Panasonic EH-HW13 User manual

© Panasonic Electric Works (Thailand) Co., Ltd.
2011. All rights reserved. Unauthorized copying and
distribution is a violation of law.
Order Number PEWT1109A28CE
Compact Multi Straightener
Model No. EH-HW13
Asia
Middle East
TABLE OF CONTENTS PAGE PAGE
1 Warning-------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Wiring Connection Diagram ---------------------------------- 7
6 Schematic Diagram---------------------------------------------- 8
7 Exploded View and Replacement Parts List ------------ 9

2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications

3
3 Troubleshooting Guide

4
4 Disassembly and Assembly Instructions
4.1. Disassembly Instructions
1. Insert a small flat head screwdriver into the groove of the
Shaft Cover as shown in Figure 4.
2. Remove the Shaft screw and take off the Shaft from Main
body as shown in Figure 5.
3. Remove the spring by pull out the Housing side and
Press plate side as shown in Figure 6.
4. Using a screwdriver remove the two tapping screws from
Press plate cover as shown in Figure 7.
*Be careful not to lose the spring *
5. Take off the Press plate cover as shown in Figure 8.

5
6. Remove the Iron Plate ass'y B/K of Press plate side as
shown in Figure 9.
7. Using screwdriver remove the 2 tapping screws and 1
torx screw as shown in Figure 10.
8. Take off the Housing B as shown in Figure 11.
9. Remove the Iron Plate ass'y B/K of Housing side as
shown in Figure 12.

6
4.2. Assembly Instructions
1. Arrange Lead wire into rib of Press plate as shown in Figure 13.
• Arrange Lead wire into rib of Housing A as shown in Figure 14.
2. Put Housing B and Housing A together as shown in Figure 15.
• Ensure that the power cord is attached to the connector cover.
(Apply grease floil at the power cord terminal )
3. Fixing Shaft cover follow hook direction as shown in Figure 16.

7
5 Wiring Connection Diagram

8
6 Schematic Diagram

Model No. : EH-HW13 Exploded View
7 Exploded View and Replacement Parts List

Model No. : EH-HW13 Parts List
Safety
Ref.
No. Part No. Part Name & Description Q'ty Remarks
1 EHHW13CBW CAP (BLACK) 1 (FOR BLACK)
1 EHHW13CWW CAP (WHITE) 1 (FOR WHITE)
2 EHHW13HSABW HOUSING A (BLACK) 1 (FOR BLACK)
2 EHHW13HSAWW HOUSING A (WHITE) 1 (FOR WHITE)
3 EHHW13STDVW STONE (DARK VIOLET) 1 (FOR BLACK)
3 EHHW13STVW STONE (VIOLET) 1 (FOR WHITE)
4 EHHW13IPABW IRON PLATE ASSEMBLY (BLACK) 1 (FOR BLACK, OTHERS)
4 EHHW13IPAB6W IRON PLATE ASSEMBLY (BLACK) 1 (FOR BLACK, Middle East)
4 EHHW13IPAWW IRON PLATE ASSEMBLY (WHITE) 1 (FOR WHITE, OTHERS)
4 EHHW13IPAW4W IRON PLATE ASSEMBLY (WHITE) 1 (FOR WHITE, VIETNAM)
5 EHHW13CTBW CONNECTOR COVER B/K 1
6 EHHW13PCBB2W POWER CORD (BLACK) 1 (FOR BLACK, B2-PLUG)
6 EHHW13PCBS3W POWER CORD (BLACK) 1 (FOR BLACK, S3-PLUG)
6 EHHW13PCHB2W POWER CORD (GRAY) 1 (FOR WHITE, B2-PLUG)
6 EHHW13PCHS3W POWER CORD (GRAY) 1 (FOR WHITE, S3-PLUG)
7 EHHW132608BW TAPPING SCREW 2.6*8 (BLACK) 4 (FOR BLACK)
7 EHHW132608SW TAPPING SCREW 2.6*8 (SILVER) 4 (FOR WHITE)
8 EHHW133010BW TORX SCREW 3*10 (BLACK) 2 (FOR BLACK)
8 EHHW133010SW TORX SCREW 3*10 (SILVER) 2 (FOR WHITE)
9 EHHW13PSW PIVOT SPRING 1
10 EHHW13PPCBW PRESS PLATE COVER (BLACK) 1 (FOR BLACK)
10 EHHW13PPCWW PRESS PLATE COVER (WHITE) 1 (FOR WHITE)
11 EHHW13SPBW SWITCH PLATE (BLACK) 1 (FOR BLACK)
11 EHHW13SPWW SWITCH PLATE (WHITE) 1 (FOR WHITE)
12 EHHW13MSW MAIN SWITCH 1
13 EHHW13LWAW LEAD WIRE (ORANGE) 1
14 EHHW13PPBW PRESS PLATE (BLACK) 1 (FOR BLACK)
14 EHHW13PPWW PRESS PLATE (WHITE) 1 (FOR WHITE)
15 EHHW13SCBW SHAFT COVER (BLACK) 1 (FOR BLACK)
15 EHHW13SCWW SHAFT COVER (WHITE) 1 (FOR WHITE)
16 EHHW13SHBW SHAFT (BLACK) 1 (FOR BLACK)
16 EHHW13SHWW SHAFT (WHITE) 1 (FOR WHITE)
- EHHW13S03UW OPERATING INSTRUCTION 1
- EHHW13615KW INDIVIDUAL PACKAGE 1 (FOR BLACK, India)
- EHHW13665KW INDIVIDUAL PACKAGE 1 (FOR BLACK, Middle East)
- EHHW13685KW INDIVIDUAL PACKAGE 1 (FOR BLACK, Singapore)
- EHHW13615WW INDIVIDUAL PACKAGE 1 (FOR WHITE, India)
- EHHW13645WW INDIVIDUAL PACKAGE 1 (FOR WHITE, Vietnam)
- EHHW13655WW INDIVIDUAL PACKAGE 1 (FOR WHITE, Malaysia)
- EHHW13685WW INDIVIDUAL PACKAGE 1 (FOR WHITE, Singapore)
- EHHW13S09W PULP FILLER 1
- EHHW13S04W EASY MANUAL 1