Panasonic KX-FP701CX User manual

© 2008 Panasonic Communications Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
ORDER NO. KMF0801403SE
Plain Paper Fax with Copier
Model No. KX-FP701CX
KX-FP702CX
(for Asia and Middle Near East)
TABLE OF CONTENTS PAGE
1 REPLACEMENT PARTS LIST--------------------------------- 2
1.1. REFERENCE CHART------------------------------------ 2
1.2. ORIGINAL AND NEW PARTS COMPARISON
LISTS--------------------------------------------------------- 2
2 CORRECTION------------------------------------------------------ 3
2.1. Block Diagram---------------------------------------------- 3
2.2. Sensors and Switches------------------------------------ 4
2.3. Program Mode Table ------------------------------------- 5
2.4. Power Supply Board Section--------------------------- 6
2.5. Check the Cover Open Sensor (SW502)------------ 8
2.6. Maintenance Check Items/Component
Locations ---------------------------------------------------- 8
3 CHANGES----------------------------------------------------------- 9
3.1. Power Supply Board Parts------------------------------ 9
4 ADDITIONS --------------------------------------------------------10
4.1. Service Function Table----------------------------------10
4.2. Program Mode Table ------------------------------------10
Please file and use this supplement manual together with the service manual for Model No.KX-FP701CX/
KX-FP702CX, Order No.KMF0708102CE.

2
KX-FP702CX/KX-FP702CX
1 REPLACEMENT PARTS LIST
1.1. REFERENCE CHART
1.2. ORIGINAL AND NEW PARTS COMPARISON LISTS
 Change of the Suffix Code
Serial No.Label tells you the suffix code as follows.
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
1. Improve performance *a: To enhance the quality.
*c: To share the parts with other models.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Suffix Code Reasons of change
A →B To change software version and checksum.
B →C Head holder modification for printing light countermeasure.
Ref. No. Part No. Part Name & Description Pcs/
Set Remarks Notes Time of Change
Original (Old) New (Suffix)
OPERATION PANEL SECTION
1 PFGV1022Z PFGV1022Y TRANSPARENT PLATE 1 *a 1 W ---
UPPER CABINET SECTION
93 PFHR1715Z PFHR1715Y GUIDE, HOLDER HEAD/L 1 *a 1 W B to C
94 PFHR1716Z PFHR1716Y GUIDE, HOLDER HEAD/R 1 *a 1 W B to C
DIGITAL BOARD PARTS (for KX-FP701CX)
IC6 PFWIFP701CX PFWIFP701CX1 IC (ROM) (Change 1)
[Program Ver. GB21CN →GB21CP] 1 *a 1 W A to B
IC6 PFWIFP701CX1 PFWIFP701CX2 IC (ROM) (Change 2)
[Program Ver. GB21CP →GB21CQ] 1*a1W ---
DIGITAL BOARD PARTS (for KX-FP702CX)
IC6 PFWIFP702CX PFWIFP702CX1 IC (ROM) (Change 1)
[Program Ver. GBG1CN →GBG1CP] 1 *a 1 W A to B
IC6 PFWIFP702CX1 PFWIFP702CX2 IC (ROM) (Change 2)
[Program Ver. GBG1CP →GBG1CQ] 1*a1W ---
INTERFACE BOARD PARTS
F401, F402 K5H122200005 K5H122Y00002 FUSE 2 *c 4 V ---

3
KX-FP702CX/KX-FP702CX
2 CORRECTION
2.1. Block Diagram
[Changed from original section “6.3.1. Block Diagram”]

4
KX-FP702CX/KX-FP702CX
2.2. Sensors and Switches
[Changed from original section “6.5. Sensors and Switches”]

5
KX-FP702CX/KX-FP702CX
2.3. Program Mode Table
[Changed from original section “12.4.2. Program Mode Table”]

6
KX-FP702CX/KX-FP702CX
2.4. Power Supply Board Section
[Changed from original section “12.5.7.2. Troubleshooting Flow Chart”]

7
KX-FP702CX/KX-FP702CX
[Added into original section “12.5.7. Power Supply Board Section”]

8
KX-FP702CX/KX-FP702CX
2.5. Check the Cover Open Sensor (SW502)
[Changed from original section “12.5.9.3. Check the Cover Open Sensor (SW502)”]
2.6. Maintenance Check Items/Component Locations
[Changed from original section “15.1.2. Maintenance Check Items/Component Locations”]

9
KX-FP702CX/KX-FP702CX
3 CHANGES
3.1. Power Supply Board Parts
[Changed from original section “20.2.5. Power Supply Board Parts”]

10
KX-FP702CX/KX-FP702CX
4ADDITIONS
4.1. Service Function Table
[Added into original section “11.1.3. Service Function Table”]
4.2. Program Mode Table
[Added into original section “12.4.2. Program Mode Table”]
K.T.
KXFP701CX
KXFP702CX