Panasonic HG-S Series User manual

2019.12 panasonic.net/id/pidsx/global
Contact-Type Digital Displacement Sensor
HG-S Series
User's Manual
WUME-HGS-6

© Panasonic Industrial Devices SUNX Co., Ltd. 20192
(MEMO)

© Panasonic Industrial Devices SUNX Co., Ltd. 2019 3
Thank you for purchasing an contact-type digital displacement sensor HG-S series.
Before using this product, read and understand this User's Manual. Use the product correctly
and in the optimum manner.
Keep this manual in a safe location for reference whenever necessary.
Please note
1) Unauthorized reproduction of part or all of this manual is prohibited.
2) The contents of this manual are subject to change without notice.
3) This manual has undergone strict quality control procedures; however, in the event that you
discover any problems or points of concern, please contact your local dealer.

© Panasonic Industrial Devices SUNX Co., Ltd. 20194
Contents
Chapter 1 INTRODUCTION····························································· 1-1
1-1 Safety Cautions ······························································ 1-2
1-2 Safety Information ···························································· 1-2
Chapter 2 BEFORE USING THIS PRODUCT······································ 2-1
2-1 Contents of Package ························································· 2-2
2-2 System Conguration ························································ 2-6
2-3 Description of Parts ·························································· 2-7
2-3-1 Controller············································································· 2-7
2-3-2 Sensor Head (Regular Type) ··················································· 2-9
2-3-3 Sensor Head (Air-Driven Type)················································· 2-9
2-3-4 Sensor Head Connection Cable ··············································· 2-10
Chapter 3 INSTALLATION AND CONNECTIONS································· 3-1
3-1 Mounting the Controller ······················································ 3-2
3-1-1 Mounting on a DIN Rail ·························································· 3-2
3-1-2 Removing from a DIN Rail······················································· 3-2
3-2 Attaching the Sensor Head ·················································· 3-3
3-3 Wiring the Controller Connector on the Sensor Head Connection Cable
3-5
3-3-1 Disassembly Procedure·························································· 3-5
3-3-2 Wiring Procedure ·································································· 3-5
3-4 Connecting the Controller and Sensor Head ······························ 3-7
3-4-1 Attaching the Sensor Head and Sensor Head Connection Cable ····· 3-7
3-4-2 Removing the Sensor Head and Sensor Head Connection Cable···· 3-8
3-4-3 Connecting the Air Tube (Air-Driven Type Only) ··························· 3-9
3-4-4 Disconnecting the Air Tube (Air-Driven Type Only) ······················· 3-9
3-4-5 Air Circuit (Recommended) (Air-Driven Type Only) ······················· 3-10
3-4-6 Attaching the Controller and Sensor Head Connection Cable ········· 3-11
3-4-7 Removing the Controller and Sensor Head Connection Cable ········ 3-11
3-5 Connecting Controllers······················································· 3-12
3-5-1 Connection Method ······························································· 3-13
3-5-2 Removal Method··································································· 3-15
3-6 Connection Diagrams and I/O Circuit Diagrams··························· 3-16
3-6-1 Connection Diagrams····························································· 3-16
3-6-2 I/O Circuit Diagrams······························································· 3-18
Chapter 4 BASIC OPERATION ························································ 4-1
4-1 Explanation of Basic Operation ············································· 4-2
4-1-1 From Power ON to Mode Selection ··········································· 4-2
4-1-2 Operation Keys and Display ···················································· 4-3
4-2 Explanation of Modes ······················································· 4-5
4-2-1 Display Switching Mode·························································· 4-5
4-2-2 Presets ··············································································· 4-8
4-2-3 Teaching Mode ····································································· 4-11
4-2-4 Bank Mode ·········································································· 4-20
4-2-5 Key Lock ············································································· 4-24

© Panasonic Industrial Devices SUNX Co., Ltd. 2019 5
4-3 Self-monitoring Function ····················································· 4-26
4-3-1 Using the Self-monitoring Function ··········································· 4-26
4-3-2 Statuses and Measures ·························································· 4-27
Chapter 5 FUNCTION SETTINGS ···················································· 5-1
5-1 Overview of Setting Menu ··················································· 5-4
5-1-1 Menu Structure ····································································· 5-4
5-1-2 Data Flow ············································································ 5-6
5-1-3 Setting Items and Default Values ·············································· 5-7
5-2 Basic Settings ( ) ······················································ 5-10
5-2-1 HIGH Set Value ( )························································· 5-11
5-2-2 LOW Set Value ( ) ························································· 5-12
5-2-3 Hysteresis ( ) ······························································ 5-13
5-2-4 Teaching Types ( )························································· 5-15
5-2-5 Tolerance <±> ( ) ·························································· 5-17
5-2-6 Preset Value ( ) ····························································· 5-18
5-2-7 Preset Data Selection ( )················································· 5-19
5-2-8 Preset Save ( )···························································· 5-20
5-2-9 Measurement Direction ( ) ············································· 5-21
5-2-10 Lever Ratio ( )····························································· 5-23
5-2-11 Response Time ( )························································ 5-24
5-2-12 Output Operation ( ) ··················································· 5-26
5-3 Advanced Settings ( ) ··············································· 5-27
5-3-1 Hold Setting ( ) ······························································· 5-28
5-3-2 Input All ( ) (Master Unit Only) ········································ 5-53
5-3-3 External Input ( ) ··························································· 5-55
5-3-4 External Output ( ) ······················································· 5-57
5-3-5 Number of Digits Displayed ( )·········································· 5-60
5-3-6 Analog Scaling ( ) ························································ 5-61
5-3-7 Scaling Upper Limit Value / Scaling Lower Limit Value ( / ) ·· 5-63
5-3-8 Eco Mode ( ) ···································································· 5-66
5-3-9 Alarm Setting ( ) ···························································· 5-67
5-4 Calculation Settings ( ) (Master Unit Only) ··························· 5-76
5-4-1 Calculation Mode ( )························································· 5-77
5-4-2 Calculation Application Selection ( ) ·································· 5-78
5-5 Copy Settings ( ) ························································ 5-85
5-5-1 Copy select individual ( ) (Master Unit Only) ······················ 5-87
5-5-2 Copy Select All ( ) (Master Unit Only) ······························· 5-89
5-5-3 Copy Execution ( ) (Master Unit Only)······························ 5-90
5-5-4 Copy Lock ( ) (Slave Units Only)········································· 5-91
5-6 Bank Settings ( )························································· 5-92
5-6-1 Bank Save Setting ( ) ··················································· 5-92
5-7 Calibration Settings ( ) ················································ 5-94
5-7-1 Calibration Selection ( ) ················································ 5-94
5-8 Initialization ( ) ························································· 5-98
5-9 Maintenance ( )······················································
5-100
Chapter 6 SPECIFICATIONS ··························································· 6-1
6-1 Specications ································································· 6-2
6-2 Dimensions···································································· 6-8

© Panasonic Industrial Devices SUNX Co., Ltd. 20196
Chapter 7 Appendix ······································································· 7-1
7-1 Maintenance and Inspection ················································ 7-2
7-1-1 Maintenance Cautions···························································· 7-2
7-1-2 Main Inspection Items ···························································· 7-2
7-2 Replacing the Probe·························································· 7-3
7-3 Replacing the Rubber Bellows (Regular Type Only) ······················ 7-4
7-4 Replacing the Seal Cap (Air-Driven Type Only) ··························· 7-6
7-4-1 How to Remove the Seal Cap ·················································· 7-6
7-4-2 How to Mount the Seal Cap····················································· 7-6
7-5 Error Messages······························································· 7-7
7-6 Troubleshooting······························································· 7-8

1-1
Chapter 1 INTRODUCTION
1-1 Safety Cautions ······································································· 1-2
1-2 Safety Information····································································· 1-2

INTRODUCTION
© Panasonic Industrial Devices SUNX Co., Ltd. 20191-2
1-1 Safety Cautions Always observe
This section explains important rules that must be observed to prevent human injury and prop-
erty damage.
■ The hazards that may occur if the product is used incorrectly are described and classied by
level of harm.
WARNING Risk of death or serious injury.
CAUTION Risk of minor injury or property damage.
■ The following symbols are used to indicate safety information that must be observed.
Indicates an action that is prohibited.
Indicates an action that must be taken.
Indicates a matter that requires caution.
<Reference> Indicates supplemental information.
1-2 Safety Information
WARNING
●Never use this product as a sensing device for personnel protection.
●When using sensing devices for personnel protection, use products that meet the laws and stan-
dards for personnel protection that apply in each region or country, such as OSHA, ANSI and IEC.
CAUTION
●For the controller DC power supply, only use a power supply that is isolated by means of an isola-
tion transformer or otherwise.
●Risk of short-circuiting and damage to the controller or power supply if a transformer such as an
auto transformer is used. Risk of short-circuiting and damage to the controller or power supply if in-
correctly mounted or connected.
●The controller HG-SC series is designed to be used with the special sensor head HG-S series. If
used with other than the special sensor head option, the specications will not be met and product
malfunctioning or damage may occur.

INTRODUCTION
© Panasonic Industrial Devices SUNX Co., Ltd. 2019 1-3
Specications
●This device has been developed / produced for industrial use only.
●This product uses an EEPROM. The EEPROM has a service life of one million setting operations.
● Do not use this product outside the range of the specications. Risk of an accident and prod-
uct damage. There is also a risk of a noticeable reduction of service life.
●Deviations may occur in the judgment value at the bottom dead point. Do not use the bottom
dead point as a standard.
Power
● Verify that the supply voltage uctuations are within the rating.
●If power is supplied from a commercial switching regulator, ensure that the frame ground
(F.G.) terminal of the power supply is connected to an actual ground.
●Do not use during the initial transient time after the power supply is switched ON.
Wiring
●Make sure that the power supply is OFF while performing wiring or expansion work on the
controller.
●Take care that short-circuit of the load or wrong wiring may burn or damage the product.
●After you have completed wiring work, check the wiring carefully before switching on the power.
●Do not wire in parallel with a high-voltage line or power line, or run through the same conduit.
Risk of malfunctioning due to induction.
●Do not apply stress such as excessive bending or pulling to the extracted part of a cable.
●
When attaching the sensor head connection cable to this product, do not apply force to the product.
Usage environment
●This product is suitable for indoor use only.
●Avoid dust, dirt, and steam.
●Do not use this sensor in places where it may come in contact with corrosive gas, etc.
●Ensure that the product does not come into contact with organic solvents such as thinner.
●Ensure that the product does not come into contact with strong acid or alkaline.
●Ensure that the product does not come into contact with oil or grease.
● This product cannot be used in an environment containing ammable or explosive gases.
● Performance may not be satisfactory in a strong electromagnetic eld.
●
This product is a precision device. Do not drop or otherwise subject to shock. Risk of product damage.
●Ensure that strong horizontal force is not applied to the spindle. This may cause loss of accu-
racy and decreased durability.
Handling (Regular type)
●Never remove the standard rubber bellows except for replacement. Risk of product damage
due to inltration by dust, water, or other contaminants.
●The standard rubber bellows is a consumable part. Replace it regularly as a preventive main-
tenance.The rubber bellows can deteriorate quickly depending on usage environment. If it
deteriorates, it generates cracks and other problems,causing dust and water to enter and re-
sulting in a malfunction.
Handling (Air-driven type)
●Mount a pressure-reducing valve to use the product within the allowable working pressure
range. Excessive pressure may result in failure or damage.
●Do not use air containing dust, water, oil, or other foreign matter. Doing so may result in elec-
tric shock or failure. To prevent such problems, take appropriate measures such as installing
air lters or mist separators.
●Do not use air containing foreign objects (such as carbon powder or dust), water, or oil. Do-
ing so may result in electric shock or failure. To prevent such problems, take appropriate
measures such as mounting air lters or mist separators.

© Panasonic Industrial Devices SUNX Co., Ltd. 20191-4
Other matters
●Never attempt to disassemble, repair, or modify the product.
●When the product becomes unusable or unneeded, dispose of the product appropriately as
industrial waste.