Pakedge NK-1 User manual

NK-1
Wireless Access Point Controller/
Network Cloud Patroller
QUICK START GUIDE

22
NK-1 Package contents
Your NK-1 includes a Wireless Access Point Controller and a Network Patroller. Refer to the Access
Points label on the package to determine the number of access points the controller can manage.
Default Settings
IP Address: 192.168.1.240
Username/Password: pakedge/pakedgen

33
Access Point’s
Installing the NK-1
Tools required:
• Phillips screwdriver (if using rack-mount brackets)
• Computer with Ethernet interface and a web browser (an integrated DB-9 port or USB-to-
Serial adapter may be necessary if you would like to use the console interface.)
• Ethernet cable
Installation
1 Open the box and remove the NK-1.
2 If mounting the NK-1 in a standard 19” AV rack, attach the included rack-mount brackets
to the sides of the NK-1. If not
mounting to a rack, ensure that
the NK-1 is physically mounted
near power and network
connections (such as a backbone
switch or rewall/router).
3 Connect power to the device.
4 Connect an Ethernet cable from your
computer to the LAN port on the NK-1.
You are now ready to congure the NK-1 to an IP
address that matches your network.

44
Logging in
The NK-1-CP includes both the NK-1-NP Network Cloud Patroller and the NK-1-CG1 Wireless
Access Point.
1 Connect the NK-1 to power and press the power switch on the rear panel. The PWR LED will
light up.
2 Connect a computer to the NK-1 through an Ethernet cable. Enter 192.168.1.240 into the
address bar of your web browser. A login page opens.
3 In the username box, type pakedge. In the password box, type pakedgen, then click Login.

55
The Dashboard appears. The NK-1-CP Dashboard lets you navigate to the NK-1-NP Network
Cloud Patroller and the NK-1-CG1 Wireless Controller.
4 To congure Wireless, see “Conguring the Wireless Access Point Easy Wizard” on
page 6. To access the Patroller, see “Navigating to the Patroller Dashboard” on
page 6.

66
Conguring the Wireless Access Point Easy Wizard
The Wizard will discover, manage, and congure your access points (APs), making it a quick and
easy tool to get your wireless network up and running.
To run the Wizard:
1 In the Dashboard, click NK-1-CG1.
2 If this is your rst time logging in to the controller, you will be prompted to run the Wizard.
Otherwise, hover over the Wizard menu and click Run Wizard.
3 Click Start the Easy Wizard to begin the wizard setup.
4 For more information on using your NK-1, see the Bakpak User Guide.
Navigating to the Patroller Dashboard
To navigate to the Patroller Dashboard:
1 In the main NK-1-CP Dashboard, click NK-1-NP. The Patroller Dashboard appears.

77
Creating a Bakpak Cloud Account from the cloud
1 Open a web browser and enter the following URL: https://mybakpak.com
2 Click [Create a] Dealer Admin Account.
The Register for mybakpak page opens.
3 Follow the on-screen instructions to get your Dealer Code.
4 Enter your email address, new password, time zone, and Dealer Code, then click Register.

Technical Support
For technical help:
www.pakedge.com/portal
[e-mail]
[phone]
For non-technical inquires:
[e-mail]
[phone]
For regulatory information:
www.pakedge.com/regulatory
DOC-00230-C 2016-10-14 MS
11734 Election Road, Draper, UT 84020
Main: [phone] Fax: [phone]
www.pakedge.com
[email protected]
©2016 Pakedge Device & Software Inc. All rights reserved.