Outsunny 84B-503 User manual

IN221000588V01_UK
84B-503
1. Do not discard any packaging until you have checked that you have all parts and
fittings.
2. Ensure you have enough room for safe assembly. Ensure children and pets are
kept out of the assembly area.
3. We suggest you carry out the assembly on a soft surface like a carpet or the opened
box, so as to avoid scratching the paint.
4. Please note that this products is made of cast metal, you may find some
unevenness on the surface which entirely normal for cast metal and is not a defect.
(1). Always lift and carry instead of dragging as dragging can cause damage.
(2). Clean with warm water and a lint free cloth.
(3). Do not use abrasive or corrosive cleaners.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
ASSEMBLY INSTRUCTION

Country Phone Email
0044-800-240-4004 [e-mail]
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please
read all the instructions in this user's manual. If you have any questions, please contact
our customer care center.
Our contact details are below:
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsenden lane South
Perivale, UB6 7RH
MADE IN CHINA

Maximum Weight Capacity of Chair: 220 Kg

A11
B11
C11
D2
③2E6
④2F6
G6
H4
I6
J11
⑦1⑧1
L 4
①
②
⑤
⑥
1
1
1
1
+1(spare)
+1(spare)
+1(spare)
+1(spare)
+1(spare)
+1(spare)
preassembled

C
B
A
D
H
Place all parts on a clean and soft surface.
Attach the Right and Left Arm(⑤,⑥) ,using
the studs (D) and washer, nuts (E,F,G) ,DO
NOT over tighten .and then using Studs (H)
and Washers and Nuts (E,F,G). Adjust to a
correct place ,then tighten D&H.
Adjust the pre-installed Rubber Pad (L) until the chair is level with the ground , Upon
completion of full assembly and bolted up-all screws can be tightened down. Tighten
all the nuts and cover them with nut caps(I&J).
05
02
03
01
04
washers