Pacific Casual Palm Beach 211-WM0-DT-EXT User manual

USE AND CARE GUIDE
Palm Beach Extension Table
[email protected]
Questions, problems, missing parts? Before returning to the store,
call Our Customer Service
7.30 a.m. -5.30 p.m. P ST, Monday - Friday,
Model #211-WM0-DT-EXT
888-445-6690
Ver: 10-08-2021

Table of Contents
Table of Contents .......................................................2
Important Safety Instructions ............................................2
Pre-Assembly........................................................................2
Planning Assembly .................................................................2
Hardware Included.................................................................... 2
Package Contents ......................................................................2
Assembly..... ........................................................................3
.... .
WARNING: Do not stand or sit on the table. Do not put CAUTION: Use the
heavy objects on the table.
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
When using a furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this furnishing.
To reduce the risk of injury to persons:
a) Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
b) Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 10 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not
shown to actual size.
A
AA BB
CC DD BC
Part Description Quantity Part Description Quantity
AA Washer（D10）4ATable top 1
BB Lock washer （D10)
4B Table leg 4
CC Nut (M10) 4C Long bolt （D9*675/M10*40) 4
DD Wrench 1
2
PACKAGE CONTENTS
Operation..... ...................................................................................4

Assembly
1Attaching long bolts 2Attaching table legs
C
DD B
AA
CB
CCBB
CB
A
□Place the table top (A) upside down on a flat, smooth surface.
□Attach one nut (AA) onto each long bolt (C).
□Screw one long bolt into each corner completely.
□Fully tighten the bolt on the corner of the table top using wrench (DD).
□Cover the long bolt (C) with one table leg (B) until the bolt
partially gets out of the table leg.
□Please check each table leg if it fits well with/at each corner
of the table top.
3Securing the table leg 4Turning the table upright
DD
AA
CC
BB
BB
B
B
3
□Put washer (BB), lock washer (CC) and nut (AA) on each long bolt.
□Fully tighten each nut using wrench (DD).

Operation
1 To extend the table top
1.1 1.2
1.3 1.4
2To return to the small table top
2.1 2.2
2.3 2.4
4