Panacom SP-1830 User manual

SP-1830 USER MANUAL

Pg. 3
SP-1830 MONSOON TOWER PORTABLE SPEAKER
User’s Guide
Thank you for purchasing Panacom’s SP-1830.
Please read the manual carefully before operating.
PRECAUTIONS
In order to prevent operating problems or serious damage to the
device, please comply with the following remarks.
1. Hold the electric outlet while pulling out the plug.Do not pull the wire.
2. Operating audio appliances should be kept away from heating sources.
4. Do not touch the internal parts, otherwise electric shock or serious dam-
age might occur.
5. Place this speaker in a ventilated dry condition with about 20mm of
space around other surfaces for heat dispersion.
WARNING: Do not expose this appliance to rain or moisture or liquids.
SPECIFICATIONS
- BT Connection
- TWS-True Wireless Stereo
- FM Radio
- Remote Control
- 2 Mic inputs
- Led Display Screen
- USB/SD Card slot
- Equalizer
- X-Bass volume control
- Frequency response: 40Hz-20KHz
- Impedance: 4
- Sensitivity: 93dB+3dB

Pg. 4
FRONT PANEL FUNCTIONS
1. MODE: Choose the desired input USB/SD/Line/BT
2. NEXT: Play next track
3. PREV: Play previous track
4. Equalizer: Move to adjust to your desired sound
5. USB port
6. SD card port
7. Mic BASS: Move to increase or decrease BASS
8. Mic TREBLE: Move to increase or decrease TREBLE
9. M. Volume: Move to increase or decrease Mics volume
10. X-BASS: Move to increase or decrease extra BASS
11. Led Display
12. Power Switch: Press to turn ON or OFF the speaker
13. Mic 1 & Mic 2: Connect the Mics in these outlets
14. Mic Delay: Move to increase or decrease Mics delay
15. Mic Echo: Move to increase or decrease Mics echo
16. Master Volume: Move to increase or decrease Master volume
REMOTE CONTROL FUNCTIONS

Pg. 5
BT CONNECTION PAIRING
Press the MODE button until the word “BLUE” appears in the Led display.
The BT connection blue light will blink and the speaker will give an alarm.
Ensure you enable the BT Function in your device, search for the SP-1830
model in the list of your device and select it.
BACK PANEL CONNECTIONS
TWS CONNECTION (TRUE WIRELESS STEREO)
STEP 1 Push the Mode Button on both speakers until speakers
are in BT Mode. Screen will display the word “BLUE”.
STEP 2 When both speakers are in BT mode, push and
hold the TWS button for 3 seconds. You will hear a beep & screen
display “bt/btst”. Next time you put both speakers in BT mode at the
same time, speakers will connect automatically.
STEP 3 On your device, turn your BT settings “ON”, you will
then select the unit and pair. Enjoy TWS (True Wireless Stereo) sound
from your phone via BT!

Pg. 6
INTERNATIONAL WARRANTY
Terms and Conditions
1. Panacom warrants the operation of this product to be free from
any manufacturing and/or material defect for a period of 6 months
from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement of this
product, according to our own criterion, free of charge within the
stipulated term and it does not extend to consequential or incidental
damages to other products that may be used with this unit.
3. The warranty shall be voided in the following cases: a) repair or
attempt to repair by third parties not authorized by the company. b)
,sgulp,selbacnoitcennocnitucfoepytynagnimrofrepfoesacni
connectors, or other adapters different from the original ones
provided by the company.
4. To make this warranty effective, you shall contact the Authorized
Service Center of your country and they shall carry out the pertinent
procedure. In order to start the necessary procedure to get said
warranty, you shall hand in the Original Purchase Invoice where
stated clearly.
,ynafi,sesnepxeecnarusniro/dnayats,thgierf,noitatropsnarT.5
are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.

www.panacom.com