Pacific Casual Rushreed 143-0349D-B3 User manual

Assembly Instructions
P
C
Pacific
Casual
LLC
Rushreed 9 Piece Patio Dining Set
Before you start
Please take out the chair parts, and carefully remove wrapping
materials. Be careful not damage the weaves.
Check the part list and make sure you have all of the parts before
starting to assemble the products.
Before you start, make sure that you have the right tools in hand.
Keep the assembly instructions for future reference.
Item#:
143-0349D-B3
Page 1 of 4
(2 Piece Swivel Rockers）

Page 2 of 4
Parts List
A2
8
2
B
C
D
E
Washers
Seat and Back
Chair Base with
FRP Plate
Bolt （N8x40）
8
F16
Ref# Description Illustration Qty
Washer Plate
16
Spring Washer
GNut
HWrench
8
2
I
J
Bolt Cap 16
16
Nut Cap
F16
Spring Washer
GNut
HWrench
8
1
I
J
Bolt Cap 16
16
Nut Cap
KWrench 1
A2
8
2
B
C
D
E
Washers
Seat and Back
Chair Base with
FRP Plate
Bolt （N8x45）
8
F16
Ref# Description Illustration Qty
Washer Plate
16
Spring Washer
GNut
HWrench
8
1
I
J
Bolt Cap 16
16
Nut Cap
KWrench 1

Step 2 :
Place the chair base (B) upside down on a smooth flat surface.
E
D
F
G
C
F
D
E
Step 1 :
From under the U-bar (2) of the chair base (B) attach seat and back (A) to the chair base (B)
with washer plates (E), washers (D), spring washers (F) and bolts (C) from below U-bar (1)
of the seat and back (A), and with washers (E), spring washers (D), spring washers (F) and
nuts (G) from above U-bar (1). You may need to loosen pre-installed bolts on U-bar (2) if
chair base (B) cannot properly aligned to seat and back (A). Fully tighten all bolts(C) and
nuts (G) when all bolts are in location. Cover all bolts with bolt covers (I), and cover all nuts
with nut caps (J). This also applies to pre-installed bolts and nuts.
1
2
I
J
of the seat and back (A), and with washers plates (E), washers (D), spring washers (F) and

Step 3 :
Call between 7:30am to 4:30pm P.S.T
(Monday to Friday )
Pacific Casual LLC
1060 Avenida Acaso,
Camarillo, Ca 93012
Toll Free Number: [phone]
[email protected]
Item#: 1 43-0349D-B3
Customer Service:
Page 4 of 4
Turn the chair upright.
Repeat step 1 to 3 for the other chair.