Pacific Casual Griffith Park 14H0405CS-B1 User manual

Assembly Instructions
P
C
Pacific
Casual
LLC
Griffith Park 5-Piece Conversation Set
(48in. Round Chat Table)
Before you start
Please take out the table parts, and carefully remove wrapping
materials. Be careful not to get glass broken.
Check the part list and make sure you have all of the parts before
starting to assemble the products.
Before you start, make sure that you have the right tools in hand.
Keep the assembly instructions for future reference.
Item#: 14H0405CS-B1
Page 1 of 4

Page 2 of 4
Part List
A1
1
4B
C
D
E
Table Rim
Table Leg
Bolt(M6x15)
Leg
Connector
Bracket
16
1
F
G16
Ref# Description Illustration Qty
Metal
Washer
Bolt Cap
Hex
Wrench
8
Bolt(M6x25) 8
H

Step 1 :
Attach four table legs (B) to leg connector bracket (C) with eight washers (F) and
eight bolts (E) to form a table base. Hand tighten bolts only until the end of step 2.
Place the table top (A) upside down on a flat, smooth surface.
Important: Each bolt should be tightened a few revolutions at a time, alternating
between bolts in a cross corner (X) pattern. This will ensure your table is level by placing
equal pressure on all bolt joints. Do not over tighten.
Step 2 :
Attach each table leg (B) to the table top (A) with two washers (F) and two bolts (D).
Completely tighten all the bolts (D,E) using wrench (H).
B
C
B
C
F
E
B
A
C
B
A
D
F

Turn the table upright.
Your table is now ready for use.
Call between 7:30am to 4:30pm P.S.T
(Monday to Friday )
Pacific Casual LLC
1060 Avenida Acaso,
Camarillo, Ca 93012
Toll Free Number: [phone]
[email protected]
Item#: 14H0405CS-B1
Customer Service:
Step 3:
Step 4:
Cover all the bolts (D,E) with the bolt caps (G).
G
G
Adjust the foot glides to level the table.
Page 4 of 4