Orion FDR1000150 User manual

Page - 1 MSC005150
Stand and Fill Feeder Assembly Manual
Thank you for purchasing a new Orion Hunting Products Stand
and Fill Feeder.
It is our Overwhelming desire to ensure that you are satisfied with
this product.
We have taken great pride in every aspect of its design and
manufacturing right here in the U.S.A. and it is our hope that you
can take pride in owning it.
If it does not meet your expectations for any reason please give us
a call or text at (906)-767-0270 and may it truly Elevate your
Pursuit.
Hunt safely without limits. Hunt Orion!
Tools Required
1) 9/16” Open End/Box End Combination Wrench
2) 9/16” Socket with Ratchet or Cordless Impact
drill preferred
3) Hammer

Page - 2 MSC005150
150lb Stand and Fill Feeder Overview
Feeder Base Box –FDR1000150
Please read through entire assembly instructions before beginning
⬣Feeder Base [FDR1000150]
⬣Broadcast Spreader [FDR1000500]

Page - 3 MSC005150
Contents
Feeder Base
FDR1000150
⬣[4X] Trough –FDR1000101
⬣[3X] Feeder Side –FDR1000102
⬣[1X] Feeder Side with Gate –
FDR1000103
⬣[1X] Feeder Gate –FDR1000107
⬣[4X] Feeder Base –FDR1000104
⬣[1X] Broadcast Feeder–
FDR1000500
⬣[1X] Base Plate –FDR1000106
⬣[4X] Rebar Anchor –FDR1000115
⬣[1X] Feeder Top –FDR1000112
A
B
C
⬣[4X] 10-32 x ½ Machine Screw –
HDW1001243
⬣[4X] 10-32 x Nylon Insert Nut–
HDW1001244
⬣[8X] 3/8-16 x 1-1/4 Thumb
Screw–HDW1001240
D
E
⬣[24X] 3/8-16 x 3/4 Flange Bolt –
HDW1001239
⬣[20X] 3/8-16 Flange Nut –
HDW1001215

Page - 4 MSC005150
Elevated Hunting Stand Assembly
**Finger tighten hardware initially**
Parts
1x Broadcast Feeder Legs
1x Base Plate
4x 10-32 x ¾ Screws [A]
4x 10-32 Nylon Lock Nuts [B]
Process
Unscrew the wingnuts from the broadcast feeder to make assembly easier.
Use the screws [A] and nuts[B] to attach the broadcast feeder to the base
plate.
1

Page - 5 MSC005150
Parts
4x Feeder Base
4x 3/8-16 x ¾ Flange head bolts [D]
4x 3/8-16 Flange head nuts [E]
Process
Use the 3/8-16 bolts [D] and nuts [E] to join the 4 feeder bases together at the
top hole location, do not bolt the bottom together.
2

Page - 6 MSC005150
Parts
1x Base Plate Assm
1x Feeder Side
1x Feeder Side with Gate
1x 3/8-16 x ¾ Flange head bolts [D]
1x 3/8-16 Flange head nuts [E]
Process
Hook the bottom of the feeder base plate into the feeder side and bolt the
bottom of the assembly together. Do not bolt the top holes
3

Page - 7 MSC005150
Parts
2x Feeder Side
3x 3/8-16 x ¾ Flange head bolts [D]
3x 3/8-16 Flange nuts [E]
Process
Repeat step 3 for the remaining side.
4

Page - 8 MSC005150
Parts
1x Baseplate with attached spreader legs
4x 3/8-16 x ¾ Flange head bolts [D]
Process
Attach the baseplate to the base using the bolts [D].
5

Page - 9 MSC005150
Parts
1x Broadcast feeder
Process
Re-assemble the broadcast spreader onto the legs using the wingnuts.
Ensure that the door is facing the gate.
6

Page - 10 MSC005150
Parts
4x Feeder Trough
8x 3/8-16 x ¾ Flange head bolts [D]
8x 3/8-16 Flange nuts [E]
Process
Bolt together the top and bottom holes on all 4 sides of the feeder trough as
shown. Do not fasten the middle holes
7