oticon Alta2 Pro Ti User manual

RITE
Alta2 Pro Ti
Nera2 Pro Ti
Ria2 Pro Ti
Instructions for use

Model overview
This booklet is valid for Oticon RITE in the following hearing aid
families and models:
Alta2 Pro Ti Nera2 Pro Ti Ria2 Pro Ti
The following speakers are available for the above models:
Speaker 60
Speaker 85
Speaker 100
Power ex mould speaker 100

Introduction to this booklet
This booklet guides you in how to use and maintain your new hearing
aid. Please read the booklet carefully including the Warning section.
This will help you to achieve the full benet of your new hearing aid.
Your hearing care professional has adjusted the hearing aid to meet
your needs. If you have additional questions, please contact your
hearing care professional.
For your convenience this booklet contains a navigation bar to help
you navigate easily through the dierent sections.
About Start-up Handling Options Tinnitus Warnings More info

Intended use
The hearing aid is intended to amplify and transmit sound to the
ear and thereby compensating for impaired hearing within mild
to severe-to-profound hearing loss. This hearing aid is intended
for use by adults and children older than 36 months.
IMPORTANT NOTICE
The hearing aid amplication is uniquely adjusted and optimised to your
personal hearing capabilities during the hearing aid tting performed by
your hearing care professional.

Table of contents 1/2
About
Identify your hearing aid speaker and earpiece 10
Your hearing aid 12
Identify left and right hearing aid 14
Battery 15
Start up
Turn the hearing aid ON and OFF 16
When to replace a battery 17
Replace the battery 18
Handling
Caring for your hearing aid 20
MultiTool for handling batteries and cleaning 21
Put on the hearing aid 22
Standard earpieces: dome or Grip Tip 24
Replace dome or Grip Tip 25
ProWax miniFit filter 26

Continues on next page
Replace ProWax miniFit filter 27
Customised earpieces: Micro mould, LiteTip or Power ex mould 28
Clean Micro mould, LiteTip or Power flex mould 29
Replace ProWax filter in customised earpieces 30
Options
Optional features and accessories 32
Mute the hearing aid 33
Change programs 34
Change volume 36
Tamper-resistant battery drawer 38
Wireless accessories 40
Other options 42
Tinnitus
Tinnitus SoundSupport™ (optional) 44
Guidelines for tinnitus sound generator users 45
Sound options and volume adjustment 46

Table of contents 2/2
Limitation on use time 49
Important information for hearing care professionals about
Tinnitus SoundSupport 50
Warnings related to Tinnitus 53
Warnings
General warnings 54
More info
Troubleshooting guide 60
Water resistant 62
Conditions of use 63
Technical information 64
Australia only 74
Warranty 75

10 About Start-up Handling Options Tinnitus Warnings More info
Identify your hearing aid speaker and earpiece
This will make it easier for you to
navigate through this booklet.
Speakers
RITE hearing aids come with
three dierent speakers:.
Speaker
(60 shown)
Ear grip
(optional)
60 85 100
About

11
Earpieces
The speaker uses one of
the following earpieces:
Power ex mould speaker
* Please see details for replacing the dome or Grip Tip in section: Replace dome or GripTip
Micro mould or LiteTip
Grip Tip*
Dome (open dome shown)* 100

12 About Start-up Handling Options Tinnitus Warnings More info
Your hearing aid
What it is
Push button
Microphone
openings
Battery drawer
Speaker
(60 shown)

13
Mute, change
volume, and
program
Sound in
What it does
Contains the battery.
Battery drawer is also
the on/o switch
Sound out

14 About Start-up Handling Options Tinnitus Warnings More info
Identify left and right hearing aid
It is important to distinguish between the left and the right hearing
aid, as they might be programmed dierently.
You can nd left/right colour indicators in the battery drawer and on
60 and 85 speakers as shown. Indicators can also be found on 100
speakers and some earpieces.
A RED indicator marks the
RIGHT hearing aid.
A BLUE indicator marks the
LEFT hearing aid.

15
Battery
Your hearing aid is a miniature electronic device that runs on special
batteries. To activate the hearing aid, you must insert a new battery
in the battery drawer. See how in chapter “Replace the battery”.
Pull out to open
Battery drawer
Your hearing aid
battery size is 312

16 About Start-up Handling Options Tinnitus Warnings More info
Turn the hearing aid ON and OFF
The battery drawer is also used to switch the hearing aid on and o. To
preserve the battery, make sure your hearing aid is switched o when
you are not wearing it.
Turn ON
Close the
battery
drawer with
the battery
in place.
Turn OFF
Open the
battery drawer.
Start up

17
When to replace a battery
When it is time to replace the battery you will hear two beeps
repeated in moderate intervals until the battery runs out.
Two beeps
= The battery is running low
Four beeps
= The battery has run out
Battery maintenance tip
To make sure the hearing aid is always working, bring spare batteries
with you, or replace the battery before you leave home.

18 About Start-up Handling Options Tinnitus Warnings More info
Replace the battery
2. Uncover 3. Insert
Fully open the
battery drawer.
Remove the battery.
Remove the sticky
label from the +side
of the new battery.
Tip:
Wait 2 minutes so that the
battery can draw air, to make
sure to function optimally.
Insert the new battery
into the battery
drawer. Make sure the
+side faces up.
1. Remove

19
Close the battery drawer. The
hearing aid will play a jingle
through the earpiece.
Hold the earpiece close to your
ear to hear the jingle.
The MultiTool can be used for
battery change. Use the magnetic
end to remove and insert batteries.
The MultiTool is provided by
your hearing care professional.
4. Close Tip
MultiTool

20 About Start-up Handling Options Tinnitus Warnings More info
Caring for your hearing aid
When handling your hearing aid, hold it over a soft surface
to avoid damage if you drop it.
Clean the microphone openings
Carefully brush away debris from
the openings. Gently brush the
surface. Make sure the brush is clean
and that it is not pressed into
the openings.
IMPORTANT NOTICE
Use a soft, dry cloth to clean the hearing aid. It must never be washed or
immersed in water or other liquids.
Microphone
openings
Handling