SOLAC ME7711 User manual

Solac is a registered Trade Mark
MOD.
ME7711 / ME7712 / ME7713
BODY MASSAGER
INSTRUCTIONS FOR USE

ENGLISH EN
Read these instructions carefully
before switching on the appliance and
keep them for future reference.
Failure to follow and observe these
instructions may result in an accident.
Failure to follow and observe these
instructions may result in an accident.
DESCRIPTION
1 Main body
2 Massage / red LED on/o switch
3 Variable massage intensity control
4 Red LEDs
5 Massage head adaptor
6 Mains cable
7 Finger massage head (PRE-TREATMENT)
8 Serrated roller head (ANTI-CELLULITE)
9 Exfoliating head (DRY BRUSH)
10 Wave shaped head (BODY CONTOUR)
11 Smooth roller head (BODY-MODELLING)
12 Ball massage head
13 Parallel spiky disk massage head (ANTI-
CELLULITE)
14 Fabric cover
SAFETY ADVICE AND
WARNINGS
This appliance can be used by
children aged from 8 years and
above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge if
they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved.
Cleaning and user
maintenance must not be done
by children unless they ar e
supervised
If the mains connection is
damaged, it must be replaced.
Take the appliance to an
authorised Technical
Assistance Service In order to
prevent any danger, do not
attempt to dismantle or repair it
yourself.
Ensure that the voltage indicated on the
nameplate matchesthe mains voltage before
plugging in the appliance.
Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.

The appliance’s plug must t into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
Keep children and bystanders away when
using this appliance.
Do not use the appliance if the cable or plug is
damaged.
If any of the appliance casings breaks,
immediately disconnect the appliance from the
mains to prevent the possibility of an electric
shock.
Do not use the appliance if it has fallen on the
oor, if there are visible signs of damage or if it
has a leak.
Do not use the appliance with damp hands or
feet, or when barefooted.
Do not force the electrical wire. Never use the
electric wire to lift up, carry or unplug the
appliance.
Do not wrap the cable around the appliance.
Check the state of the power cord. Damaged or
tangled cables increase the risk of electric
shock.
Do not use or store the appliance outdoors.
Do not touch the plug with wet hands.
Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
CAUTION: Keepthe appliance dry.
CAUTION: Do not use the appliance near
water.

EN
Do not use the appliance near bathtubs,
showers or swimming pools.
Do not use the appliance with damp hands or
feet, or when barefoot.
Keep the appliance away from heat sources
and sharp edges.
Do not use the massager on the abdomen area
if you are pregnant or believe that you might be
pregnant.
Should you suer from any health problems,
e.g. pace maker tted, consult your doctor.
Do not use the massager directly on:
Skin rashes or inammation
Burns, open wounds, infected skin
Do not use it if you suer from any of the
following illnesses or ailments: varicose veins,
poorcirculation, bruising, inammation of the
veins, thrombosis, torn skin or diabetes
Do not use the appliance if you are taking
medication that may reduce sensory capacity
USE AND CARE:
Do not use the appliance if its accessories are
not properly tted.
Do not use the appliance if the on/o switch
does not work.
Disconnect the appliance from the mains when
not in use, before cleaning, making any
adjustment, battery charge or accessory
change.
This appliance is for household use only, not
professional or industrial use.
Store this appliance out of the reach of children
and/or those with reduced physical, sensory or
mental abilities or those unfamiliar with its use
Keep the appliance in good condition. Check
that the moving parts are not misaligned or
locked and make sure there are no broken
parts or anomalies that may prevent the
appliance from operating correctly.
Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
The table adjoined contains example recipes
with ingredient quantities and operating times.
Do not use the appliance on any animal.
Use the handle/s to lift or move the appliance.
If you use the appliance in a bathroom or
similar place, unplug the appliance from the
mains when it is not in use, even if it is only for
ashort while, as proximity to water poses a
risk, even if the appliance is switched o.
Disconnect the appliance from the mains when
it is not in use, before cleaning it, making any
adjustments, charging the battery or changing
accessories.
Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
Never rest the appliance on a surface while in
use.
Do not use the appliance for more than 20
minutes at any one time. Leave it standing to
cool for one hour before reuse.
Do not use the appliance on pets or animals.
CAUTION: Do notfall asleep while using this
appliance, as this could be harmful.
SERVICE:
Any misuse or failure tofollow the instructions
for use renders the guarantee andthe
manufacturer’s liability null and void.
PROFESSIONAL LIPOMODELLING SYSTEM.
This massager can be used to provide an
eective therapeutic massage at home,
continued use will help you to:
Improve blood circulation.
Obtain rmer and smoother skin.
Eliminate uids and toxins.
Eliminate accumulated fat and “orange peel”
skin.
CHOOSING A MASSAGE HEAD
PRE-TREATMENT (7): "nger massage" head
application for painful cellulite and aching
muscle.
ANTI-CELLULITE (8 and 13): “Serrated roller”
head. This eliminates cellulite, helps tighten
skin, stimulates blood ow, tones the muscles,
performs lymphatic drainage, reduces volume,
relieves back ache, sciatica and lumbago,
warms up the muscles, relaxes and relieves
stress, for example.
BODY-CONTOUR (10): “Wave shaped” head,
tones and improves blood circulation. For use
on the thigh and buttock areas.
Fabric cover (14): For exclusive use with the
BODY -CONTOUR toning head. For greater
comfort cover the head with the fabric cover.
Never use it with creams.

EN
BODY-MODELLING (11): “Smooth roller”
head, eective treatment on painful cellulite
DRY BRUSH (9): Exfoliating brush, removes
dead skin and stimulates blood ow.
BALL MASSAGE HEAD (12): Stimulates and
tones the muscles, helping to rm the skin. It
improves circulation in the abdominal area,
eliminating localised toxins and improving the
intestinal tract, preventing constipation.
INSTRUCTIONS FOR USE
GENERAL RECOMMENDATIONS FOR USE:
The intensity control allows you to regulate the
intensity of the massage as required. Start with
a gentle speed and progressively increase
depending on yoursensitivity to the massage.
The red light is an additional massage function.
Use it to strengthen the eectiveness of the
massage.
If you use specic treatment creams (toning or
anti-cellulite) apply these after the massage.
The appliance is equipped with a motor
protection system that switches the motor o if
it overheats. If this occurs, leave the appliance
to cool down before attempting to restart it.
If you wish to continue using the appliance,
allow it tocool down before proceeding.
For a more eective treatment, use the
appliance regularly. Use the appliance each
day until you notice the results, you can then
use it to maintain these results. To maintain the
results over the long-term, adapt your lifestyle
habits and food.
BEFORE USE:
Make sure that all the product’s packaging has
been removed.
USE:
Unroll the cable completely before plugging it
in.
Connect the appliance tothe mains.
Turn the appliance on using the on/o switch.
Select the desired speed.
Choose a massage head
You may alternate the use of dierent heads
during the same massage.
Set the intensity of the massage using the
intensity control (3) and place the massager on
the area on which you are going to work.
Use the massagecontroller toset the intensity,
using your nger to turn the controller (3) one
way or the other depending on the desired
setting (Fig. 4)
Move the switch (2) to the massage position
(Fig.2 B) or to the “massage + infrared position
(IR) position” (Fig.2 C) according tothe desired
treatment.
Fit the head corresponding to the desired
treatment onto the head adaptor (Fig. 3)
Hold the appliance rmly with both hands and
move it over the skin in the direction of the
blood circulation (see “Massage Direction”).
Without pressing too hard, simply glide the
massager over the area to be treated. Pressing
the appliance too hard against the skin will
prevent the motor from operating eciently.
MASSAGE DIRECTION:
Always glide the appliance over the skin in the
direction of the blood circulation. In an upward
direction.
NEVER directly massage the spine.
NEVER directly massage a bone (knee, ankle,
elbow). The protruding parts of the massage
head could hit the bone,causing an injury.
Legs: Place the appliance on the thigh, close to
the knee, and glide it gently upwards towards
the hip (Fig. 5)
Buttocks: Combine upward and circular
movements. (Fig. 6)
Abdomen: Place the appliance on the navel
and move it gently outwards (Fig 7). Never
make circular movements around the navel.
Arms: Place the appliance close tothe elbow
and glide it gently towards the armpit. Repeat
the massage from the armpit towards the elbow
(Fig. 8)
Back: Place the appliance in the area of the
spine and glide it gently upwards towards the
shoulder blade (g. 9)
CHOOSING A MASSAGE HEAD:
1 SKIN PREPARATION
It is essential to start by preparing the skin
properly before performing the massage in the
area where it is required, so we should
exfoliate the skin using the natural bristle brush

EN
(DRY BRUSH), which will leave the area free of
dead cells and make the skin softer. Avoid
damaging the skin through excessive
exfoliation (once per week is sucient). Gently
massage the entire area for 5 minutes. This
step helps to stimulate your blood circulation
and metabolism.
The skin should always be brushed toward the
heart, starting with the feet and moving up to
the hips in the case of legs, and from wrist to
shoulder for arms. Persist on rougher areas
and be careful with sensitive areas. Adjust the
intensity of exfoliation based on the condition of
the skin, the body area and particular
sensitivity.
2. WARM UP
For eective treatment, we recommend rst
pre-warming and draining the area to be
treated, especially if you have hard, painful
cellulite. The aim is to gradually knead the area
so that warms through, making the fat easier to
separate from the skin; this will also shift
retained toxins, activating local venous and
lymphatic circulation. To perform lymphatic
drainage, use very gentle shallow movements.
The main goal of lymphatic drainage is to
stimulate the lymphatic system to increase
the removal of liquids thatsometimes
accumulate between the cells.
2 TREATMENT:
ANTI-CELLULITE or BODY-MODELLING
head, in the case of painful cellulite
Once the warm up actions have been
completed, we can begin performing the
massage treatment. Unlike draining, the
reduction massage works with strong, fast,
repetitive movements on the skin, using the
force of the kneading and sliding movements.
In general, the anti -cellulite reduction massage
is recommendedfor modelling the curves of the
body, working on the "saddlebags", abdomen,
buttocks, etc.
3 COMPLETION
Apply a moisturizing or treatment cream using
the BODY-CONTOUR head.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Stop the appliance by releasing the pressure
on the on/o button.
Unplug the appliance to the mains.
Clean the appliance
CLEANING
Disconnect the appliance from the mains and
let it cool before undertaking any cleaning task.
Clean the equipment using a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
For EU product versions and/or in the case
that itis requested in your country:
ECOLOGY AND RECYCLABILITY OF
THE PRODUCT
The materials of which the packaging of this
appliance consists are included in a collection,
classication and recycling system. Should you
wish to dispose of them, use the appropriate
public containers for each type of material.
The product does not contain concentrations of
substances that could be considered harmful to
the environment

EN
This symbol means that in case you wish
to dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of waste electrical and
electronic equipment (WEEE)
This appliance complies with Directive
2014/35/EC on Low Voltage, Directive
2014/30/EC on Electromagnetic Compatibility,
Directive 2011/65/EU on the restrictions of the
use of certain hazardous substances in electrical
and electronic equipment and Directive
2009/125/EC on the ecodesign requirements for
energy-related products