Pacific Casual Terra Linda 211-H41-9D User manual

USE AND CARE GUIDE
Terra Linda 9pc Cushioned Dining Set
(Table)
[email protected]
Questions, problems, missing parts? Before returning to the store,
call Our Customer Service
7.30 a.m. -5.30 p.m. P ST, Monday - Friday,
Model #211-H41-9D
888-445-6690
Ver: 10-08-2021

2
Table of Contents
Table of Contents .......................................................2
Important Safety Instructions ............................................2
Pre-Assembly....................................................................3
Planning Assembly ................................................................3
Hardware Included.................................................................. 3
Package Contents .....................................................................3
Assembly..... ........................................................................4
.... .
WARNING: Do not stand or sit on the table. Do not put CAUTION: Use the
heavy objects on the table.
c) This table is not intended to support an umbrella. Umbrellas must have a suitable base or stand.
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
When using a furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this furnishing.
To reduce the risk of injury to persons:
a) Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
b) Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

3
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 10 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not
shown to actual size.
AA CC DD EE
PACKAGE CONTENTS
AB
Part
Description Quantity
A Table top 1
B Table leg 4
Part
Description Quantity
Part Description Quantity
AA
Bolt (M6x16)16
CC Washer
(M6) 16
DD Bolt cap 16
EE Hex wrench (S4) 1

4
Assembly
2
A
1Attaching table legs
□Place the table top (A) upside down on a flat, smooth surface.
□Align the table legs (B) to the table top.
□Attach table legs to the table top with washers and bolts (AA)
using the hex wrench (EE).
□Fully tighten all the bolts and cover them with bolt caps (CC).
Stabilizing the table
IMPORTANT: Please always have an umbrella base ready
if you plan to set an umbrella in the center of the table.
CAUTION: You must remove the umbrella from the table when not in use. Failure to do so may result
in damage to the table top. This type of damage is not considered under the limited warranty.
B
BB
AA
CC
□Turn the table upside down.
□Level the table with foot glides if necessary.