Panasonic MAZDxxxG Series User manual

Zener Diodes
1
Publication date: November 2007 SKE00036AED
This product complies with the RoHS Directive (EU 2002/95/EC).
MAZDxxxG Series
Silicon planar type
For constant voltage, constant current,
waveform clipper and surge absorption circuit
■Features
•Low noise type
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Rating Unit
Repetitive peak forward current IFRM 200 mA
Total power dissipation *PT120 mW
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
■Common Electrical Characteristics Ta=25°C ±3°C *1
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 5 MHz.
3. *1: The temperature must be controlled 25°C for VZmesurement.
VZvalue measured at other temperature must be adjusted to VZ(25°C)
*2: VZguaranteed 20 ms after current flow.
Note) *:P
tot =100 mW achieved with a printed circuit board
Parameter Symbol Conditions Min Typ Max Unit
Forward voltage VFIF=10 mA 0.9 1.0 V
Zener voltage *2VZIZSpecified value V
Zener operating resistance RZIZSpecified value Ω
Reverse current IRVRSpecified value µA
Refer to the list of the
electrical characteristics
within part numbers
■Package
•Code
SSSMini2-F3
•Pin Name
1: Anode
2: Cathode
■Marking Symbol
Refer to the list of the electrical
characteristics within part numbers

2
MAZDxxxG Series
SKE00036AED
This product complies with the RoHS Directive (EU 2002/95/EC).
Marking
symbol
MAZD024G0L 2.28 2.40 2.60 5 120 1.0 100 5 1F
MAZD027G0L 2.50 2.70 2.90 5 120 1.0 110 5 2F
MAZD030G0L 2.80 3.00 3.20 5 50 1.0 120 5 3F
MAZD033G0L 3.10 3.30 3.50 5 20 1.0 130 5 4F
MAZD036G0L 3.40 3.60 3.80 5 10 1.0 130 5 5F
MAZD039G0L 3.70 3.90 4.10 5 10 1.0 130 5 6F
MAZD043G0L 4.00 4.30 4.60 5 10 1.0 130 5 AF
MAZD047G0L 4.40 4.70 5.00 5 2.0 1.0 80 5 HF
MAZD051G0L 4.80 5.10 5.40 5 1.0 2.0 60 5 BF
MAZD056G0L 5.30 5.60 6.00 5 0.5 2.5 40 5 CF
MAZD062G0L 5.80 6.20 6.60 5 0.2 4.0 30 5 DF
MAZD068G0L 6.40 6.80 7.20 5 0.1 4.0 20 5 WF
MAZD075G0L 7.00 7.50 7.90 5 0.1 5.0 20 5 TF
MAZD082G0L 7.70 8.20 8.70 5 0.1 5.0 20 5 EF
MAZD091G0L 8.50 9.10 9.60 5 0.1 6.0 20 5 FF
MAZD100G0L 9.40 10.00 10.60 5 0.05 7.0 30 5 GF
MAZD110G0L 10.40 11.00 11.60 5 0.05 8.0 30 5 JF
MAZD120G0L 11.40 12.00 12.70 5 0.05 9.0 30 5 KF
MAZD130G0L 12.40 13.00 14.10 5 0.05 10.0 35 5 LF
MAZD150G0L 13.90 15.00 15.60 5 0.05 11.0 40 5 MF
MAZD160G0L 15.30 16.00 17.10 5 0.05 12.0 50 5 NF
MAZD180G0L 16.90 18.00 19.10 5 0.05 13.0 60 5 PF
MAZD200G0L 18.80 20.00 21.20 5 0.05 15.0 80 5 RF
MAZD220G0L 20.80 22.00 23.30 5 0.05 17.0 80 5 SF
MAZD240G0L 22.80 24.00 25.60 5 0.05 19.0 100 5 UF
MAZD270G0L 25.10 27.00 28.90 2 0.05 21.0 120 2 VF
MAZD300G0L 28.00 30.00 32.00 2 0.05 23.0 160 2 XF
MAZD330G0L 31.00 33.00 35.00 2 0.05 25.0 200 2 YF
MAZD360G0L 34.00 36.00 38.00 2 0.05 27.0 250 2 ZF
MAZD390G0L 37.00 39.00 41.00 2 0.05 30.0 300 2 7F
■Electrical Characteristics within Part Numbers Ta=25°C ±3°C
VZ (V) IR (µA) RZ (Ω)
IZVRIZ
Min Nom Max (mA) Max (V) Max (mA)
Part number
Zener voltage Reverse current Zener operating
resistance

MAZDxxxG Series
3
SKE00036AED
This product complies with the RoHS Directive (EU 2002/95/EC).
016
0
40 12080
0
200
150
100
50
Total power dissipation P
T
(mW)
Ambient temperature T
a
(°C)
Glass epoxy board
10
−3
04 812
10
−2
10
−1
1
10
10
3
10
2
Zener voltage VZ(V)
Zener current IZ(mA)
4.7 V 5.1 V 5.6 V 6.2 V 6.8 V 7.5 V 8.2 V 9.1 V
10 V
T
a
=25°C
10
−3
0102030
10
−2
10
−1
1
10
10
3
10
2
11 V 12 V 13 V 14 V 15 V 16 V 18 V 20 V
T
a
=25°C
Zener voltage VZ(V)
Zener current I
Z
(mA)
10
−3
0204060
10
−2
10
−1
1
10
10
3
10
2
22 V 24 V 27 V 30 V 33 V 36 V 39 V
T
a
=25°C
Zener voltage VZ(V)
Zener current I
Z
(mA)
PTTaIZVZIZVZ
IZVZIZVZ
10−3
02 4
6
10−2
10−1
1
10
103
102
Zener voltage VZ(V)
Zener current IZ(mA)
2.7 V 3.0 V 3.3 V 3.6 V 3.9 V 4.3 V 2.4 V
Ta=25°C

4
MAZDxxxG Series
SKE00036AED
This product complies with the RoHS Directive (EU 2002/95/EC).
SSSMini2-F3 Unit: mm
1.40 ±0.05
0.27 +0.05 −0.03
2
1
0.60 ±0.05
1.00 ±0.05
0.52 ±0.03
0 to 0.05
(5°)
(0.27)
0.13 +0.05 −0.02
(5°)
0.20 ±0.05

Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.