Panasonic EH-HW11 User manual

© Panasonic Electric Works (Thailand) Co., Ltd.
2010. All rights reserved. Unauthorized copying and
distribution is a violation of law.
Order Number PEWT1007A89CE
(Household) Multi-styling Straightener
Model No. EH-HW11
EH-HW32
EH-HW51
ASIA
TAIWAN
TABLE OF CONTENTS
PAGE PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 5
5 Wiring Connection Diagram ---------------------------------10
6 Schematic Diagram ---------------------------------------------10
7 Exploded View and Replacement Parts List -----------11

2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications

3
3 Troubleshooting Guide
(Refer to Wiring Connection Diagram)

4

5
4 Disassembly and Assembly Instructions
4.1. Disassembly Instructions
1. Remove Shaft Cover from Main Body by Slotted screw-
driver(Minus driver).
2. Remove Torx screws at Shaft position by Phillips screw-
driver(Plus driver).
3. Push Shaft out by tiny-shaped Phillips screwdrivers (Plus
driver) and pull it out from the main body.
4. Remove Pivot spring by gripping and pulling it out from
the Main body.
5. Remove 6 Screws for fitting Press plate side by Phillips
screwdrivers(Plus driver).
6. Press plate cover at the Hook part by Slotted screwdriver
(Minus driver), as shown in Figure below.

6
7. Remove Lock Button and Lock Button Spring.
8. Remove Iron Plate of Heater B from Hook.
9. Remove Slide Plate and Slide Spring.
10. Take off Press Plate.
11. Remove 2 Screws of the Housing side by Phillips screw-
driver(Plus driver).
12. Remove 6 Screws by Phillips screwdriver (Plus driver).

7
13. Remove Housing A from Housing B in Grip Case as fol-
lowing the drawing.
14. Take off Iron Plate and Circuit assembly b/k from Hous-
ing B.

8
4.2. Assembly and Disassembly Points
1. Shaft Cover fixing point.
2. Housing B Assembly Point.

9
4.3. Lead wire of Iron Plate(Heater A, Heater B) and Circuit arrangement
points.
1. Lead wire of Iron Plate(Heater A assembly b/k) and Circuit assembly b/k arrangement follows as below.
2. Lead wire of Iron Plate(Heater B assembly b/k) arrangement follows as below.
3. Shaft cover must have a control direction.

10
5 Wiring Connection Diagram
6 Schematic Diagram

Model No. : EH-HW11 Exploded View for EH-HW11
7 Exploded View and Replacement Parts List

Model No. : EH-HW11 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
EH-HW11
1 EHHW11HSABW HOUSING A ASSEMBLY BLOCK 1
2 EHHW11FSW FLOATING SPRING 4 *1
3 EHHW11HABW HEATER A ASSEMBLY BLOCK 1
4 EHHW11PKW PACKING 1
5 EHHW11CCAW CIRCUIT ASSEMBLY BLOCK 1 (INCLUDE 1 INSULATION TUBE,CONNECTOR COV
ER BLOCK)
6 EHHW11CTBW CONNECTOR COVER BLOCK 1
7 EHHW11PCA2W POWER CORD 1 A2-PLUG, TAIWAN
7 EHHW11PCB2W POWER CORD 1 B2-PLUG, OTHERS
7 EHHW11PC7B2W POWER CORD 1 B2-PLUG, KOREA
7 EHHW11PCS3W POWER CORD 1 S3-PLUG
8 EHHW11HSBB1W HOUSING B 1 TAIWAN
8 EHHW11HSBBW HOUSING B 1 OTHERS
8 EHHW11HSBB6W HOUSING B 1 SAUDI ARABIA
8 EHHW11HSBB7W HOUSING B 1 KOREA
9 EHHW11T2606W TAPPING SCREW 2.6*6 12 *1
10 EHHW11T2060W TAPPING SCREW 2.0*6 2 *1
11 EHHW11PSSW PIVOT SPRING 1
12 EHHW11SCBW SHAFT COVER 1
13 EHHW11T3012W TORX SCREW 3.0*12 1
14 EHHW11SHBW SHAFT 1
15 EHHW11PPBW PRESS PLATE 1
16 EHHW11SPBW SLIDE PLATE 1
17 EHHW11SSW SLIDE SPRING 1
18 EHHW11LBSW LOCK BUTTON SPRING 1
19 EHHW11LBBW LOCK BUTTON 1
20 EHHW11HBBW HEATER B ASSEMBLY BLOCK 1 (INCLUDE 2 INSULATION TUBES)
21 EHHW11PPCB1W PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL), TAIWAN
21 EHHW11PPCB7W PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL), KOREA
21 EHHW11PPCBW PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL), OTHERS
22 EHHW11C26BW CURL 26 ATTACHMENT 1
- EHHW1113501W INDIVIDUAL PACKAGE 1 (FOR EH-HW11-K135)
- EHHW1161501W INDIVIDUAL PACKAGE 1 (FOR EH-HW11-K615)
- EHHW1164501W INDIVIDUAL PACKAGE 1 (FOR EH-HW11-K645)
- EHHW1165501W INDIVIDUAL PACKAGE 1 (FOR EH-HW11-K655)
- EHHW1166501W INDIVIDUAL PACKAGE 1 (FOR EH-HW11-K665)
- EHHW1167501W INDIVIDUAL PACKAGE 1 (FOR EH-HW11-K675)
- EHHW1168501W INDIVIDUAL PACKAGE 1 (FOR EH-HW51-K685)
- EHHW11S09W PULP FILLER 1
- EHHW1113503W INSTRUCTION BOOKLET 1 TAIWAN
- EHHW11S03W INSTRUCTION BOOKLET 1 OTHERS
- EHHW11S04W EASY MANUAL 1

Model No. : EH-HW32 Exploded View for EH-HW32

Model No. : EH-HW32 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
EH-HW32
1 EHHW32HSABW HOUSING A ASSEMBLY BLOCK 1
2 EHHW32FSW FLOATING SPRING 4 *1
3 EHHW32HABW HEATER A ASSEMBLY BLOCK 1
4 EHHW32PKW PACKING 1
5 EHHW32CCAW CIRCUIT ASSEMBLY BLOCK 1 (INCLUDE 1 INSULATION TUBE, CONNECTOR CO
VER BLOCK)
6 EHHW32CTBW CONNECTOR COVER BLOCK 1
7 EHHW32PCB2W POWER CORD 1 B2-PLUG
7 EHHW32PC7B2W POWER CORD 1 B2-PLUG, KOREA
7 EHHW32PCS3W POWER CORD 1 S3-PLUG
8 EHHW32HSBBW HOUSING B 1 OTHERS
8 EHHW32HSBB6W HOUSING B 1 SAUDI ARABIA
8 EHHW32HSBB7W HOUSING B 1 KOREA
9 EHHW32T2606W TAPPING SCREW 2.6*6 12 *1
10 EHHW32T2060W TAPPING SCREW 2.0*6 2 *1
11 EHHW32PSSW PIVOT SPRING 1
12 EHHW32SCBW SHAFT COVER 1
13 EHHW32T3012W TORX SCREW 3.0*12 1
14 EHHW32SHBW SHAFT 1
15 EHHW32PPBW PRESS PLATE 1
16 EHHW32SPBW SLIDE PLATE 1
17 EHHW32SSW SLIDE SPRING 1
18 EHHW32LBSW LOCK BUTTON SPRING 1
19 EHHW32LBBW LOCK BUTTON 1
20 EHHW32HBBW HEATER B ASSEMBLY BLOCK 1 (INCLUDE 2 INSULATION TUBES)
21 EHHW32PPCBW PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL), OTHERS
21 EHHW32PPCB7W PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL), KOREA
22 EHHW32C26BW CURL 26 ATTACHMENT 1
23 EHHW32C32BW CURL 32 ATTACHMENT 1
24 EHHW32STBW STRAIGHT ATTACHMENT 1
- EHHW3261501W INDIVIDUAL PACKAGE 1 (FOR EH-HW32-K615)
- EHHW3266501W INDIVIDUAL PACKAGE 1 (FOR EH-HW32-K655)
- EHHW3267501W INDIVIDUAL PACKAGE 1 (FOR EH-HW32-K675)
- EHHW3268501W INDIVIDUAL PACKAGE 1 (FOR EH-HW32-K685)
- EHHW32S09W PULP FILLER 1
- EHHW32S03W INSTRUCTION BOOKLET 1
- EHHW32S04W EASY MANUAL 1

Model No. : EH-HW51 Exploded View for EH-HW51

Model No. : EH-HW51 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
EH-HW51
1 EHHW51HSABW HOUSING A ASSEMBLY BLOCK 1
2 EHHW51FSW FLOATING SPRING 4 *1
3 EHHW51HABW HEATER A ASSEMBLY BLOCK 1
4 EHHW51PKW PACKING 1
5 EHHW51CCAW CIRCUIT ASSEMBLY BLOCK 1 (INCLUDE 1 INSULATION TUBE,CONNECTOR COV
ER BLOCK)
6 EHHW51CTBW CONNECTOR COVER BLOCK 1
7 EHHW51PCA2W POWER CORD 1 A2-PLUG, TAIWAN
7 EHHW51PCB2W POWER CORD 1 B2-PLUG
7 EHHW51PCS3W POWER CORD 1 S3-PLUG
8 EHHW51HSBB1W HOUSING B 1 TAIWAN
8 EHHW51HSBBW HOUSING B 1 OTHERS
8 EHHW51HSBB6W HOUSING B 1 SAUDI ARABIA
9 EHHW51T2606W TAPPING SCREW 2.6*6 12 *1
10 EHHW51T2060W TAPPING SCREW 2.0*6 2 *1
11 EHHW51PSSW PIVOT SPRING 1
12 EHHW51SCBW SHAFT COVER 1
13 EHHW51T3012W TORX SCREW 3.0*12 1
14 EHHW51SHBW SHAFT 1
15 EHHW51PPBW PRESS PLATE 1
16 EHHW51SPBW SLIDE PLATE 1
17 EHHW51SSW SLIDE SPRING 1
18 EHHW51LBSW LOCK BUTTON SPRING 1
19 EHHW51LBBW LOCK BUTTON 1
20 EHHW51HBBW HEATER B ASSEMBLY BLOCK 1 (INCLUDE 2 INSULATION TUBES)
21 EHHW51PPCB1W PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL), TAIWAN
21 EHHW51PPCBW PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL), OTHERS
22 EHHW51C26BW CURL 26 ATTACHMENT 1
23 EHHW51C32BW CURL 32 ATTACHMENT 1
24 EHHW51C38BW CURL 38 ATTACHMENT 1
25 EHHW51VLBW VOLUME UP ATTACHMENT 1
26 EHHW51STBW STRAIGHT ATTACHMENT 1
- EHHW5113501W INDIVIDUAL PACKAGE 1 (FOR EH-HW51-K135)
- EHHW5161501W INDIVIDUAL PACKAGE 1 (FOR EH-HW51-K615)
- EHHW5165501W INDIVIDUAL PACKAGE 1 (FOR EH-HW51-K655)
- EHHW5166501W INDIVIDUAL PACKAGE 1 (FOR EH-HW51-K665)
- EHHW5168501W INDIVIDUAL PACKAGE 1 (FOR EH-HW51-K685)
- EHHW51S09W PULP FILLER 1
- EHHW5113503W INSTRUCTION BOOKLET 1 TAIWAN
- EHHW51S03W INSTRUCTION BOOKLET 1 OTHERS
- EHHW51S04W EASY MANUAL 1