corp.
Pin # RS 422 RS 485
( 4 wire )
RS 485
( 2 wire )
1 GND GND GND
2 RXD - RXD -
3 RXD + RXD +
4 TXD - TXD - DATA -
5 TXD + TXD + DATA +
3.4 Bottom Panel
The bottom panel components of IDS-5042-WG / 5042-IWG/42+/42-I+ are showed as below:
1. Terminal block includes: PWR1, PWR2 (12 ~ 48V DC) and Relay output (1A@24VDC).
2. Reset bottom. 5 seconds for factory default.
PWR1, PWR2 (12-48V DC) and
ResetButton Relayoutput(1A@24VDC).
Figure 3-2 Bottom Panel
5 Pin Terminal block connecto
r

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 12.
3.5 Rear Panel
The rear panel components of IDS-5042-WG / 5042-IWG are showed as below:
1. Screw holes for wall mount kit.
2. Din-Rail kit
Figure 3-3 Rear Panel

IDS-5042-WG Series User’s Manual
13 ORing Industrial Networking Corp.
Cables
4.1 Ethernet Cables
The IDS-5042-WG / 5042-IWG has standard Ethernet ports. According to the link type, the
IDS-5042-WG / 5042-IWG use CAT 3, 4, 5,5e UTP cables to connect to any other network
device (PCs, servers, switches, routers, or hubs). Please refer to the following table for cable
specifications.
Cable Type Max. Length Connector
10BASE-T Cat. 3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45
100BASE-TX Cat. 5 100-ohm UTP UTP 100 m (328 ft) RJ-45
Table 4-1 Cable Types and Specifications
100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3
and 6 are used for receiving data.

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 14.
Pin Number Assignment
1 TD+
2 TD-
3 RD+
4 Not used
5 Not used
6 RD-
7 Not used
8 Not used
Table 4-2 RJ-45 Pin Assignments
The IDS-5042-WG / 5042-IWG supports auto MDI/MDI-X operation. You can use a straight-
through cable to connect PC to IDS-5042-WG / 5042-IWG. The following table below shows
the 10BASE-T/ 100BASE-TX MDI and MDI-X port pin outs.
Pin Number MDI port MDI-X port
1 TD+(transmit) RD+(receive)
2 TD-(transmit) RD-(receive)
3 RD+(receive) TD+(transmit)
4 Not used Not used
5 Not used Not used
6 RD-(receive) TD-(transmit)
7 Not used Not used
8 Not used Not used
Table 4-2 MDI / MDI-X pins assignment
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.

IDS-5042-WG Series User’s Manual
15 ORing Industrial Networking Corp.
Management Interface
5.1 DS-Tool
DS-Tool is a powerful Windows utility for DS series. It supports device discovery, device
configuration, group setup, group firmware update, monitoring functions...etc. It is easy for
you to install and configure devices over the network.
5.1.1 Install IDS-Tool
Step 1: Execute the Setup program, click “start” after selecting the folder for DS-Tool.
Figure 5-1

IDS-5042-WG Series User’s Manual
ORing Industrial Networking Corp 16.
Step 2: When installation complete successfully, then click “OK”.
Figure 5-2
Step 3: Check for your selection.
Figure 5-3