Panasonic EH-KA42 User manual

© Panasonic Electric Works (Thailand) Co., Ltd.
2011. All rights reserved. Unauthorized copying and
distribution is a violation of law.
Order Number PEWT1107A24CE
Hair Styler
Model No. EH-KA42
EH-KA22
Asia
TABLE OF CONTENTS PAGE PAGE
1 Specifications ----------------------------------------------------- 2
2 Troubleshooting Guide----------------------------------------- 3
3 Disassembly and Assembly Instructions ---------------- 4
4 Wiring Connection Diagram ---------------------------------- 9
5 Schematic Diagram---------------------------------------------10
6 Exploded View and Replacement Parts List -----------11

2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications

3
3 Troubleshooting Guide
Refer to WIRING CONNECTION DIAGRAM.

4
4 Disassembly and Assembly Instructions
4.1. Disassembly instructions
1. Remove the two Torx screws from the Escutcheon, then remove Escutcheon, the Filter and the Fixing ring as show in figure
1.
2. Separate the Housing A and B by unfastening Housing B at indicated area show in figure 2.

5
4.2. Assembly instructions
1. Assembly Select switch to Heater block by soldering Lead wires connect to the positions which are show in figure 3.
2. Assembly Connector cover block to Heater block by soldering Lead wries connect to the positions which are shown in Figure
4.

6
3. Assembly Rectifier ass'y block to Heater block by soldering Lead wires connect to the positions which are show in figure 5.

7
4. Insert Heater base board C to Motor ass'y block and assembly Diode bridge of Rectifier ass'y block to Motor 's terminals by
solder as show in figure 6.
5. Assembly Select switch to Motor ass'y block ,insert two Lead wires (Black and Red) into slot of Air flow regulator as show in
figure 7.

8
6. Assembly Parts into Housing B step by step as show in figure 8.
7. Assembly Housing A&B together, assembly Fixing ring, Filter, Escutcheon to Housing A&B and in the end tighter two Torx
screws as show in figure 9.

9
5 Wiring Connection Diagram

10
6 Schematic Diagram

Model No. : EH-KA42 Exploded View for EH-KA42
7 Exploded View and Replacement Parts List

Model No. : EH-KA42 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
EH-KA42
1 EHKA42HSVW HOUSING AB 1
2 EHKA42FTVW FILTER 1
3 EHKA42FRHW FIXING RING 1
4 EHKA42CTBW CONNECTOR COVER BLOCK 1
5 EHKA42PCHB2W POWER CORD 1 (B2-PLUG)
6 EHKA42MBW MOTOR BLOCK 1
7 EHKA42SSW SELECT SWITCH 1 (INCLUDE 3 INSULATION TUBES)
8 EHKA42ITBW INSULATION TUBE 3 (3PCS/PACK)
9 EHKA42ASPVW ARM SWITCH PLATE 1
10 EHKA42HBW HEATER BLOCK 1
11 EHKA42RFBW RECTIFIER ASS'Y BLOCK 1
12 EHKA42CSHW COIL SPRING 1
13 EHKA42PBVW PUSH BUTTON 1
14 EHKA42SPVW SWITCH PLATE 1
15 EHKA42T2604W TORX SCREW 2 *1
16 EHKA42ESW ESCUTCHEON 1
17 EHKA42NZVW NOZZLE 1
18 EHKA42BRAVW ROLLER BRUSH 1
19 EHKA42BAVW BLOW BRUSH 1
20 EHKA42SRVW SLIM ROLLER BRUSH 1
- EHKA42S03UW OPERATING INSTRUCTUIONS 1
- EHKA4261501W INDIVIDUAL PACKAGE 1 (FOR CODE V615 : INDIA)
- EHKA4264501W INDIVIDUAL PACKAGE 1 (FOR CODE V645 : VIETNAM)
- EHKA42S09W PULP FILLER FOR PACKAGE 1

Model No. : EH-KA22 Exploded View for EH-KA22

Model No. : EH-KA22 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
EH-KA22
1 EHKA22HSVW HOUSING AB 1
2 EHKA22FTVW FILTER 1
3 EHKA22FRHW FIXING RING 1
4 EHKA22CTBW CONNECTOR COVER BLOCK 1
5 EHKA22PCHB2W POWER CORD 1 (B2-PLUG)
6 EHKA22MBW MOTOR BLOCK 1
7 EHKA22SSW SELECT SWITCH 1 (INCLUDE 3 INSULATION TUBES)
8 EHKA22ITBW INSULATION TUBE 3 (3PCS/PACK)
9 EHKA22ASPVW ARM SWITCH PLATE 1
10 EHKA22HBW HEATER BLOCK 1
11 EHKA22RFBW RECTIFIER ASS'Y BLOCK 1
12 EHKA22CSHW COIL SPRING 1
13 EHKA22PBVW PUSH BUTTON 1
14 EHKA22SPVW SWITCH PLATE 1
15 EHKA22T2604W TORX SCREW 2 *1
16 EHKA22ESW ESCUTCHEON 1
17 EHKA22NZVW NOZZLE 1
18 EHKA22BRAVW ROLLER BRUSH 1
- EHKA22S03UW OPERATING INSTRUCTUIONS 1
- EHKA2261501W INDIVIDUAL PACKAGE 1 (FOR CODE V615 : INDIA)
- EHKA2264501W INDIVIDUAL PACKAGE 1 (FOR CODE V645 : VIETNAM)
- EHKA22S09W PULP FILLER FOR PACKAGE 1