Panasonic EH-HW11 User manual

© Panasonic Corporation 2012 Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO. PEWT1203Z34CE
(Household) Multi-styling Straightener
Model No. EH-HW11
Model No. EH-HW32
CHINA
TABLE OF CONTENTS
PAGE PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 5
5 Wiring Connection Diagram ---------------------------------10
6 Schematic Diagram ---------------------------------------------10
7 Exploded View and Replacement Parts List -----------11

2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) a higher. Please
use a oldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please becareful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
Model EH-HW11 EH-HW32
Power source/Power consumption AC 100-130V 50-60 Hz 37W(Max.400W)
AC 220-240V 50-60 Hz 39W(Max.400W)
Iron Plate Temperature 130 - 170 °C (5 Level adjustable)
Cord length A2 Plug 1.7 m
Weight A2 = 346 g.
Attachment 1 type 3 type

3
3 Troubleshooting Guide
(Refer to Wiring Connection Diagram)

4

5
4 Disassembly and Assembly Instructions
4.1. Disassembly Instructions
1. Remove Shaft Cover from Main Body by Slotted screw
driver(Minus Driver).
2. Remove Torx screws at Shaft position by Phillips screw
driver (Plus Driver).
3. Remove Shaft out by tiny-shaped Phillips screw drivers
(Plus Driver) and pull it out from the main body.
4. Remove Pivot spring by gripping and pulling it out from
the Main body.
5. Remove 6 screws for fitting Press Plate side by Phillips
screw drivers (Plus Driver).
6. Remove Press Plate Cover at the Hook part by Slotted
screw driver (Minus Driver).

6
7. Remove Lock Button and Lock Button Spring.
8. Remove Iron Plate of Heater B from Hook.
9. Remove Slide Plate and Slide Spring.
10. Take off Press Plate.
11. Remove 2 screws of the Housing side by Phillips screw
driver (Plus Driver).
12. Remove 6 screws by Phillips screw driver (Plus Driver).

7
13. Remove Housing A from Housing B in Grip follow as
below drawing.
14. Take off Iron Plate and Circuit assembly b/k from Hous-
ing A.

8
4.2. Assembly and Disassembly Points
1. Shaft Cover fixing point.
2. Housing B Assembly Point.

9
4.3. Lead wire of Iron Plate(Heater A, Heater B) and Circuit arrangement
points.
1. Lead wire of Iron Plate(Heater A assembly b/k) and Circuit assembly b/k arrangement follows as below.
2. Lead wire of Iron Plate(Heater B assembly b/k) arrangement follows as below.
3. Shaft Cover must be control direction follow as below.

10
5 Wiring Connection Diagram
6 Schematic Diagram

Model No. : EH-HW11 EH-HW32 Model No. : EH-HW11 Exploded View for EH-HW11
- 1 -

Model No. : EH-HW11 EH-HW32 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
1 EHHW11HSAPW HOUSING A ASSEMBLY BLOCK 1
2 EHHW11FSW FLOATING SPRING 4 *1
3 EHHW11HAPW HEATER A ASSEMBLY BLOCK 1
4 EHHW11PKW PACKING 1
5 EHHW11CCA8W CIRCUIT ASSEMBLY BLOCK 1 (INCLUDE 1 INSULATION TUBE, CONNECTOR CO
VER BLOCK)
6 EHHW11CTBW CONNECTOR COVER BLOCK 1
7 EHHW11PCH9W POWER CORD 1
8 EHHW11HSBPW HOUSING B 1
9 EHHW112660UW TAPPING SCREW 2.6*6 12 *1
10 EHHW112060UW TAPPING SCREW 2.0*6 2 *1
11 EHHW11PSSW PIVOT SPRING 1
12 EHHW11SCPW SHAFT COVER 1
13 EHHW11T3010W TORX SCREW 3.0*10 1
14 EHHW11SHPW SHAFT 1
15 EHHW11PPPW PRESS PLATE 1
16 EHHW11SPPW SLIDE PLATE 1
17 EHHW11SSW SLIDE SPRING 1
18 EHHW11LBSW LOCK BUTTON SPRING 1
19 EHHW11LBPW LOCK BUTTON 1
20 EHHW11HBPW HEATER B ASSEMBLY BLOCK 1 (INCLUDE 2 INSULATION TUBES)
21 EHHW11PPCPW PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL)
22 EHHW11C26PW CURL 26 ATTACHMENT 1
- EHHW1149501W INDIVIDUAL PACKAGE 1
- EHHW11S09W PULP FILLER 1
- EHHW1149503W OPERATING INSTRUCTUIONS 1
- 2 -

Model No. : EH-HW11 EH-HW32 Model No. : EH-HW32 Exploded View for EH-HW32
- 3 -

Model No. : EH-HW11 EH-HW32 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
1 EHHW32HSAWW HOUSING A ASSEMBLY BLOCK 1
2 EHHW32FSW FLOATING SPRING 4 *1
3 EHHW32HAWW HEATER A ASSEMBLY BLOCK 1
4 EHHW32PKW PACKING 1
5 EHHW32CCA8W CIRCUIT ASSEMBLY BLOCK 1 (INCLUDE 1 INSULATION TUBE, CONNECTOR CO
VER BLOCK)
6 EHHW32CTBW CONNECTOR COVER BLOCK 1
7 EHHW32PCH9W POWER CORD 1
8 EHHW32HSBWW HOUSING B 1
9 EHHW322660UW TAPPING SCREW 2.6*6 12 *1
10 EHHW322060UW TAPPING SCREW 2.0*6 2 *1
11 EHHW32PSSW PIVOT SPRING 1
12 EHHW32SCWW SHAFT COVER 1
13 EHHW32T3010W TORX SCREW 3.0*10 1
14 EHHW32SHWW SHAFT 1
15 EHHW32PPWW PRESS PLATE 1
16 EHHW32SPWW SLIDE PLATE 1
17 EHHW32SSW SLIDE SPRING 1
18 EHHW32LBSW LOCK BUTTON SPRING 1
19 EHHW32LBWW LOCK BUTTON 1
20 EHHW32HBWW HEATER B ASSEMBLY BLOCK 1 (INCLUDE 2 INSULATION TUBES)
21 EHHW32PPCWW PRESS PLATE COVER 1 (INCLUDE 1 ALUMINUM SEAL)
22 EHHW32C26WW CURL 26 ATTACHMENT 1
23 EHHW32C32WW CURL 32 ATTACHMENT 1
24 EHHW32C38WW CURL 38 ATTACHMENT 1
- EHHW3249501W INDIVIDUAL PACKAGE 1
- EHHW32S09W PULP FILLER 1
- EHHW3249503W OPERATING INSTRUCTUIONS 1
- 4 -