Pacific Casual 143-002-4SEC-V2 User manual

USER INSTRUCTIONS
MODEL #
ITM. / ART. 966657
2V-CES4-200-341
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
Address: 1060 Avenida Acaso ,Camarillo, CA 93012
10/31/2013
4 PIECE WOVEN SECTIONAL SEATING
TEL: [phone] (7:30am to 4:30pm PST, Monday to Friday, for US and Canada only)
Conditions for use of the product:
Domestic use only. Not for commercial use.

Page 2 of 9
Contents
Warning and Cautions
DANGER: Please keep children out of the assembly area
during assembly.
WARNING: Do not stand on the chairs. Do not sit on the
CAUTION: Use the
IMPORTANT: Please check the tightness of bolts at least
every 180 days.
armrests.
Assembly...................................... .................................4
Care and maintenance ...............................................2
Warning and Cautions..................................................2
2
Parts.................................................................................
Care and Maintenance
E
anihCniedaM
10/31/2013
FRAME
To clean frame, use mild soap and water. Do not use abrasive materials, cleaners or products containing bleach. Rinse
with clean water and dry thoroughly.
To maintain frame, periodically clean thoroughly dry. Drain any water that may have collected inside the frame. Water
not drained and exposed to freezing temperatures may cause damage to the frame tubing. Prior to storing, be sure to
clean and thoroughly dry.
FABRIC
To clean fabric, use mild soap, warm water and a soft cloth. Wipe minor spills immediately. Do not use abrasive
cleaners. The fabric on this set has been treated to resist stains. However, the use of commercially available fabric
cleaners may by necessary.
To maintain fabric, store in a dry space. When not in use, use a commercially available outdoor furniture cover.
Parts
Use at least 2 people to assemble. Please lay out all parts prior to assembly to verify all parts are included.
FOR YOUR SAFETY...
FOR SU SEGURIDAD...

Page 3 of 9
E anihCniedaM
10/31/2013
HARDWARE INCLUDED
Part Description Quantity
AA Bolt (M6x25) 3
BB Bolt (M6x30) 4
CC 6
DD 23
FF GG HH
Part Description Quantity
Bolt (M6x50)
FF 13
Bolt cap (M6)
Parts
Steel washer (M6)
II
JJ
GG 10
Nut
HH 10
Nut cap
II
JJ
Hex wrench
Wrench (M6)
1
1
PACKAGE CONTENTS
Part Description Quantity
A Left Loveseat 1
B Right Loveseat 1
C1 1
C2 1
Left Corner Section
1
C3
Right Corner Section
Front Panel of Corner Section
A
B
C1 C2
C3
(continued)
NN
NN Foot glide 9

Page 4 of 9 E anihCniedaM
10/31/2013
1
Assembly
Attaching the left corner section to the right corner section
Attach the left corner section (C1) to the right corner section (C2) at the seat with four washers (DD), two bolts (CC) and two nuts (GG)
using the wrenches ( II & JJ).
Attach the left corner section (C1) to the right corner section (C2) at the back with one washer (DD) and one bolt (AA ) using wrench (II).
Do not fully tighten bolts until Step 3.
C1 C2
DD
AA
CC DD DD GG
2 Attaching foot glides to feet
Screw one foot glide (NN) into each foot at the bottom of each love seat and curved section. A total of nine glides (NN) will be used.
NN
NN

Page 5 of 9 E anihCniedaM
10/31/2013
4Attaching the left love seat to the curved corner section
Assembly (continued)
Attach the front panel of the corner section (C3) to the left loveseat (A) with four washers (DD) , two bolts (BB) and two nuts (GG)
A
C3
Completely tighten all bolts (AA,BB & CC) and cover them with bolt caps (FF).
BB DD
Cover all nuts (GG) with nut caps (HH).
2 (C3)
DD GG
FF
HH
1 (C3)
A
C1
Attach the left loveseat (A) to coner section (C1) at the seat with four washers (DD), two bolts (CC) and two nuts (GG)
Attach the left loveseat (A) to the corner section (C1) at the back with one washer (DD), one bolt (AA) using wrench (II).
CC DD DD GG
DD
AA
using wrenches (II & JJ).
using wrenches (II,JJ).
12
3
3 Attaching the right loveseat to the curved corner section
B
Attach the right loveseat (B) to the corner section (C2) at the seat with four washers (DD), two bolts (CC) and two nuts (GG)
Attach the right loveseat (B) to the corner section (C2) at the back with one washer (DD), one bolt (AA) using wrench (II).
using the wrenches (II & JJ). Do not fully tighten bolts until Step 3.
CC DD DD GG
DD
AA
C1 C2
C3
BB
DD
2 (C3)
DD
GG
FF
HH
1 (C3)
B
Attach the front panel (C3) of the corner section to the right loveseat (B) with four washers (DD), two bolts (BB) and two nuts
Please note that the round tube (1) of the corner section (C3) should stay on the top while the rectangular tube (2) at the bottom.

Page 6 of 9
E anihCniedaM
10/31/2013
5Location of cushions and pillows
Assembly (continued)
Please identify each cushion or pillow according to below information.
1
2
3
4
5
6
7
Seat Cushion
Seat Cushion
Left and Right
Back Cushion
Corner Back
Cushion
Back Cushion
Medium
2
2
3
3
1
4
Cushion Shape LocationDescription Quantity
Loveseat
Curved Corner Section
Loveseat
Loveseat
Loveseat
No.
Curved Corner Section
Curved Corner Section
Toss Pillow
4 5
6
5 4
7733
111
1
2
5
6 6
Curved Corner Section,
2
Toss Pillow
Large

Page 7 of 9 E anihCniedaM
10/31/2013
Contents (Ottoman)
Warning and Cautions
DANGER: Please keep children out of the assembly area
during assembly.
CAUTION: Use the
IMPORTANT: Please check the tightness of bolts at least
every 180 days.
Assembly...................................... ................................. 9
Care and maintenance ...............................................7
Warning and Cautions..................................................7
8
Parts................................................................................
ottoman
Care and Maintenance
FRAME
To clean frame, use mild soap and water. Do not use abrasive materials, cleaners or products containing bleach. Rinse
with clean water and dry thoroughly.
To maintain frame, periodically clean thoroughly dry. Drain any water that may have collected inside the frame. Water
not drained and exposed to freezing temperatures may cause damage to the frame tubing. Prior to storing, be sure to
clean and thoroughly dry.
FABRIC
To clean fabric, use mild soap, warm water and a soft cloth. Wipe minor spills immediately. Do not use abrasive
cleaners. The fabric on this set has been treated to resist stains. However, the use of commercially available fabric
cleaners may by necessary.
To maintain fabric, store in a dry space. When not in use, use a commercially available outdoor furniture cover.

Page 8 of 9anihCniedaM E
10/31/2013
.dedulcnierastrapllayfirevotylbmessaotroirpstrapllatuoyalesaelP.elbmessaotelpoep2tsaeltaesU
HARDWARE INCLUDED
Parts Description Quantity
Parts
EE KK MM
Steel washer (M8)KK 4
MM Wrench (M8) 1
EE 4
Bolt (M8x3 )5
PACKAGE CONTENTS
D1 D2
Parts Description Quantity
1
D1
4
D2
Ottoman
Ottoman foot
FOR YOUR SAFETY...
FOR SU SEGURIDAD...
D3
1
D3 Cushion

Page 9 of 9anihCniedaM E
10/31/2013
Assembly
1Attaching the feet to the ottoman
□
Place the ottoman on its side.
Align the foot (D2) to the ottoman (D1).
Attach the feet to the ottoman with four bolts (EE) and four washers (KK) using wrench (MM).
□
□
(Tighten the foot from inside out)
EE
D2 KK
Fully tighten the bolts (EE) .
□
D1
2 Placing the cushion
Place the cushion (D3) onto the ottoman.
□
D3