Panasonic ER-CTB1 User manual

Printed in Thailand
ER9210CTB13111
E0422-0
Panasonic Corporation
https://www.panasonic.com
© Panasonic Corporation 2022
FEN
Maintenance
How to clean
• Make sure that the main body is turned off.
• After cleaning, store the brush with the
protective cap attached.
1 Remove the head and brush.
2
Rinse them with running water. (Fig. 6)
▪Thoroughly rinse the inner and
bottom of brush.
3 Wipe off the water with a dry cloth
and dry it well.
Note
• Note the following precautions to avoid
malfunction and damage.
• Do not forcefully pull or force apart
the bristles on the brush.
• Do not wash the brush with water
over 80 °C.
• Do not damage or rub the waterproof
rubber seal (c) with hard materials.
• Do not wash the head with water
over 40 °C.
• Do not immerse the appliance in
water for a long time.
• Do not hit the appliance on the sink
or any other object while removing
the water.
• Do not dry the appliance with a dryer
or a fan heater.
• Do not wipe with thinner, benzine,
alcohol etc.
Replacement parts
Replacement part is available at your
dealer or Service Centre.
•Coloridenticationlabelsareincluded
in the brush replacement package. The
labels can be attached on the brush to
identify users when they share the
same toothbrush head.
Multi-tbrush ER-6CT01
Extra-nebrush ER-6CT02
Specications
Airborne Acoustical Noise
53 (dB (A) re
1 pW)
This product is intended for household
use only.
ER-CTB1_UK_PR.indd 2 2022/02/28 19:17:05